• Korean journal of food and cookery science
• /
• v.25 no.2
• /
• pp.260-265
• /
• 2009

The influence of mixing ratio of 25 commercial rice varieties was evaluated by DNA analysis and Toyo value palatability. No relationship was evident between rice palatability and various grain quality properties, or between palatability and mixing ratio. A positive relationship was evident between palatability and texture and between palatability and chalky rice ratio. A negative relationship was evident between mixing ratio and amylose content.

• Journal of Forest and Environmental Science
• /
• v.31 no.2
• /
• pp.119-125
• /
• 2015

This study examined the effects of rice straw steaming time and mixing ratio between rice straw and wood particle on the properties of mixed particle board from Acacia mangium Willd wood and rice straw. Rice straw and Acacia mangium Willd wood were collected in Hanoi, Vietnam. The particle board was three-layer particle board with the structural ratio of 1:3:1. The thickness, density and board size of the particle board were 18 mm, $0.7g/cm^3$, and $800{\times}800{\times}18$ (mm, including trimming), respectively. A resin mixture between commercial Urea-formaldehyde (U-F) adhesive and methylene diphenyl isocyanate (MDI) adhesive was used with a dosage of 12% for the core layer and 14% for the surface layer. In this experimental design, the steaming time for rice straw was 15, 30, 45, 60, and 75 minutes at $100^{\circ}C$. The rice straw-wood mixing ratio was 10, 20, 30, 40, and 50%. The results showed that both mixing ratio and steaming time affect the properties of the particleboard, but the mixing ratio has a stronger impact. A higher mixing ratio and a longer steaming time resulted in a better quality of particleboard. The optimal steaming time for rice straw was 46.12 minutes with the straw-wood mixing ratio of 29.85% with the following characteristics of the particle board: the modulus of rupture (MOR) of 14.64 MPa, internal bond strength (IB) of 0.382 MPa, thickness swelling (TS) of 8.83%, and board density of $0.7-0.7g/cm^3$.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.3 no.2
• /
• pp.17-23
• /
• 1996

Packaging trays were manufactured with recycled newspaper and rice straw to investigate the effect of mixing ratio of rice straw pulp on physical properties of the trays. The apparent density of the trays increased gradually with increasing mixing ratio of rice straw pulp and the bursting strength increased at the mixing ratio of above 40%. The results showed that the trays made from 100% rice straw pulp had the highest bursting strength and the trays with the mixing ratio of 20% and 100% had high compression strength. The air resistance of the trays decreased with increasing mixing ratio until 80%. As the mixing ratio of rice staw pulp in the trays increased, L value in color decreased and b value increased.

• Journal of Mushroom
• /
• v.15 no.1
• /
• pp.21-24
• /
• 2017

In this study, the effect of different substrates of agricultural by-products on the mycelial growth rate and density of Trametes versicolor (Turkeytail mushroom) was analyzed. We found that pepper stem and rice bran with a mixing ratio of 9:1(v/v) produced the best mycelial growth of 101 mm in 10 days, while a mixing ratio of 8:2 resulted in mycelial growth of 83 mm in 10 days. The control group treated with a 9:1 mixing ratio of oak sawdust and rice bran (v/v) produced mycelial growth of 74 mm in 10 days. The following results are in the order of beanstalk, sesame stem, and perilla stem. After the harvest of the mushrooms, the mycelial growth rate and the density of T. versicolor in each substrate were as follows the group with waste substrate of Pleurotus eryngii and rice bran with a mixing ratio of 9:1(v/v) produced the best result of 76 mm in days, while a mixing ratio of 8:2 produced of 61 mm in 10 days. The control group with a 9:1 ratio of oak sawdust and rice bran produced mycelia of 74 mm in 10 days, while a mixing ratio of 8:2 resulted in mycelia of 59 mm in10 days.

