• Journal of Biosystems Engineering
• /
• 제20권1호
• /
• pp.73-86
• /
• 1995

The automatic control system in the greenhouse have to be developed to the direction of considering various factors the variables such as condition of the cultivation and greenhouse, the properties and types of products. Therefore, it is more important to set up variables appropriately than the problems of automatic control system itself, and the automatic control system which satisfy these problems should be simplified in the aspect of operation. In addition, even the individual automations are not perfect yet, so more studies are required for the development of comprehensive automatic system in korea. This study was carried out to automatize environment control systems for greenhouse, especially from most intensive labor requiring parts such as watering, irrigating liquefied fertilizer, spraying chemicals, mixing and ventilation system, etc. The results are summarized as follows. 1. Control type tensiometer was expected to be desirable in the automation of watering system, therefore, a new tensiometer was designed and developed through this study. 2. The chemical spraying system developed through this study was found to be excellent in the aspect of operation. 3. When pulse type water discharge meter was used in the mixing of liquefied fertilizer and chemical solution, the error of mixing were range $\pm$0.1~0.15%. 4. The water level switch of electrod type used for controlling water level was found to be affective in both control performance and operation cost. 5. The water and level control system can be omitted if each tank size are standardized in accordance with greenhouse size, therefore, the installation cost might be significantly reduced. 6. The developed general controller was excellent in hardware parts, but still remained to be improved in software parts.

• 중소기업융합학회논문지
• /
• 제6권4호
• /
• pp.99-106
• /
• 2016

본 논문에서는 White 색상을 달성하기 위한 R, G, B 혼합비율 Type을 기반으로 상대적으로 열화된 BER성능을 달성하는 파장 대역에 Forward Error Correction (FEC) 기법을 적용하여, 전체 시스템의 BER성능을 향상 시킬 수 있는 가시광 통신 시스템을 제안한다. FEC기법으로 Low Density Parity Check (LDPC) 코드를 적용하였으며, LDPC 부호는 Shannon의 한계치에 가장 근접하는 오류정정 부호로 평가되고 있으며, 오류마루(error floor) 현상이 나타나지 않고, 완전 병렬처리가 가능하여 고속 복호가 가능한 장점을 가지고 있다. 이와 같은 시스템에서 LDPC채널 코딩을 각 파장 대역에 부분적으로 적용함으로써, 주파수 효율 감소 및 데이터 전송률 감소를 완화 할 수 있다.

• Journal of Mechanical Science and Technology
• /
• 제17권9호
• /
• pp.1380-1387
• /
• 2003

When a cold HPSI (High pressure Safety Injection) fluid associated with an overcooling transient, such as SGTR (Steam Generator Tube Rupture), MSLB (Main Steam Line Break) etc., enters the cold legs of a stagnated primary coolant loop, thermal stratification phenomena will arise due to incomplete mixing. If the stratified flow enters the downcomer of the reactor pressure vessel, severe thermal stresses are created in a radiation embrittled vessel wall by local overcooling. As general thermal-hydraulic system analysis codes cannot properly predict the thermal stratification phenomena, RG 1.154 requires that a detailed thermal-mixing analysis of PTS (pressurized Thermal Shock) evaluation be performed. Also. previous PTS studies have assumed that the thermal stratification phenomena generated in the stagnated loop side of a partially stagnated primary coolant loop are neutralized in the vessel downcomer by the strong flow from the unstagnated loop. On the basis of these reasons, this paper focuses on the development of a 3-dimensional thermal-mixing analysis model using PHOENICS code which can be applied to both partial and total loop stagnated cases. In addition, this paper verifies the fact that, for partial loop stagnated cases, the cold plume generated in the vessel downcomer due to the thermal stratification phenomena of the stagnated loop is almost neutralized by the strong flow of the unstagnated loop but is not fully eliminated.

• 대한기계학회논문집B
• /
• 제40권1호
• /
• pp.47-53
• /
• 2016

격자 볼츠만법을 이용하여 리튬이온전지의 전극 내 발생하는 전해액 함침 현상에 관하여 연구하였다. 최근 리튬이온전지는 용량 증가 및 에너지밀도 향상을 위하여 전극 설계시 활물질에 미세입자를 혼합하고 있어, 이로 인하여 전해액 함침성에 영향을 미치게 될 수 있다. 본 연구에서는 활물질 혼합율에 따른 전해액 분포와 포화도 변화를 알아보았다. 활물질 혼합비의 변화는 전극 내 전해액 함침 메커니즘에 영향을 주어, 전해액 함침속도와 함침도가 변화함을 확인하였다.

• 대한기계학회논문집B
• /
• 제27권3호
• /
• pp.326-333
• /
• 2003

In the measurement using DMA and CPC in series, there is some time delay for particles classified in DMA to detect in CPC. During this time, the DMA time-response changes due to the velocity profile of sampling tube and the diffusion of particles in the volume that exists between the DMA exit and the detector of ultra-fine CPC. This is called mixing effect. In the accelerated measurement methods like the TSI -SMPS, the size distribution is obtained from the correlation between the time-varying electrical potential of the DMA and the corresponding particle concentrations sampled in DMA. If the DMA time -response changes during this delay time, this can cause the error of a size distribution measured by this accelerated technique. The kernel function considering this mixing effect using the residence time distribution is proposed by Russell et al. In this study, we obtained a size distribution using this kernel to compare to the result obtained by the commercial accelerated measurement system, TSI -SMPS for verification and considered the errors that result from the mixing effect with the geometric mean diameters of originally sampled particles, using virtually calculated responses obtained with this kernel as input data.

