• 한국해양학회지
• /
• 제30권4호
• /
• pp.288-301
• /
• 1995

적도 태평양 클라리온-클리퍼톤 균열대 사이의 한국심해 연구(KODOS)지역에서 채 취된 3개의 퇴적물 코아에 우라늄계열 비평형 기법을 적용하여 퇴적율과 입자교란율이 추정되었다. 과잉 토륨-230 방사능과 과잉 토륨-230/토륨-232 방사능비의 수직분포로 부터 추정된 퇴적율은 연구지역의 남동부 지역에서 천년 동안 수 밀리미터로 추정되었 으며, 북서부에서는 천년당 일 밀리미터 이하로 추정되었다. 퇴적물 시료의 방수에서 과잉 토륨-230 방사능과 과잉 토륨-230/토륨-232 방사능비가 일정한 수직분포를 보이 며 이는 저서생물등에 의한 입자 교란작용의 영향인 것으로 사료된다. 과잉 납-210의 수직농도 분포를 근거로 퇴적물 상부층과 하부층의 입자교란 속도를 추정하기 위하여 "2상자" 이류-확산 입자혼합 모델을 이용하였다. 입자혼합계수는 상부층에서는 수 10$cm^2$/y이며 하부층에서는 일 내지 수 $cm^2$/y로 추정되었다./y로 추정되었다.

• 펄프종이기술
• /
• 제46권3호
• /
• pp.28-36
• /
• 2014

The kind and the mixing ratio of recovered papers would affect the quality of final recycled paper. In this study, effects of the mixing ratio of various domestic recycled papers (old news print (ONP), old corrugated container (OCC) and coated paper (CP)) on variations in physical properties of paper and its productivity were investigated. When the mixing ratio of CP grade increased, the freeness (CSF) of recycled pulp was increased while paper strength and white water turbidity was decreased. Paper strength was decreased as the percentage of OCC was higher than ONP. When ONP was mixed with OCC, no adverse effect was observed except the increased drainage resistance. It is expected that these results could be utilized as fundamental data to establish regulations for the recovered paper grades according to mixing ratios of different kinds of them.

• 청정기술
• /
• 제28권4호
• /
• pp.278-284
• /
• 2022

본 연구는 1차원의 Carbon nanotube (CNT)와 2차원의 MXene을 최적의 비율로 배합한 우수한 전기전도성과 발열특성을 가진 저차원 복합소재 기반 면상발열체를 제안한다. CNT와 MXene을 친환경 소재인 Waterborne polyurethane (WPU)과 배합하되, MXene과 CNT의 중량비율을 3:1, 1:1, 1:3, 1:7, 1:14로 다르게 적용하고 WPU는 동일한 비율로 적용하였다. 그 결과, CNT 비율이 높을수록 면저항이 낮아지고 발열온도가 높아지는 것을 확인하였다. MXene과 CNT를 1:7, 1:14로 배합하는 경우 CNT-WPU 면상발열체보다 더 낮은 면저항과 높은 발열온도를 보여주었다. 이는 1차원 CNT와 2차원 MXene의 최적 배합으로 고밀도 네트워크가 형성되어 평평한 표면이 형성되기 때문이다. 위 우수한 전기적 특성을 가진 저차원 복합소재는 플렉서블 소자에 유용하게 활용될 것으로 기대된다.

• 한국분무공학회지
• /
• 제11권4호
• /
• pp.220-227
• /
• 2006

Experimental studies has been conducted to investigate the effect of orifice diameter ratio on the mixing characteristics of the split element of doublet and triplet elements. The spray characteristics of non-reacting immiscible liquids have been investigated using a patternator. The local volume fraction is measured by use of mean value of each component. This volume measurement represents the mixing characteristics of the liquid, which affect the overall combustion efficiency. The ratio of the orifice diameter, ranging from 1 to 1.5, and that of the jet-momentum, ranging from 0.5 to 6.0, we used. The jet impinging behavior with use of various ratios exhibits substantially different mixing characteristics. Mixing efficiency is maximized when the jet-momentum ratio is increased; this behavior is particularly prominent when the orifice diameter ratio is greater than unity. The split of the triplet element yields better mixing characteristics and is more effective than that of the doublet element in regard to achieving high combustion efficiency. The optimum mixing factor for the triplet element is found to be 0.75, according to our measurement.