• Journal of Biosystems Engineering
• /
• v.28 no.5
• /
• pp.411-420
• /
• 2003

Physical and cultural properties were investigated on the rice-seed pellets made by the pelleting machine(Yu, 2003) as the changes with mixing ratios of soil to rice seed of 6 : 1, 7 : 1, and 8 : I, and rotating speeds of forming rolls of 7, 10, and 13 rpm. Average weight, average diameter, and average sphericity of the pellets were 1.70 g, 12.0 ㎜, and 99.1 ％, respectively. Average number of seeds per pellet was more than 3, and almost all pellets had more than 3 seeds in the cases of mixing ratios of 6 : 1, and 7 : 1 at the forming rolls' speed of 7 rpm. Gradual drying was needed because rapid drying caused cracks on surface of the pellets. Compression strength of the pellets dried in shady room was in the range of 132 ∼ 152 N, which was enough for handling. Comparing with the previous pellets(Park, 2002), average number of seeds per pellet, ratio of pellets including more than 3 seeds, and compression strength increased due to the effects of pressure feed of pellet materials, and improvements of the forming rolls. Emergence ratio of the pellets made at the mixing ratio of 6 : 1 and the forming rolls' speed of 7 rpm, was 100 % on dry paddy and was 97 % on flooded paddy surface. Good growth characteristics, and yield except number of seedling stand and ratio of missing plant were shown in planting of the pellets made at the mixing ratio of 7 : 1 and the forming rolls' speed of 7 rpm on flooded paddy surface field. Considering the cultural results, the mixing ratio of 6 : 1, and the forming rolls' speed of 7 rpm seems to be optimum operating condition for the improved pelleting machine.

• Korean journal of food and cookery science
• /
• v.30 no.2
• /
• pp.146-152
• /
• 2014

This study surveyed consumers' sensory liking ratings of 3 types of developed brown rice products (brown rice nut waffles, Kimchi and tuna rice ball, sweet red-bean paste rice ball) and analyzed the drivers for liking or disliking the brown rice products. Each brown rice product had a brown rice to brown rice powder ratio of either: 100:0; 80:20; or 50:50. Forty consumers evaluated the acceptance of brown rice products on a 9-point hedonic scale and gave comments regarding liking or disliking each product. The results of the preference investigation analysis showed subjectivity depending on the brown rice product and the respondents' genders and ages. For brown rice nut waffles was affected by gender, age, and brown rice powder mixing ratio (p < 0.05). The variables "liking the aroma"; "liking the delicate flavor"; "liking the chewiness"; "liking the moistness"; "liking the softness"; "liking the harmony"; "liking the aftertaste" and "overall acceptability" did not differ significantly with the Kimchi and tuna rice ball. For the sweet red-bean paste rice ball product, the rates of liking the chewiness, stickiness, moistness, and softness of the 0% brown rice powder mix were all higher (p < 0.05) than were the rates of liking those same qualities in the 50% brown rice powder mix. Among all brown rice products, there were high correlations between the overall acceptability, liking the saltiness, liking the aroma, and liking the harmony. A preference investigation analysis showed that the brown rice product fillings were key factors to the products' overall acceptability.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.32 no.4
• /
• pp.49-57
• /
• 2000

This study was carried out to investigate the effect of the type of base papers containing rice straw-BKP on the properties and printabilities of coated papers. Also, it was intended to evaluate the effect of coated paper prepared with anionic and amphoteric latex based coating color. The results obtained from this study were as follows. The fiber length of rice straw-BKP was observed much shorter than those of the wood pulps(Sw-BKP, Hw-BKP). This has effect on physical properties. Therefore, the results of measured physical properties were much lower than those of wood pulps. Also, physical properties tended to increase slightly with the increase of the mixing ratio of Sw-BKP. Opacity of the base paper containing rice straw-BKP, was higher than that of the wood pulps. As the mixing ratio of Sw-BKP increases the opacity tended to decrease. On the other hand, smoothness and roughness to rice straw-BKP were similar with Sw-BKP and its air permeability was lower than those of wood pulps. The optical properties of coated papers containing rice straw-BKP tended to be similar to those of other base papers. The ink receptivity of coated papers containg rice straw-BKP was higher than those of wood pulps and printing gloss was similar to wood pulps. The mixing ratio of Sw-BKP, the ink receptivity and printing gloss of rice straw-BKP were showed no difference irrespective the mixing ratio of Sw-BKP. Meannwhile, amphoteric latex improved the optical properties and printability of coated papers.

