• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.11
• /
• pp.603-610
• /
• 2016

This work studies the synthesis of birnessite (${\delta}-MnO_2$), a catalyst of oxidative-coupling reactions, from the powder of spent alkaline manganese batteries (SABP, <8 mesh) and evaluate its reactivity for 1-naphthol (1-NP) removals. Manganese oxides using commercial reagents ($MnSO_4$, $MnCl_2$) and the acid birnessite (A-Bir) by McKenzie method were also synthesized, and their crystallinity and reactivity for 1-NP were compared with one another. 96% Mn and 98% Zn were extracted from SABP by acid leaching at the condition of solid/liquid (S/L) ratio 1:10 in $1.0M\;H_2SO_4+10.5%\;H_2O_2$ at $60^{\circ}C$. From the acid leaching solution, 69% (at pH 8) and 94.3% (pH>13) of Mn were separated by hydroxide precipitation. Optimal OH/Mn mixing ratio (mol/mol) for the manganese oxide (MO) synthesis by alkaline (NaOH) hydrothermal techniques was 6.0. Under this condition, the best 1-NP removal efficiency was observed and XRD analysis confirmed that the MOs are corresponding to birnessite. Kinetic constants (k, at pH 6) for the 1-NP removals of the birnessites obtained from Mn recovered at pH 8 (${Mn^{2+}}_{(aq)}$) and pH>13 ($Mn(OH)_{2(s)}$) are 0.112 and $0.106min^{-1}$, respectively, which are similar to that from $MnSO_4$ reagent ($0.117min^{-1}$). The results indicated that the birnessite prepared from the SABP as a raw material could be used as an oxidative-coupling catalyst for removals of trace phenolic compounds in soil and water, and propose the recycle scheme of SAB for the birnessite synthesis.

• Journal of Bio-Environment Control
• /
• v.26 no.2
• /
• pp.115-122
• /
• 2017

Objective of this research was to investigate the influence of lowered substrate pH on the reduction of bicarbonate injury in the vegetative growth of 'Ssanta' strawberry. The acid substrate was formulated by mixing sphagnum peat moss with pine bark (5:5, v/v) and the pH, EC, and CEC of the substrate were 4.07, $0.46dS{\cdot}m^{-1}$, and $91.3cmol^+{\cdot}kg^{-1}$, respectively. To adjust the pH of acid substrate, various amount of dolomitic lime [$CaMg(CO_3)_2$] were incorporated with the rate of 0 (untreated), 1, 2, 3, and $4g{\cdot}L^{-1}$. Then, mother plants were transplanted and grown with fertilizer solution containing $240mg{\cdot}L^{-1}$ of the $HCO_3{^-}$ and equal concentrations of essential nutrients to Hoagland solution. In growth of 'Ssanta' strawberry, fresh weight of mother plants were the highest in the treatment of $2g{\cdot}L^{-1}$ dolomitic lime such as 102.1 g followed by 94.7 g in $1g{\cdot}L^{-1}$, 91.2 g in $3g{\cdot}L^{-1}$, 75.7 g in $0g{\cdot}L^{-1}$ and 72.3 g in $4g{\cdot}L^{-1}$ treatments. The dry weight showed a similar tendency to fresh weight. At 140 days after transplanting, 5.8, 9.8, 11.8, 8.8, and 5.0 daughter plants were derived from each of the mother plants in the treatments of 0, 1, 2, 3, and $4g{\cdot}L^{-1}$ dolomitic lime, respectively. The highest occurrence of daughter plants were observed in the treatments $2g{\cdot}L^{-1}$ dolomitic lime. The substrate pH and bicarbonate concentration of 'Ssanta' strawberry seedlings in the 1 and $2g{\cdot}L^{-1}$ dolomitic lime treatments were maintained at a proper range such as 5.6 to 6.2. The micro-nutrient contents of above ground tissue in mother plants were the highest in $2g{\cdot}L^{-1}$ and the lowest in $4g{\cdot}L^{-1}$ dolomitic lime treatment. The above results indicate that incorporation rate of dolomitic lime in acid substrate with the pH of around 4 is $2g{\cdot}L^{-1}$ to raise the 'Ssanta' strawberry in propagation.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.24 no.4
• /
• pp.11-17
• /
• 2022