• Journal of Advanced Marine Engineering and Technology
• /
• 제24권6호
• /
• pp.120-127
• /
• 2000

This study is concerned with evaluating the effects of acoustic excitation on the development of two stream mixing layer generated by split plate. The ratios of two velocities U1 and U2 either side of the splitter plate were such that $U_1/U_2$=1.0 (uniform flow) or $U_1/U_2$<1.0(shear flow). The mixing layers were disturbed acoustically through the edge of split plate. Quantitative data were obtained with hot-wire anemometry. Flow visualization with smoke-wire was also employed for qualitative study. the results show that the large scale structures of mixing layers are strongly affected by excitation frequency and amplitude in both uniform and shear flows. The maximum streamwise and vertical turbulent intensities of the excited flow fields are apt to be decreased as compared with those of without excitation. The flow characteristics of uniform flow are more influenced by acoustic excitation than those of shear flow.

• Journal of the korean society of oceanography
• /
• 제33권3호
• /
• pp.41-52
• /
• 1998

A seasonal circulation pattern in the eastern Yellow Sea (EYS) is suggested from the water mass analysis and geostrophic calculation using the hydrographic data collected by National Fisheries Research and Development Institute during the years of 1970 to 1990. This research focuses on the presence of inflow of warm (and saline) waters into EYS in summer. EYS is divided into two regions in this paper: the west coast of Korea (WCK) and the central Yellow Sea (CYS). In CYS, waters are linked with warm waters near Cheju Island in winter, but with cold waters from the north in summer (in the lower layer). It is not simple to say about WCK because of the influences of freshwater input and tidal mixing. Nevertheless, water mass analysis reveals that along WCK, waters have the major mixing ratios (40-60%) of warm waters in summer, while the dominant mixing ratios (50-90%) of cold waters in winter. Such a seasonal change of water mass distribution can be explained only by seasonal circulation. In winter, warm waters flow northward into CYS and cold waters flow southward along WCK. In summer, warm waters flow northward along WCK and cold waters flow southward into CYS. This circulation pattern is supported by both statistical analysis and dynamic depth topography. Accordingly, Yellow Sea Warm Current may be defined as the inflow of warm waters to CYS in winter and to WCK in summer.

• 오토저널
• /
• 제13권2호
• /
• pp.50-66
• /
• 1991

There are many factors which influence on the performance of a diesel engine. The piston bowl shape and swirl ratio are important factors to enhance the fuel-air mixing and flame propagation. In this study, calculations of the flow field in the cylinder of the diesel engine were carried out using the CONCHAS-SPRAY code for different bowl shapes and swirl ratios. In the case of constant swirl ratio, vortices which affect fuel-air mixing, evaporation and flame propagation are generated more strongly and consistently in the bowl-piston type combustion chamber than in the flat piston type. With this strong squish effect, injected fuel droplets are widely diffused and rapidly evaporated in the bowl-piston type combustion chamber. Especially a strong squish is developed and large and strong vortices are generated in the edge cutted bowl piston chamber. As the swirl ratio increases, it is found that a large and strong squish and vortices are generated in the combustion chamber and also fuel droplets are diffused into the entire combustion chamber.

• 한국식품조리과학회지
• /
• 제15권3호
• /
• pp.216-223
• /
• 1999

The purpose of this study is to find out the optimal mixing ratios of three different amounts of green tea powder, sugar and water for preparation of Sulgiduk through Response Surface Methodology based on the color, sensory, and texture test. The green tea powder levels were included 0.5∼1.0%, water levels were included 15∼25% and sugar levels were included 5∼15% per weight of rice powder. The optimal mixing ratios of a green tea powder, sugar and water for manufacturing the best quality of Sulgiduk were 1.0%, 12% and 22%, respectively.

• 약학회지
• /
• 제31권5호
• /
• pp.343-346
• /
• 1987

The effect of mixing ratios of active ingredient on the content uniformity of tablets was studied using caffeine as active ingredient and hydroxypropyl starch as diluent. In the case that caffeine content was not more than 1%, the standard deviation of individual tablet assays was inversely proportional to caffeine content. In the case of more than 1%, the standard deviation was constant independently of caffeine content. In the case that the designed tablet weight was not more than 200mg, the standard deviation of individual tablet assays was inversley proportional to tablet weight designed. In the case of more than 200mg, it was constant and the results for weight variation against the designed weight showed same tendency.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 추계학술대회 논문집
• /
• pp.286-289
• /
• 1997

It was studied that the effect of the mixing materials and the mole ratios on electrochemical properties of LiMn$_2$O$_4$LiMn$_2$O$_4$is prepared by reacting stoichiometric mixture of LiOH.$H_2O$ and MnO$_2$(EMD or CMD) and heating at 80$0^{\circ}C$ for 36h. We obtained properties of crystal structure through X-ray diffraction. LiMn$_2$O was reversible at 4.5V~3.0V and displayed two reduction and oxidation. Optimum synthesis results were obtained by reacting with LiOH.$H_2O$ and MnO$_2$(EMD) at mole ratio 1:2.