• Korean journal of food and cookery science
• /
• v.12 no.2
• /
• pp.146-152
• /
• 1996

Determining the optimal mixing ratio of pumpkin, water, glutinous rice powder, red bean, kidney bean in preparing Hobakjook has been attempted and on the basis of it, Hobakjook with glutinous rice powder was set to be A group, and the one that glutinous rice powder was replaced by brown glutinous rice powder for the purpose of enhancing preference and nutrition was set to be B group. A group and B group with additional 0％, 5％, 10％, 15% perilla powder of pumpkin weight was labeled as Al-A4 and Bl-B4 respectively, and then analyzed nutritionally. Optimal material mixing ratio and preference was investigated by use of sensory evluation and instrumental test. As a result, the optimal material mixing ratio was determined as pumpkin 400 g, water 60 cc, glutinous rice powder 40 g, red bean 30 g, kidney bean 30 g, salt 4 g, sugar 10 g. In sensory evaluation significant difference (P < 0.05) was shown among the samples in color., flavor.1, falvor. II and overall quality. And A3 in viscosity, A2 in color, A4 in sweetness, B2 in flavor 1, Al and B2 in flavor 11, and B2 in overall quality was preferred most. Instrumental measurement shows that B4 in viscosity and A4 in sweentness was highestly recorded and showed significant difference (p<0.05). As the addition of perilla powder increased, the viscosity and sweetness was increased. In color measurement A4 in L value, A3 in a value, and Bl in b value was highestly recorded. And as perilla powder was added, L value and a value was increased while b value was decreased. Color in sensory evaluation was significantly correlated to b value in instrumental measurement. In summary, Hobakjook with brown glutinous rice was superior to the one with glutinous rice in preference and proximate composition, and as the addition of perilla powder was increased, proximate composition was increased but preference was rather decreased, and Hobakiook with 5％ addition of perilla powder to brown glutinous rice powder was preferred most.

• Journal of Biosystems Engineering
• /
• v.27 no.5
• /
• pp.381-390
• /
• 2002

Direct seeding of rice-seed pellets is expected to be an alternative for solving problems in current direct seeding cultivation of rice. but mass production of rice-seed pellets is prerequisite for practical application. Design. construction and performance evaluation of an experimental rice seed pelleting machine were carried out for mass production of rice-seed pellets. The pelleting machine intended to make a ball type rice-seed pellet, which have 3∼5 rice seeds and diameter of which is 12 mm. Pellet materials ; rice seeds, soil, and binder were mixed and kneaded by the mixer. The designed rice seed pelleting machine fed pellet materials by screw conveyor to forming rolls and made rice-seed pellets. Capacity, ratio of perfect rice-seed pellets, seed and pellet material loss were investigated as mixing ratio of soil to rice seed and feeding rate of pellet materials. The pelleting machine showed up to 37,000 pellets/h of pelleting rate, 61∼71% of weight ratio of perfect rice-seed pellets to pellet materials supplied, 17∼48% of seed loss ratio. Average weight and average diameter of the pellets were 1.66 g and 12.0 mm. respectively. More than 3 rice seeds were included in most pellets at 6 : 1 of mixing ratio of soil to rice seed. And compression strength of the pellets was in the range of 88-130 N. To improve performance of the pelleting machine, improvements of the forming rolls, feeding mechanism, and discharging mechanism for reducing loss of pellet materials and seeds damage are needed.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.4
• /
• pp.420-427
• /
• 2014

The physical and mechanical properties of sawdust-rice husk mixed ceramic were investigated with rice husk mixing ratios. The mixed ceramic board was produced with carbonization and resin impregnated sawdust-rice husk board at high temperature. At the same percentage of resin impregnation condition, density and bending strength of the mixed ceramic board increased with increasing the mixing rates of rice husk, whereas weight loss of the ceramic boards decreased. At the same temperature condition for the carbonization of resin impregnated sawdust-rice husk board, the density and bending strength were the highest with 40% of rice husk mixing ratio.