Ginseng hydroponic cultivation was cultivated as a nutrient solution and the growth was investigated 60 days later. The length(cm) increased from EC1.0 and EC2.0 concentrations to 5.47cm before, followed by EC0.5, 2.5, 1.5, and 0.0. The weight(g) increased from EC1.0 concentration to 2.39g before, followed by EC1.5, 2.5, 0.5, 0.0 and 2.0. The width(mm) increased from EC1.0 concentration to 1.9mm than before, followed by EC2.5, 0.5, 1.5, 2.0, and 0.0. In the ginseng growth experiment according to nutritional components, the average length of NO₃-N mixed experiment increased to 0.33cm, the average weight of 0.04g, and the average width of 0.35mm. In the experiment in which NH₄-N was mixed without NO₃-N, the growth was reduced to 0.37cm in average length, 0.03g in average weight, and 0.22mm in average width. In an experiment in which germanium(Ge) is mixed with a nutrient component, the average length is increased to 0.33cm, the average weight is increased to 0.04g, and the average width is increased to 0.35mm, but in an experiment excluding germanium(Ge), the growth is reduced to 0.11cm, the average weight is 0.04g, and the average width is 0.03mm.

• The Korean Journal of Mycology
• /
• v.4 no.1
• /
• pp.31-44
• /
• 1976

The studies were carried out to examine the effects of supplementation of nutritional substances and physical conditions in substrate on the mycelial growth and yield of fresh sporophores of winter mushroom, Flammulina velutipes(Curt. ex Fr.) Sing. and to obtain further informations on the nutritional requirements of the fungus with reference to improvement of substrate through [analysis of chemical composition of the substrates during the cultivation period. The results obtained are summarized as follows: 1. The best yield of fresh sporophores, 84.4 g per 280 g substrate in a bottle, was obtained from the mixture of poplar sawdust 10 and rice bran 3 by volume when Flammulina velutipes was cultivated on the poplar sawdust supplemented by rice bran, wheat bran, cattle manure and various combinations of these materials as nutrient sources. The substrates of poplar sawdust 10 plus rice bran 3 and 2 or wheat bran 3 with a higher yield of fresh sporophores showed a comparatively higher content of total nitrogen. total sugar, and potassium. 2. The mycelial growth of the fungus was compared on the substrates of poplar sawdust supplemented by the several nutrient sources and poplar sawdust alone. The fastest linear growth occurred on substrates of poplar sawdust alone and poplar sawdust plus cattle manure deficient in sugar and nitrogen sources, but mycelial density was more sparse on the substrates. Also, growth in a solution extracted from these substrates was very meager. 3. In the substrates which varied with bulk density and moisture content optimum bulk density and moisture content for mycelial growth was 0.2g/cc and 72% on a dry weight basis, respectively, but the highest yield of fresh sporophores was obtained at the bulk density of 0.3g/cc and moisture content of 67%. 4. By increasing the ratio of rice bran in poplar sawdust the loss of total weight and ash, content at each stage was increased, and during the cultivation period of 75 days, loss of total weight of the substrates at inoculation was 17.8 to 28.8% and ash content increased about 12%. 5. 11 to 14% of the cellulose and 3 to 4% of the lignin content per original substrate were decreased without a great difference depending of the mixing ratio of rice bran. The soluble glucose concentration in the substrates was increased during the same period. 6. In the process of vegetative and reproductive growth of the fungus upon the substrates, the total nitrogen was increased in quantity per dry weight of sample but was reduced in absolute quantity to a minute extent. There is no great changes in content of organic nitrogen including amino acid nitrogen, and hydrolysable ammonium nitrogen during the vegetative growth period, but occurrence of sporophores resulted in a decrease in the nitrogen content of these forms. On the one hand, by an increase of additive amounts of rice bran, nitrogen contents of these forms were higher and the reduction range during the reproductive growth period became wider. 7. Mycelial growth of the fungus was accelerated in various liquid media supplemented with organic nitrogen sources such as peptone and yeast extract in comparison with addition of inorganic nitrogen sources. Furthermore, mycelial growth was mere vigorous in the media with higher content of organic nitrogen sources.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.25 no.2
• /
• pp.79-92
• /
• 1992

