• Journal of Bio-Environment Control
• /
• v.25 no.2
• /
• pp.100-105
• /
• 2016

In this study we investigated the suitability of horticultural main organic root substrate materials (peatmoss, coir) for the development proper root substrate for working with bulb onion transplanter. We investigated seedling sprout ratio, growth and characteristics (bulk density, root substrate cohesion) those are suitable for mechanical transplanting by mixing with inorganic materials(red clay etc.). Although both seedling growth and root substrate bulk density were similar in peatmoss and coir based root substrates, we found that peatmoss mixing had higher root substrate cohesion compared to coir mixing. We assume that higher cohesion properties of peatmoss based root substrate will give more weight of root part during mechanical transplanting of young onion seedlings in the field. Because of this, we suggest that peatmoss is the appropriate ingredient for developing root substrates for working with bulb onion transplanter.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.7
• /
• pp.947-950
• /
• 2001

To improve the low content of crude protein and low quality fermentation of napiergrass silage, ensiling with phasey bean was examined. Napiergrasses, (Pennisetum purpureum cv. Merkeron), hybrid napiergrass (Pennisetum purpureum${\times}$ Pennisetum typhoides) and phasey bean (Macroptilium lathyroides cv. Murray) were cultivated in Fukuoka, Japan. The first growth of napiergrasses and phasey bean were harvested at 90 days of age and chopped into about 1 cm lengths. The mixing levels of phasey bean with napiergrasses were 0, 25, 50 and 75; 700 g of plant materials were ensiled into a laboratory silo (1.0 litre. polyethylene container) and incubated for 30 days. After opening silos, pH, total nitrogen (TN), volatile basic nitrogen (VBN) and organic acids (lactic acid: LA, acetic acid: AA, butyric acid: BA) were determined. The experiment was a factorial design of $2{\times}4$ with 3 replicates. The data were analyzed statistically by two-way analysis of variance. Without inclusion of phasey bean, lower quality was observed for hybrid silage than for Merkeron silage. The inclusion of phasey bean at the rate of 25% increased DM and TN, and decreased pH value, VBN/TN, AA and BA in both Merkeron and hybrid napiergrass silages. The value of pH, TN, VBN/TN, AA and BA were not significantly different among 25, 50 and 75% mixing levels of phasey bean. LA production increased significantly with the increase in phasey bean mixing level in both hybrid and Merkeron silages. At all mixing levels of phasey bean, LA production did not show significant differences between Merkeron and hybrid silages.

• The Journal of Advanced Prosthodontics
• /
• v.7 no.5
• /
• pp.400-405
• /
• 2015

PURPOSE. The purpose of this study is to mix dental ceramic powder in varying ratios and evaluate the effect of the mixing ratio on color and translucency. MATERIALS AND METHODS. The ceramic powder of shade A3 of the same product was mixed with the shade A2 of three products: IPS e.max Ceram (Ivoclar Vivadent, Schaan, Liechtenstein), Vintage Halo (SHOFU Inc., Kyoto, Japan), and Ceramco 3 (Ceramco-Dentsply, Burlington, NJ, USA) in the following fixed ratios (0 wt%, 25 wt%, 50 wt%, 75 wt%, and 100 wt%) and then fired. A total of 150 specimen of ceramic fired were manufactured in a regular size (W: 8.5 mm, L: 10.5 mm, and H: 1.5 mm). For color and translucency, $L^*$, $a^*$, and $b^*$ were measured and Two-way analysis of variance (ANOVA) and One-way analysis of variance (ANOVA) were used for data analysis (${\alpha}$=0.05). RESULTS. The higher the mixing ratio was, $L^*$, $a^*$, and $b^*$ of IPS e.max Ceram were all increased, and $L^*$ of Vintage Halo was reduced and $a^*$ and $b^*$ were increased. $L^*$ and $a^*$ of Ceramco3 were reduced and $b^*$ of Ceramco3 was increased. Color difference (${\Delta}E^*ab$) was increased in all three products as the mixing ratio got higher. Increased mixing ratios resulted in decreased translucency parameter (TP) values for IPS e.max Ceram but increased TP values for Vintage Halo and Ceramco3. CONCLUSION. In this limited study, CIE $L^*$, $a^*$, and $b^*$ were influenced by the mixing ratio of the A3 powders and porcelain powder mixtures represented a various color and translucency.