• 한국유기농업학회지
• /
• 제11권4호
• /
• pp.93-102
• /
• 2003

This research was made to determine the optimum mixing ratio cattle manure and food waste investigating the effect that gets the growth and reproductive efficiency of earthworm and productivity of earthworm casts at processing process when handled cattle manure and food waste by vermicomposting, in order to establish the treatment system of organic wastes by vermicomposting. Survival ratio of earthworm was highest in the mixing ratio 80~100% : 20~0% of cattle manure and food Waste, and the increasing ratio was highest in cattle manure 100%, and the number of young worms, the weight of young worms and the productivity of earthworm casts in plots more than the mixing ratio 60% of cattle manure were significantly higher than in the other treatment plots(p<0.05). Total nitrogen and carbon contents in earthworm cast were decreased when rearing time of earthworm was increased. Carbon and nitrogen rate(C/N) of earthworm cast in plots more than the mixing ratio 80% of cattle manure was significantly higher than in the other treatment plots(p<0.05). pH in earthworm cast was higher than that in residual matter. The contents of electrolytic conductivity in the higher mixing ratio of food waste were significantly higher than those in the other treatment plots(p<0.05).

• 한국항공우주학회지
• /
• 제34권8호
• /
• pp.63-70
• /
• 2006

초소형 비행체는 초소형, 초경량이기 때문에 매우 작고 가벼운 MEMS형 센서만이 초소형 비행체 자동 비행 장치에 적용될 수 있다. 본 논문에서는 이러한 MEMS 형 관성센서의 항법 성능을 향상시키기 위해 가속도계와 자이로를 혼합하는 알고리즘으로 자세 비교 보상을 이용한 혼합 방법을 제시하고 기존의 퍼지 추정을 이용한 혼합 방법과 시뮬레이션을 통해 성능을 비교한다. 이를 통하여 자세 비교 보상 방법을 이용한 혼합 방법이 기존의 퍼지를 기반으로 하는 혼합 방법보다 초소형 비행체 자세 추정에 보다 더 우수한 성능을 가짐을 보인다.

• 한국정보통신학회논문지
• /
• 제13권10호
• /
• pp.2189-2196
• /
• 2009

광파이버 네트웍에서 광전믹싱 광검파의 가용 주파수대역 확장을 위한 이론을 제시하고 시뮬레이션을 실시하였다. 광전믹싱 광검파의 정규화 이득을 정의하고, 검파소자의 차단주파수를 초월하는 고주파 영역의 신호도 검파가 가능함을 확인하였다. 포토다이오드 내부의 캐리어 천이에 대한 연속방정식을 풀어서 광전믹싱 현상의 메카니즘을 해석하였다. 정규화 이득은 신호주파수와 차주파수의 크기에 의존하였으나, 포토다이오드에 흐르는 광전류의 크기는 신호주파수와는 무관하였다. 신호 검파효율의 최대화를 위해서는 바이어스 전압과 국부신호의 진폭을 동시에 최적화할 필요가 있다.

• 한국유기농업학회지
• /
• 제31권4호
• /
• pp.309-325
• /
• 2023

GMO labeling system in South Korea stipulates three labeling methods: GMO labeling, no labeling and Non-GMO labeling. Products labeled as Non-GMO are not allowed for unintentional commingling of GMO without tolerance. However, consumers vary their acceptance of Non-GMO label on the unintentionally commingled products and willingness to pay according to the mixing rate, rather than devalue the whole products as useless. Additionally, consumers do not believe that the acceptable mixing rate should be discriminated between non-labeled products, which allow up to 3% of unintentional GMO contamination, and Non-GMO labeled products. Information on unintentional GMO mixing mainly refers to the mixing rate, but the Non-GMO content remaining even after commingling is also important information. The decline in value is alleviated when consumers are exposed to positive information, such as Non-GMO content, rather than when exposed to negative information, such as the mixing rate. Loss Aversion Coefficient is relative depending on whether the information representing the loss is positive or negative. Information that a Non-GMO labeled product contains X% GMO is more sensitive than information that (100-X)% Non-GMO remains.

• Nuclear Engineering and Technology
• /
• 제37권5호
• /
• pp.469-478
• /
• 2005

The subchannel analysis capability of MARS, a multi-dimensional thermal-hydraulic system code, has been enhanced. In particular, the turbulent mixing and void drift models for the flow-mixing phenomena in rod bundles were improved. Then, the subchannel analysis feature was combined with the existing coupled system thermal-hydraulics (T/H) and 3D reactor kinetics calculation capability of MARS. These features allow for more realistic simulations of both the hot channel behavior and the global system T/H behavior. Using the coupled features of MARS, a coupled analysis of a main steam line break (MSLB) is carried out for demonstration purposes. The results of the calculations are very reasonable and promising.