This study was carried out to develop new techniques useful for cryopreservation, thawing and artificial insemination, and ultrastructural changes of cryopreserved spermatozoa in rainbow trout(Oncorhynchus mykiss) . Two extenders, such as Tyrode solution and Whittingham's $T_6$ solution, were used to preserve rainbow trout sperm in refrigerator $(-20,\;-40\;and\;-70^{\circ}C)$ or liquid nitrogen $%(-196^{\circ})$. Hand-stripped semen was diluted to 1:16 with two extenders, an then the semen were frozen after mixing semen and each extender containing 1M or 1.5M DMSO solution to 1:1. After 60 days cryopreserved semen was thawed in a $13^{\circ}$ water bath, and subsequently centrifugated. After centrifugation at 1,000 rpm for 5 min thawed semen was washed with extenders, and then fertilized with fresh eggs. The results obtained in these experiments were summarized as follows: After cryopreservation, over 75% of spermatozoa were appeared motile and the survival rate was high. Following cryopreservation by the addition of cryoprotectant such as DMSO, methanol and glycerol, the fertilization rate of the thawed spermatozoa appeared over $99\%$ compared with the control having $99\%$ of fertilization rate. There was no difference between the control and experimental groups such as $(-20^{\circ}C\;-40^{\circ}C\;and\;-70^{\circ}C)$ and $-196^{\circ}$ in fertilization rate. Following cryopreservation at $-196^{\circ}$ by the addition of 1M DMSO of cryoprotectant, each fertilization rate following 24 hours and hatching rate following 24 days showed $96\%$ and $8\%$ by the addition of BSA, but showed $98\%\;and\;10%$ by no addition of BSA. Following 2 months of cryopreservation by the addition of 1M DMSO of cryoprotectant, there were $10%$ of hatching rate at $-196^{\circ}\;and\;10\%\;and\;35\%,\;respectively,\;at\;-40^{\circ}C\;and\;-70^{\circ}C$. Following 2 months of cryopreservation by the addition of 1M methanol of cryoprotectant, there were $22\%$ of fertilization rate at $-20^{\circ}C,\;and\;28\%,\;at\;-70^{\circ}C$ Following 2 months of cryopreservation by the addition of 1M glycerol of cryoprotectant, there were $22\%$ of fertilization rate at $-20^{\circ}C$, and $33\%,\;at\;-70^{\circ}C$. pollowing 2 months of cryopreservation by the addition of 1.5M DMSO of cryoprotectant, there were $27\%$ of fertilization rate at $-20^{\circ}C,\;an\;36\%\;and \;35\%,\;respectively,\;at\;-40^{\circ}C\;and\;-70^{\circ}C$. Following 2 months of cryopreservation by the addition of 1.5M glycerol of cryoprotectant, there were $34\% \;of\;fertilization\;rate\;at\;-20^{\circ}C, \;and\;31\%\;and\;31\%,\;respectively,\;at \;-40^{\circ}C\;and\;-70^{\circ}$. Following 2 months of cryopreservation by the addition of 1.5M methanol of cryoprotectant, there were $28\%$ of fertilization rate at $-20^{\circ}C,\;and\;29\%\;and\;28\%,\;respectively,\;at\;-40^{\circ}C\;and\;-70^{\circ}C.$ From 10 days and 15 days following fertilization at $13^{\circ}C\;and\;10^{\circ}C$, respectively, the mortality rate of fertilized ova was markedly increased. The middle piece of spermatozoa had two set of central doublets, nine set of outer coarse fibres, and mitochondrial sheath. Spermatozoa went through morphological changes during storage, e.g. winding of flagella, detachment of the nuclear envelope and the plasma membrane from the nucleus of the sperm head. There were $1\%$ abnormal spermatozoa in fresh sperm and about $15\%$ during storage.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.11 no.1
• /
• pp.1604-1615
• /
• 1969