• Restorative Dentistry and Endodontics
• /
• v.19 no.2
• /
• pp.409-428
• /
• 1994

Endodontic surgery is performed when conventional endodontic therapy fails or is contraindicated. In such cases, retrograde filling materials including amalgam, composite resin, and various cements have been used. Biocompatibilty and margin sealing ability of retrograde filling materials are important for the long term success of endodontic surgery. In vitro cell culture is frequently used as the method of measuring the biocompatibilty of dental materials. The purpose of this study was to evaluate the cytotoxicity of six kinds of retrograde filling materials including newly developed light curing glass ionomer cements. Each material was mixed according to. the manufacture's instruction and evaluated as : freshly mixed, 24-hour after mixing, and 168-hour after mixing respectively. The elution solution was extracted after 24-hour contact with materials using media. Cytotoxicity was evaluated by direct contact, or elution contact. Test results of radiochromium($^{51}Cr$) release, cell viability using tetrazolium dye (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl dimethyltetrazolium bromide(MTT) test and lactate dehydrogenase(LD) of damaged L929 cells were analyzed. In the $^{51}Cr$ release of direct contact, all experimental retrograde filling materials except amalgam and glass ionomer cement showed increased cytotoxicity compared to control. In the $^{51}Cr$ release of elution solution, the released $^{51}Cr$ was so minimal that it was impossible. to evlauate the cytotoxicity exactly. The elution solutions of glass ionomer cement and IRM showed marked cytotoxicity in MTT test. LD enzyme activity was highest in tests of direct contact with composite, light curing composite, and light curing glass ionomer cement and IRM. Amalgam revealed least cytotoxicity while IRM showed cytotoxicity using all three methods. Composite, light curing composite and light curing glass iomomer cement were cytotoxic in the tests of $^{51}Cr$ release and LD activity. Glass ionomer cement showed cytotoxic effect only in the MTT method. From these results it is suggested that the standardization and optimization of cytotoxicity testing, especially using elution solutions, should be strongly advised.

• Journal of the Korean Ceramic Society
• /
• v.49 no.6
• /
• pp.648-653
• /
• 2012

Hybridization of dense ceramic membranes for hydrogen separation with an electronically conductive metallic phase is normally utilized to enhance the hydrogen permeation flux and thereby to increase the production efficiency of hydrogen. In this study, we developed a nickel and proton conducting oxide ($BaCe_{0.9}Y_{0.1}O_{3-{\delta}}$: BCY) based cermet (ceramic-metal composites) membrane. Focused on the general criteria in that the hydrogen permeation properties of a cermet membrane depend on its microstructural features, such as the grain size and the homogeneity of the mix, we tried to optimize the microstructure of Ni-BCY cermets by controlling the fabrication condition. The Ni-BCY composite powder was synthesized via a solid-state reaction using $2NiCO_3{\cdot}3Ni(OH)_2{\cdot}4H_2O$, $BaCeO_3$, $CeO_2$ and $Y_2O_3$ as a starting material. To optimize the mixing scale and homogeneity of the composite powder, we employed a high-energy milling process. With this high-energy milled composite powder, we could fabricate a fine-grained dense membrane with an excellent level of mixing homogeneity. This controlled Ni-BCY cermet membrane showed higher hydrogen permeability compared to uncontrolled Ni-BCY cermets created with a conventionally ball-milled composite powder.

• Korean Journal of Materials Research
• /
• v.12 no.2
• /
• pp.146-152
• /
• 2002

Effect of polyaniline and additives on surface appearance of Zn electrodeposition was investigated by SEM and XRD analyzing. We carried out the experiment from sulfate Zinc bath containing sulfonated polyaniline, gelatin and thiourea by EG(Electrogalvanizing) simulator. Addition of polyaniline and gelatin in bath, crystal size and shape of hexagonal plane of Zn crystal reduced. Mixing of thiourea, however, brittle deposits were observed because of the difference between vertical growth and parallel growth. (1011) peak appeared with polyaniline and gelatin in XRD analysis. In case of mixing of polyaniline, gelatin and thiourea, (1011) peak appeared and intensity of Zn basal plane decreased. These results suggested that overpotential increased with addition of polyaniline and additives In bath.

