• Journal of the Korean Institute of Educational Facilities
• /
• v.6 no.2
• /
• pp.86-93
• /
• 1999

• Journal of the Korean Institute of Educational Facilities
• /
• v.6 no.2
• /
• pp.94-101
• /
• 1999

• 대한생식의학회:학술대회논문집
• /
• 2006.06a
• /
• pp.54-57
• /
• 2006

• Journal of the korean Society of Automotive Engineers
• /
• v.3 no.2
• /
• pp.18-26
• /
• 1981

The purpose of this paper is to study the possibility of practical use of gasoline-methanol mixed fuel as an alternative fuel of gasoline engines in the light of engine performances and harmful exhaust emissions as well as mixings and separations of the mixed fuels. When the methanol of 99.8% purity is mixed with super or regular gasoline available on the market today, the experimental results obtained without modifying carburetor in this study are as follows; 1.The separation ratio depends upon the gasoline-methanol mixing ratio only, regardless of fuel temperature and fuel additives for preventing separation of phase. 2.The critical absorption ratio is affected by the gasoline-methanol mixing ratio, its temperature and the quantity of fuel additives. 3.Concerning the distillation temperature, the initial point of all sorts of fuels is almost same,but 10% point and 35-60% point of mixed fuels are lower than those of gasoline only. 4.In case of throttle valve opening set, engine output using the mixed fuels is decreased compared to gasoline, but thermal efficiency is increased as a consequence of decreasing specific energy consumption. 5.In case of fixed load test, thermal efficiency is increased at low engine speed even under low part-load as well as under comparatively high part-load including full load. 6.CO and NOx emissions are reduced remarkably with the mixed fuels.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.9
• /
• pp.131-139
• /
• 2001

The use of fracture mechanics has traditionally concentrated on crack growth under an opening mechanism. However, many service failure occur from cracks subjected to mixed mode loadings. Hence, it is necessary to evaluate the fatigue behavior under mixed mode loading. Under mixed mode loading conditions, not only the fatigue crack propagation rate is of importance, but also the crack propagation direction. The mode I and II stress intensity factors of CTS specimen were calculated using elastic finite element method. The propagation behavior of the fatigue crack of the STS304 steeds under mixed mode loading condition was evacuated by using stress intensity factors $K_I$ and $K_II. The MTS criterion and effective stress intensity factor were applied to predict the crack propagation direction and the fatigue crack propagation rate.

• Journal of Animal Environmental Science
• /
• v.5 no.1
• /
• pp.63-72
• /
• 1999

This study was carried out to improve utilization of fly ash. Each animal waste was mixed with fly ash and composted This compost used at forage crops with corn, rye and alfalfa to examine to examine the fertilized efficiency and investigated productivity of forage crops, composition of this copmost and effect of fly ash on soil characteristics and composition. Content of organic matte, P2O5, K2O, CaO, MgO, Mn and B at the soil, which is given fly ash, increased. After the test crops were harvested, pH of the soil was maintained about 7 and contents of organic matter, phosphoric aicd, K, Mg, and B was increased at the soil of used fly ash. As fly ash was mixed, each DM yield of corn and rye was increased 10∼13% and 14∼21% especially alfalfa was increased 35% at the soil which is mixed fly ash with cage layer manure. As fly ash was mixed, each Crude protein (CP) of corn and rye was increased 6∼17% and about 29%, especially, as fly and cage layer manure was mixed CP of alfalfa was increased 33%. In conclusion, as fly ash is mixed with anlmal waste and use at forage crops, It makes the soil good and improve the productivity of forage crops.

• Korean Journal of Materials Research
• /
• v.28 no.2
• /
• pp.82-88
• /
• 2018

Stable slurries of YSZ in aqueous suspension with added polymer dispersants, namely, poly-methacrylic acid ammonium salt (PMMA), poly-acrylic acid (PAA) and poly-acrylic-co-maleic acid (PAMA), were mixed with the monomolecular dispersants citric acid and oxalic acid. The dispersion properties of the suspension were investigated using PSA, viscosity, sedimentation, and FT-IR. The polymer dispersants and monomolecular dispersants were attached to the YSZ surface by the carboxylic group, as shown by the FTIR results. A stabilized aqueous suspension was obtained when the polymer dispersant and citric acid were mixed and compared to the use of citric acid alone as a dispersant agent. When the polymer dispersant and citric acid were mixed and milled through attrition milling, there was a smaller particle size compared to when the polymer dispersant alone was used as a dispersant agent. This study determined that the particle size of the mixed dispersant was affected by the properties of the monomolecular dispersant and that the stability of the suspension was affected by the polymer dispersant. However, when slurries of YSZ were mixed with oxalic acid, the particle bridging behavior was the result of the high degree of viscosity and the small sedimentation height.

• Phonetics and Speech Sciences
• /
• v.10 no.3
• /
• pp.19-29
• /
• 2018

We propose to use independent component analysis (ICA) and deep neural network (DNN) to detect music sections in broadcast drama contents. Drama contents mainly comprise silence, noise, speech, music, and mixed (speech+music) sections. The silence section is detected by signal activity detection. To detect the music section, we train noise, speech, music, and mixed models with DNN. In computer experiments, we used the MUSAN corpus for training the acoustic model, and conducted an experiment using 3 hours' worth of Korean drama contents. As the mixed section includes music signals, it was regarded as a music section. The segmentation error rate (SER) of music section detection was observed to be 19.0%. In addition, when stereo mixed signals were separated into music signals using ICA, the SER was reduced to 11.8%.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1261-1261
• /
• 2001

Mixed feeds and their components are a very diverse matrix compared to other agricultural products worked on with NIRS classically. On a database of mixed feeds and their components (n=2.500) universal PLS calibrations and “local” calibrations were compared. The results from validation (n=600) show the potential of the calibrations and their limitations. Crude protein, crude fiber, crude fat, sugar and starch are predicted with SEPs of 0.6%, 1%, 0.3%, 1% and 1.5%, respectively. Ash content of 15% and more in several mixed feeds or components as well as rare components limit the use of NIRS for routine analyses.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.26 no.4
• /
• pp.109-124
• /
• 2001

This paper presents a new method that can efficiently solve the integrated problem of line balancing and model sequencing in mixed model assembly lines (MMALs). Line balancing and model sequencing are important for an efficient use of MMALs. The two problems of balancing and sequencing MMALs are tightly related with each other. However, In almost all the existing researches on mixed-model production lines, the two problems have been considered separately. In this research, an endosymbiotic evolutionary a1gorithm, which is a kind of coevolutionary a1gorithm, is adopted as a methodology in order to solve the two problems simultaneously. This paper shows how to apply an endosymbiotic evolutionary a1gorithm to solving the integrated problem. Some evolutionary schemes are used In the a1gorithm to promote population diversity and search efficiency. The proposed a1gorithm is compared with the existing evolutionary algorithms in terms of solution quality and convergence speed. The experimental results confirm the effectiveness of our approach.