This experiment was carried out as one of the basic studies to improve the acid resistance of concrete and it was conducted to investigate some relations among physical properties such as basorption, ratio of water to cement, compressive strength, density and ratio of mix to weight losses of mortar when exposed to 0.1 N solution of hydrochrolic acid. The results obtained from the limited data secured so far in this experiment are summarized as follows: 1. The specimens used in the experiment were made of 5 cubic centimeters of mortar having such various ratios of mix by weight as 1 : 1, 1 : 3, 1 : 5, 1 : 7, 1 : 10. 2. Physical tests included compressive strengths at 7 days, 28 days, 3 months, and 6 month, and 5 hour boiling absorption test. 3. In acid test, every specimen was immersed into 0.1 N solution of hydrochrolic acid. The specimens exposed to the acid solution were weighed to determine the weight losses of the acid-corroded at one week interval for 7 weeks exposure, and the old acid solutions were also changed to fresh one when weighed the weight losses by acid attack at one week interval. 4. The correlative relations were found among physical properties and they are expressed by certain formulas as follows; i) Relation between ratio of mix and absorption Y = 1.036x + 13.53 where Y: absorption(%) X: ratio of mix ii) Relation between ratio of mix and ratio of water-cement Y = 0.204x + 0.214 where Y: ratio of water-cement. X: ratio of mix iii) Relation between ratio of water-cement and absorption Y = 5.01x + 12.53 where Y: absorption(%). X: ratio of water-cement iv) Relation between density and absorption Y = 50.6 - 0.0176X where Y: absorption(%). X: density($kg/m^3$) v) Relation between density and ratio of water cement Y = 7.2183 - 0.0033X where Y: ratio of water-cement . X: density($kg/m^3$) 5. After completing the acid exposure test the specimens were corroded and , the per cent ranges of weight losses varies from a minimum of 20.4 per cent at a 1 : 1 mix to a maximum of 92.0 per cent at a 1:10 mix 6. The correlative relations of physical properties of mortar to weight losses by acid attak were found and they are also expressed by certain formulas as follows: i) Relation between weight losses and ratio of mix Y = 8.59X + 8.63 where Y: weight losses(%), X: ratio of mix ii) Relation between wieght losses and absorption Y = 0.121x + 12.43 where Y: absorption(%). X: weight losses(%) iii) Relation between weight losses and ratio of w/c Y = 0.0226X + 0.07 where Y: ratio of w/c X: weight losses(%) iv) Relation between weight losses and compressive strength LogY = 3.6097 - 0.05058X + 0.00022$X^2$ where Y: compressive strength ($kg/cm^3$) X: weight losses(%) v) Relation between weight losses and density Y = 2153.1 - 6.62X where Y: density($kg/m^3$) X: weigh losses(%) 7. In order to make better acid resistant mortar, it could be concluded that a 1 : 3 mix or richer mixes, adequate mixing water to minnimize the ratio of water-cement considering the workability, 16 per cent or less absorption by 5 hour boiling water, 1,800 kilogram per cubic meter or denser density by absolute weight base and 200 kilogram per square meter or compressive strength at 20 day, etc are required so as to obtain acid-resistant mortar. In addition to the above, it might be recommonded to select the fine aggregate and to use better equipments such as a mechanical vibrator, a mechanical mixer etc. in concrete manufacturing works.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.33 no.5
• /
• pp.455-462
• /
• 2000