• Journal of Powder Materials
• /
• v.21 no.4
• /
• pp.286-293
• /
• 2014

The electrochemical properties of cells assembled with the $LiNiO_2$ (LNO) recycled from cathode materials of waste lithium secondary batteries ($Li[Ni,Co,Mn]O_2$), were evaluated in this study. The leaching, neutralization and solvent extraction process were applied to produce high-purity $NiSO_4$ solution from waste lithium secondary batteries. High-purity NiO powder was then fabricated by the heat-treatment and mixing of the $NiSO_4$ solution and $H_2C_2O_4$. Finally, $LiNiO_2$ as a cathode material for lithium ion secondary batteries was synthesized by heat treatment and mixing of the NiO and $Li_2CO_3$ powders. We assembled the cells using the $LiNiO_2$ powders and evaluated the electrochemical properties. Subsequently, we evaluated the recycling possibility of the cathode materials for waste lithium secondary battery using the processes applied in this work.

• Journal of Apiculture
• /
• v.32 no.4
• /
• pp.391-394
• /
• 2017

Propolis is made by bees collecting protective material or essence of plants and mixing with saliva and enzymes produced by the salivary glands. It is used to repair the inside of the honeycomb, keep it sterile, and adjust the temperature and humidity. Propolis is a natural antibiotic substance that it is used to make a clean room by coating the cell before the queen bee lay eggs, and preventing the bacteria from invading by using with wax when sealing the nursery room. Propolis extract is a health functional food with antioxidant and oral antimicrobial effects. In order to use propolis in food, its active ingredients are extracted with ethanol. Water-soluble propolis was prepared by mixing and stirring honey and ethanol extracted propolis (EEP) solution. When 1kg of honey and 100ml of ethanol extracted propolis solution were mixed and stirred, the total flavonoid content of water-soluble propolis was $6.6{\pm}1.1mg/10g$, and the free radical scavenging effects of water-soluble propolis were 54 to 74%.

• Journal of Powder Materials
• /
• v.25 no.2
• /
• pp.158-164
• /
• 2018

Multi-walled carbon nanotube (MWCNT)-copper (Cu) composites are successfully fabricated by a combination of a binder-free wet mixing and spark plasma sintering (SPS) process. The SPS is performed under various conditions to investigate optimized processing conditions for minimizing the structural defects of CNTs and densifying the MWCNT-Cu composites. The electrical conductivities of MWCNT-Cu composites are slightly increased for compositions containing up to 1 vol.% CNT and remain above the value for sintered Cu up to 2 vol.% CNT. Uniformly dispersed CNTs in the Cu matrix with clean interfaces between the treated MWCNT and Cu leading to effective electrical transfer from the treated MWCNT to the Cu is believed to be the origin of the improved electrical conductivity of the treated MWCNT-Cu composites. The results indicate the possibility of exploiting CNTs as a contributing reinforcement phase for improving the electrical conductivity and mechanical properties in the Cu matrix composites.

• Journal of Powder Materials
• /
• v.19 no.5
• /
• pp.373-378
• /
• 2012

Sintered bulks of $ZrO_2$ nanopowders were fabricated by magnetic pulsed compaction (MPC) and subsequent two-step sintering employed in this study and the formability effects of nanopowder on mixing condition, pressure and sintering temperature were investigated. The addition of PVA induced and increase in the formability of the sintered bulk. But cracked bulks were obtained on sintering with addition of over 10 wt% PVA due to generation of crack during sintering. The optimum compaction pressure during MPC was 1.0 GPa and mixing conditions included using 5.0 wt% PVA. The optimum processing condition included MPC process, followed by two-step sintering (first at 1000 and then at $1450^{\circ}C$). The sintered bulks with the diameter of 30 mm under these conditions were found to have non crack, ~99% density.