• Journal of Aerospace System Engineering
• /
• v.9 no.2
• /
• pp.34-40
• /
• 2015

Staged combustion cycle engines are well known to have high combustion efficiencies and specific impulse. In this study, design of mixing head part of combustion chamber for 8tonf class staged combustion cycle rocket engine (ES-08) was performed. Structural stability of the mixing head part of the combustion chamber is very important design factor because it is loaded by high temperature and high pressure of fuel and oxidizer as well as by thrust load simultaneously. Uniformity of flow distributions of the propellants to the injectors is also important factor. First, a basic configuration for the ES-08 mixing head part was designed on the basis of the structural design requirements. And then, the structural analyses were performed on the basic configuration as well as some of reinforced configurations. As the structural analyses results, the most stable configuration was selected for the ES-08 mixing head part. In order to examine the uniformity of the flow distributions of the propellants through the manifold of the mixing head, flow analysis was performed based on the selected configuration. The results of the flow analysis showed that the fuel and the oxidizer were uniformly supplied to the injector.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.5
• /
• pp.157-165
• /
• 2017

The high-pressure resin transfer molding (HP-RTM) technology has been commercialized for fast production of fiber reinforced composite materials. The high-pressure mixing head was one of the most core component of the HP-RTM process. In this study, a mixing head was systematically designed, manufactured and evaluated. This mixing head was composed of a nozzle, a mixing chamber, a cleaning piston part, and an internal mold release part. In actual, a straight-type structure was newly designed instead of the conventional L-type structure for improving the maximum mixing pressure and mixing ratio precision. The performance of mixing head was showed maximum mixing pressure of 15.22MPa and mixing ratio precision of 0.12%. CFRP molding experiments were successfully obtained a 6~11 laminating carbon sheet using HP-RTM presses and specimen molds.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.26 no.3
• /
• pp.54-65
• /
• 2022

We are developing a compact ignition device that can provide a multi-ignition capability for an upper stage methane engine of a two staged small satellite launch vehicle. Firstly, the multi-ignition device is designed and built as an integral part of an additively manufactured mixing head. Secondly, the ignition device requires no separate high-pressure vessels to store ignition propellants as they are branched out from the main feed lines for the mixing head. We performed experiments at various levels, including igniter autonomous tests, thrust chamber ignition and combustion tests on the new compact ignition device which is integrated in the thrust chamber of one-tonf class liquid oxygen/liquid methane engine, and confirmed stable ignition performance.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.11a
• /
• pp.608-612
• /
• 2009

Technology demonstration models(TDM) of a 75-$ton_f$ liquid rocket engine(LRE) thrust chamber were manufactured on the basis of development technologies of 30-$ton_f$ LRE. It was confirmed that some machining and welding technologies which were aimed to be verified through the manufacturing of demonstration models could be applied to the thrust chamber 75-$ton_f$-class. New designed mixing head part was manufactured by means of new process. The manufacturing process and technologies established through TDM's will improve the reliability of manufacturing process of large LRE thrust chamber.

• Journal of Biosystems Engineering
• /
• v.35 no.2
• /
• pp.91-99
• /
• 2010

A Model of small scale total mixed rations(TMR) plant which can be utilized round bales was developed, tested and analyzed in this study. This study consist of two parts. One is development of a small scale TMR plant model which was already reported at the previous paper. This is the second part of the study. For the study, a series of tests of the model plant were performed and its costs was analyzed. Also, the break-even point of the model plant by comparing with market price of commercial TMR feed was determined. Results of the research are summarized as follows ; As the results of mixing test, the average coefficient of variation(CV) value for mixing of the feed was 13.0 % at the gate of the mixer. The production cost was estimated as 8,298 won/head for dairy cattle farm and 2,495 won/head for beef cattle farm, when producing 8 batch a day. Also, it is recommended to utilize the model plant when farm size is over 79 heads for dairy cattle farm and 113 heads for beef cattle farm. As an overall conclusion, the model plant designed for farm size TMR feed mill will be very useful model for both beef cattle and dairy farms in Korea. Also it is expected that the capital investment for the model plant can be recovered with 8 months compare with purchasing commercial TMR feed if the model plant feeds 1,000 beef cattle approximately.