The objective of this study was to examine the physicochemical characteristics of coagulation reaction between loess and red tide organisms (RTO) and its feasibility, in developing a technology for the removal of RTO bloom in coastal sea. The physicochemical characteristics of loess were examined for a particle size distribution, surface characteristics by scanning electron microscope, zeta potential, and alkalinity and pH variations in sea water. Two kinds of RTO that were used in this study, Cylindrothen closterium and Skeietonema costatum, were sampled in Masan bay and were cultured in laboratory. Coagulation experiments were conducted using various concentrations of loess, RTO, and a jar tester. The supernatant and RTO culture solution were analyzed for pH, alkalinity, RTO cell number. A negative zeta potential of loess increased with increasing pH at $10^(-3)M$ NaCl solution and had -71.3 mV at pH 9.36. Loess had a positive zeta potential of +1,8 mV at pH 1.98, which resulted in a characteristic of material having an amphoteric surface charge. In NaCl and $CaCl_2$, solutions, loess had a decreasing negative zeta potential with increasing $Na^+\;and\;Ca^(+2)$ ion concentration and then didn't result in a charge reversal due to not occurring specific adsorption for $Na^+$ ion while resulted in a charge reversal due to occurring specific adsorption for $Ca^(+2)$ ion. In sea water, loess and RTO showed the similar zeta potential values of -112,1 and -9.2 mV, respectively and sea sand powder showed the highest zeta potential value of -25.7 mV in the clays. EDLs (electrical double-layers) of loess and RTO were extremely compressed due to high concentration of salts included in sea water, As a result, there didn't almost exist EDL repulsive force between loess and RTO approaching each other and then LVDW (London-yan der Waals) attractive force was always larger than EDL repulsive force to easily form a floe. Removal rates of RTO exponentially increased with increasing a loess concentration. The removal rates steeply increased until $800 mg/l$ of loess, and reached $100{\%}$ at 6,400 mg/l of loess. Removal rates of RTO exponentially increased with increasing a G-value. This indicated that mixing (i.e., collision among particles) was very important for a coagulation reaction. Loess showed the highest RTO removal rates in the clays.

• Applied Chemistry for Engineering
• /
• v.21 no.4
• /
• pp.377-384
• /
• 2010

We perform a comparative study to investigate the properties of the new energetic chain extender (AzPD). A series of poly(glycidyl azide)/poly(tetramethylene oxide)-based energetic segmented polyurethane (GAP/PTMG ESPU) with different chain extender, which is 3-azidopropane-1,2-diol (AzPD), 1,4-butane diol (1,4-BD), or 1,5 pentane diol (1,5-PD), was synthesized by solution polymerization in dimethyl formamide (DMF) and their phase behaviors were investigated. The ESPUs were characterized with Fourier transform infrared-attenuated total reflection spectroscopy (ATR FT-IR), differential scanning calorimetry (DSC), and dynamic mechanical analysis (DMA). The results of the ATR FT-IR analysis of the urethane carbonyl group region showed that the 'free' C=O fraction was higher in GAP/PTMG AzESPU (0.5) than GAP/PTMG BDESPU (0.44) and GAP/PTMG PDESPU (0.41) for 7 days samples after preparation and that it was similar in the range of 0.26~0.29 for three 60 days ESPU samples. DMA curves of the GAP/PTMG AzESPU for 7 days samples showed amorphous polymers, but GAP/PTMG BDESPU and GAP/PTMG PDESPU showed viscoelastic behaviors with rubbery plateau and the flow region. However, DMA curves of the GAP/PTMG AzESPU for 60 days samples showed viscoelastic behaviors with rubbery plateau and the flow region like GAP/PTMG PDESPU, but GAP/PTMG BDESPU did not show the flow region. From phase behaviors with ATR FT-IR, DSC and DMA analysis, GAP/PTMG AzESPU showed good phase-mixing between components. However, it represented viscoelastic behavior of TPE similar to GAP/PTMG PDESPM according to phase equilibrium progress with aging time.

