• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10b
• /
• pp.1627-1632
• /
• 1991

A compact type LDPE autoclave reactor is analyzed with respect to the effects of the initiator feed concentration and the rate of heat transfer by employing the mixing-cell model with backflow. Singularity theory is applied for the single-cell model so that one can construct all the possible bifurcation diagrams. Since the single-cell model may not be adequate for the actual reactor, a two-cell model is also treated to predict the dynamic behavior of the reactor. As the rate of heat transfer increases, various multiplicity patterns and oscillatory motions are found. Apparently, the monomer conversion can be substantially increased with proper he-at removal and initiator supplement scheme. For this, however, the complex dynamic features accompanied must be taken into consideration in the reactor design.

• Journal of Mechanical Science and Technology
• /
• v.14 no.9
• /
• pp.1005-1012
• /
• 2000

Numerical optimization techniques combined with a three-dimensional thin-layer Navier-Stokes solver are presented to find an optimum shape of a stator blade in an axial compressor through calculations of single stage rotor-stator flow. Governing differential equations are discretized using an explicit finite difference method and solved by a multi-stage Runge-Kutta scheme. Baldwin-Lomax model is chosen to describe turbulence. A spatially-varying time-step and an implicit residual smoothing are used to accelerate convergence. A steady mixing approach is used to pass information between stator and rotor blades. For numerical optimization, searching direction is found by the steepest decent and conjugate direction methods, and the golden section method is used to determine optimum moving distance along the searching direction. The object of present optimization is to maximize efficiency. An optimum stacking line is found to design a custom-tailored 3-dimensional blade for maximum efficiency with the other parameters fixed.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.22-27
• /
• 2006

This paper describes the development of the stream-tube based dispersion model for modeling contaminant transport in open channels. The operator-splitting technique is employed to separate the 2D contaminant transport equation into the pure advection and pure dispersion equations. Then the total variation diminishing (TVD) schemes are combined with the second-order Lax-Wendroff and third-order QUICKEST explicit finite difference schemes respectively to solve the pure advection equation in order to prevent the occurrence of numerical oscillations. Due to various limiters owning different features, the numerical tests for 1D pure advection and 2D dispersion are conducted to evaluate the performance of different TVD schemes firstly, then the TVD schemes are applied to experimental data for simulating the 2D mixing in a straight trapezoidal channel to test the model capability. Both the numerical tests and model application show that the TVD schemes are very competent for solving the advection-dominated transport problems.

• Journal of the Korean Magnetic Resonance Society
• /
• v.12 no.2
• /
• pp.81-88
• /
• 2008

Solid HETCOR (Hetero-Correlation) requires homo-dipolar decoupling between proton spins during the evolution and the mixing period in 2D-NMR. There are two different ways of achieving it with pulse sequences. One is based on the multiple pulse (MP) sequence where thousands of intense radio frequency (rf) pulses are used to remove the homo-dipolar interaction between protons. The other is utilizing the so-called Lee-Goldburg (LG) off-resonance scheme where a continuous rf-irradiation is used. In this report, the advantage of one technique to the other, is analyzed. LG version is evaluated better in S/N and easier in setup procedure with the same experimental time.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2003.10a
• /
• pp.108-113
• /
• 2003

The numerical research has been done for the transverse jet behind a rearward- facing step in turbulent supersonic flow without chemical reaction. The purpose of transverse jet is used to improve mixing of the fuel in the combustor. Two- dimensional unsteady flowfields generated by slot injection into supersonic flow are numerically simulated by the integration of Navier-Stokes equation with two-equation k - $\varepsilon$ turbulence model. Numerical methods are used high-order upwind TVD scheme. Eight cases are computed, comprising slot momentum flux ratios and slot position at downstream of the step. The flow is very similar to the cavity flow, because the jet is like an obstacle. Therefore, the numerical results show the periodic phenomenon.

• Proceedings of the KSME Conference
• /
• 2000.11b
• /
• pp.485-490
• /
• 2000

This paper dipicts the computational results for the axisymmetric subsonic/sonic ejector systems with a second throat. The numerical simulations are based on a fully implicit finite volume scheme of the compressible Reynolds-Averaged Navier-Stokes equation in a domain that extends form the stagnation chamber to the ejector diffuser exit. In order to obtain practical design factors for subsonic/sonic ejector systems, the ejector throat area, the mixing section configuration, and the ejector throat length were changed in computations. For the subsonic/sonic ejector systems operating in the range of low operation pressure ratio, the effects of the design factors on the flow are discussed.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1997.10a
• /
• pp.430-435
• /
• 1997

This paper presents the material properties and production of 1400kg/$\textrm{cm}^2$ ultra high-strength concrete in consideration of the history of hydration temperature for the practical utilization. A series of laboratory tests were conducted to optimize the mix proportion and then the full-scall mock up tests were performed to investigate the practicability. The thermal sensors were installed prior to concrete casting into the walls and columns, to measure the hydration temperature during the hardening process, which is inevitable to select the most appropriate curing scheme.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.647-650
• /
• 2005

A new driving scheme, Address and Display Period Complex Driving for Expanding Gray Scale(ACE), is proposed by mixing Address Display period Separated(ADS) and Address While Display(AWD). In this method scan lines are divided in blocks driving by AWD and scan lines in block progress sequential high speed addressing. ADS driving get accomplished in low gray level for expanding gray scale. Scan time is reduced and the number of subfields is increased by high speed addressing of ACE. That expands the gray scale and decreases the dynamic false contour. Also, that improves contrast by using ramp reset.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2004.04a
• /
• pp.155-160
• /
• 2004

This paper presents a study on the permittivities of the carbon black/epoxy composite at microwave frequency. The measurements were performed at the frequency band of $1 GHz\~18GHz$. The results show that the complex permittivities of composites depend strongly on the natures and concentrations of the carbon black dispersion. The frequency spectrums of dielectric constants and ac conductivities of composites show the good conformities with descriptions of the percolation theory. The carbon black concentration dependencies do not have conformities with the descriptions of percolation theory and there is no peculiar concentration like percolation threshold, on that concentration, the conductivity of composite jumps up. A new scheme, that is a branch of Lichtenecker-Rother formula, is proposed to obtain a mixing law to describe the complex permittivities of the composites as function frequency and concentration of carbon black.

• ETRI Journal
• /
• v.37 no.4
• /
• pp.780-786
• /
• 2015

This paper describes an audio source separation that is based on nonnegative matrix factorization (NMF) and expectation maximization (EM). For stable and highperformance separation, an effective auxiliary source separation that extracts source residuals and reprojects them onto proper sources is proposed by taking into account an ambiguous region among sources and a source's refinement. Specifically, an additional NMF (model) is designed for the ambiguous region - whose elements are not easily represented by any existing or predefined NMFs of the sources. The residual signal can be extracted by inserting the aforementioned model into the NMF-EM-based audio separation. Then, it is refined by the weighted parameters of the separation and reprojected onto the separated sources. Experimental results demonstrate that the proposed scheme (outlined above) is more stable and outperforms existing algorithms by, on average, 4.4 dB in terms of the source distortion ratio.