• The Research Journal of the Costume Culture
• /
• v.13 no.4 s.57
• /
• pp.622-631
• /
• 2005

The purpose of this study is to know variety winding ways for scarf and to know the trends of scarf expression methods with seeing how to affect these ways on recent fashion. Investigating for scarf's concept and feature through theory records and looking for variety scarf expression ways were done for this study. And then The photo data of fashion magazines from s/s 2000 to s/s 2005, focusing on the divided scarf expressions, were analyzed. The frequencies of scarf expression are like this; decorating on the neck($60\%$), decoration on the shoulders($18\%$), decorating on the head($10\%$), etc($9\%$), using for accessaries($3\%$). Decorating on the necks is shown lasting ways. Also recently the methods breaking the established concepts - the mixing with two ways and the pratical using scarf' as a part of clothes - have a tendency to increase steady.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.8
• /
• pp.659-663
• /
• 2014

Manufacturing processes of industrial tire are composed of mixing, extrusion, curing, trimming and inspecting. Among them curing is the most important process in the production of industrial tire. In this study the newly developed spring vent system was designed in order to solve rubber intrusion problem inside spring vent system in the curing process. After the experiment it is concluded that rubber intrusion was caused by angled stem head part. New spring vent system was manufactured and new design of spring vent system is proper to use for industrial tire curing process.

• Journal of Conservation Science
• /
• v.18 s.18
• /
• pp.63-74
• /
• 2006

All rock materials of the three storied stone pagoda in Seoakri were composed of light gray alkali granite with medium grained and developed with small mialolitic cavities. This stone pagoda is preserving almost archetype except the head part because there was repair work already. But, foundation, basement and roof rocks are serious state by microbial invasion such as lichens. Because there are tree and grass that cause direct effect to stone pagoda surrounding. Therefore, conservation treatment executed the primary dry cleaning and secondary wet cleaning treatment. Stone surface is partly not removed well such as lichens which part removed using cleansing device that use high temperature steam. Some treated part concrete and epoxy resin remove and retreatment with mixing talc and alkali granite powder to epoxy resin. Did color matching at mixing process of epoxy resin and fillers to properties with set the feel of a material. Also, drainage ditched to minimize inflow of rainwater fall from slope that is on the east of stone pagoda, tree and grass in stone pagoda surrounding wished to do remove and control occurrence of lichens hereafter minimizing moisture conteats.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.40 no.4
• /
• pp.746-762
• /
• 2016

This study considers expression techniques and aesthetic values in the images of head dress reflected in a natural motif. The conclusions of the study are as follows. The first type is the realistic expression (52.4%) such as the reproduction of a natural object's essential form (27.0%), the partial derivation of the natural object (19.3%), and the planarization for the actual image of the natural object (6.1%). The second type is a metaphorical expression (39.0%) which emphasizes the morphological characteristics of nature (18.2%), the structuration of the natural object's silhouette into a three-dimensional or two-dimensional form (11.5%), and the abstract expression of the form in the natural object (9.3%). The third type is a hybrid expression (8.6%) that is a compromise between practical (or metaphorical expressions) so that expression techniques represent a compromise between the natural object's essential form and abstract expression (4.6%) or the combination of the natural object's silhouette into a three-dimensional or a two-dimensional visualization (4.0%). Aesthetic head dress values reflected in the natural motif first indicate a primitive value. This state of natural instinct recreates the natural object or combines part of the biological elements of the natural object to create an inducement to escape from the practical world. The second is amusement in the expression of animals in dynamic and humorous forms creates an illusion of animals being alive with a representative playful enjoyment. The third is abstraction that grant freedom in the observer's aesthetic rational through a reinterpretation of the fashion designer. The fourth is eclecticism where a compromise represents an act of mixing a variety of independent factors to create harmony with the imagery of nature created through the grafting of diverse expression techniques that break away from stereotypes of existing natural objects to create a type of nature that cultivates new values.

• Ocean and Polar Research
• /
• v.25 no.4
• /
• pp.447-457
• /
• 2003

In order to understand the distribution of changes of geochemical characteristics in surface sediments according to various environmental changes around the artificial Lake Shihwa, surface sediments were sampled at $13{\sim}15$ sites form 1997 to 1999 and analyzed by C/S analyzer, ICP/MS and AAS. The average $S/C_{org}$ ratio was 0.35 in the surface sediments, which is similar to 0.36, the characteristic ratio of marine sediments. Heavy metal contents and enrichment factors in the surface sediments tended to be decreasing from the head to the mouth of the Lake Shihwa. With the deposition of fine-grained sediments in the central part of lake, anoxic water column induced the sulfides compounds with Cu, Cd and Zn. Metals such as Al, Fe, Cr, Co, Ni, Cu, Zn and Cd except for Mn and Pb showed relatively high correlation coefficients among them. The contents of Cr, Co, Ni, Cu, Zn and Cd in the surface sediments of the lake were two to five times higher than those in the lake before dike construction and also in outer part of the dike. These are mainly due to the Input of untreated industrial and municipal waste-waters into the lake, and the accumulation of heavy metals by limitation of physical mixing. Although metal contents of the surface sediments at the sites near the water-gate due to outer seawater inflow tended to be lower than those during the desalination, heavy metals were deposited in areas around the new industrial complex in the evidence of spatial distribution of heavy metals in the sediments. This is mainly due to the input of untreated waste-waters from tributaries.