• Journal of Animal Environmental Science
• /
• v.13 no.2
• /
• pp.129-138
• /
• 2007

A natural deodorizing agent (NDA) was made using pine cone byproduct, and its effects on malodor emission and composting were analyzed in this study. NDA was manufactured by mixing pine cone byproduct with three species of microorganisms and water containing mineral nutrients and molasses, and then by incubating for 48 hours at $30^{\circ}C$. Lab scale experiments were done with three treatment groups, T1 (control, sawdust treatment), T2 (microorganisms and sawdust treatment group), and T3 (NDA and sawdust treatment group). During composting, temperatures reached over $55^{\circ}C$, a minimum temperature for the inactivation of pathogenic microorganisms. No differences were found in physicochemical composition of compost among treatments. However, it was observed that over usage of NDA could obstruct temperature increase, since the biodegradation rate of organic matter of NDA was relatively low, Nitrogen loss due to ammonia gas emission, which normally happens during composting, was reduced by using NDA, and hence the nitrogen level of final compost was higher in T3 than in others. During experiment, it was found that ammonia gas emission was entirely lasted through compositing duration, but the $CH_3SH$ and $H_2S$ gases were produced only at early stage of composting. The ammonia concentration trapped in $H_2SO_4$ solution during 31 days of composting in T1, T2 and T3 was 12,660mg/L, 11,598mg/L and 7,367mg/L, respectively, showing distinguishable reduction of ammonia gas emission in T3. The emissions of $CH_3SH$ and $H_2S$ gases were also remarkably reduced in T3. Based on these obtained results, usage of the deodorizing agent made with pine cone byproduct could reduce the emission of malodor during composting, without any deterioration of compost quality.

• Journal of Environmental Science International
• /
• v.3 no.3
• /
• pp.273-284
• /
• 1994

The primary objective of this study was to examine the toxic effects of PCP on activated sludge and to analyze its metabolic responses while treating wastewater containing pentachlorophenol (PCP) in a sequencing batch reactor (SBR) system operating under different control strategies. This study was conducted in two phases 1 and 2 (8-hr and 12-hr cycles). Each phase was operated with two control strategies I and II. Strategy I (reactor 1) involved rapid addition (5 minutes to complete) of substrate to the reactor with continuous mixing but no aeration for 2 hours. Strategy ll (reactor 2) involved adding the feed continuously during the first 2 hours of the cycle when the system was mixed but not aerated. During both phases each reactor was operated at a sludge age of 15 days. The synthetic wastewater was used as a feed. The COD of the feed solution was about 380 mg/l. After the reference response for both reactors was established, the steady state response of each system was established for PCP feed concentrations of 0.1 mg/l, 1.0 mg/l, and 5.0 mg/l in SBR systems operating on both 8-hr and 12-hr cycles. Soluble COD removal was not inhibited at any feed PCP concentrations used. At 5.0 mg/l fined PCP concentration and in SBR systems operating on phase 2, the concentrations of MLVSS were decreased; selective pressure on the mixed biomass might be increased, narrowing the range of possible ecological responses; the settleability of activated sludge was poor; the SOURS were increased, showing that the systems were shocked. Nitrification was made to some extent at all concentrations of feed PCP in SBR systems operating on phase 2 whereas in SBR systems operating on phase 1 little nitrification was observed. Then, nitrification will be delayed as much as soluble COD removal is retarded due to PCP inhibition effects. Enhanced biological phosphorus removal occurring in the system operating with control strategy I during phase 1 of this work and in the presence of low concentrations of PCP was unreliable and might cease at anytime, whereas enhanced biological phosphorus removal occurring in the system operating with either control strategy I or II during phase 2 of this work and in the Presence of feed PCP concentrations up to 1.0 mg/l was reliable. When, however, such processes were exposed to 5.0 mg/l PCP dose, enhanced phosphorus removal ceased and never returned.