• Journal of the Korean Ceramic Society
• /
• v.41 no.5
• /
• pp.395-400
• /
• 2004

The effects of compositions of binders on the rheological properties of mixtures and the preparation conditions on the formation of defects and the debinding characteristics of compacts for the injection molding of ceramic powders (65 wt% aluminaㆍ35 wt% feldspar) were studied. Ceramic powders were coated with 2 wt% of stearic acid and then mixed with 15, 20, and 25 wt% of Paraffin Wax (PW) and High Density Polyethylene (HDPE) as binders at $160^{\circ}C$ for 2 h. Rheological properties were investigated by using capillary rheometer. Apparent viscosities of mixtures were 80∼300 Paㆍs at 1,000$s^{-1}$ of a shear rate, it was good for the injection molding and depending on the compositions of binders. Short shot was formed at 15H5P5 (the ratio of HDPE : PW=5 : 5 in 15 wt% of binders) compacts without injection pressures and any noticeable defects were not formed at 45 kgf/$cm^{2}$ in 20H5P5 compacts. PW and HDPE were removed by the solvent extraction and thermal debinding method. Thermal debinding of HDPE at $450^{\circ}C$ for 5 h, which followed the extraction of PW was using n-heptane solvent at $70^{\circ}C$ for 5 h. Continuous pores in compacts, which facilitate the removal of HDPE by the thermal debinding, were found to form in the compacts when PW was removed by the solvent extraction. The optimum composition of binder at which binder was removed by thermal debinding without defects while maintaining the compact strength was 20H5P5. Bulk density, porosity and 3-point bending strength of 20H5P5 compact sintered at 1,30$0^{\circ}C$ for 5 h were 2.8, < 3%, and 2,400 kgf/$cm^{2}$, respectively, and can be used as a structural materials.

• Korean Journal of Agricultural Science
• /
• v.23 no.1
• /
• pp.70-79
• /
• 1996

Yogurts were prepared with skim milk powder added with jujube extract of 0%, 1%, 2%, 3%, 4%, 5%, respectively and fermented by mixed culture(Str. thermophilus, and Lac. bulgaricus). The fermented yogurts were evaluated for acid production(pH, titratable acidity), number of viable cell, change of sugars, sensory properties. 1. Addition of jujube extract increased acid production and decreased pH. Acid production was increased in proportion to concentration of jujube extracts added to milk and pH was decreased. 2. In yogurt fermentation, the lactic acid bacteria of yogurt added with jujube extract, increased in proportion to jujube extract concentration added to milk. 3. The viscosity was increased in proportion to concentration of jujube extract during 6 hrs. of fermentation. The viscosity of yogurt added with 4% and 5% jujube extract remarkably decreased for the first 12 hrs. Yogurt added with 5% jujube extract is lowest in its viscosity among the treatments. 4. The concentrations of glucose and fructose were higher in proportion of jujube extract add at 0 hrs. the concentration of lactose was decreased simultaneously, and those of galactose was increased in all the samples at 12 hrs. 5. The taste and odor of yogurt added with the jujube extract of 4% and 5%, respectively, were better than other samples. The color of control was better than other samples. The texture of control yogurt was better than orther samples, but was not clearly difference with the yogurts added with jujube extract of 4% and 5%. In the overall acceptability, the sensory scores of yogurt added with jujube extract of 3% and 4% were higher than other samples.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.3
• /
• pp.333-340
• /
• 2014

The purpose of this study was to develop functional lotus root bugak with plasma lipid reduction capacity by controlling the color of batter used for bugak preparation. Lotus root, nearly colorless, was selected to observe color effects. Gardeniae fructus (GF), Opuntia ficus-indica var. saboten (OF), and green tea (GT), which are colored yellow, red, and green, respectively, were used as coloring agents. Fermented glutinous rice was prepared naturally during winter season by placing glutinous rice and water (1:2, w/w) together in a crock pot for 7 days. Coloring materials (10%, w/w) were blended with glue made from fermented glutinous rice flour to prepare the batter. Cooked lotus root was then mixed with a 1.1-fold amount of batter (w/w) and dried at room temperature. Lotus root bugak (LRB) is pan-fried with un-roasted sesame oil, which is traditionally used as frying oil in Korea. Low-density lipoprotein receptor knockout ($LDLr^{-/-}$) mice (n=36) were fed an atherogenic diet (AD) containing various types of LRB (10 g%) for 10 weeks. Plasma triglyceride, total cholesterol, and LDL-C concentrations decreased significantly in mice fed LRB prepared with OF batter (OFB) and GT batter (GTB) (P<0.05). Protein expression levels of fatty acid synthase (FAS) and 3-hydroxyl-3-methylglutaryl coenzyme A reductase (HMGCR) in the OFB and GTB groups were suppressed compared with the LRB group (P<0.05). In accordance with the results on FAS and HMGCR expression, sterol regulatory element binding protein-I and II (SREBP-I and II), which are responsible for the regulation of FAS and HMGCR gene expression, respectively, were down-regulated compared to the LRB group (P<0.05). In conclusion, the plasma lipid reduction activities of OFB and GTB could be mediated through down-regulation of FAS and HMGCR mRNA expression via suppression of regulatory molecules, SREBP-I and II, in $LDLr^{-/-}$ mice.

• Resources Recycling
• /
• v.17 no.4
• /
• pp.21-29
• /
• 2008

Waste shell powder was added to the high density polyethylene(HDPE), and resultant mechanical properties and flame retardancy were analyzed in terms of shell content. Compatibilizer(PE-g-MA) was used to enhance the mechanical properties of the prepared HDPE/shell composites, and several flame retardant agents($Al_2O_3$, $Sb_2O_3$) were utilized to improve flame retardancy. Addition of the compatibilizer resulted in an improved mechanical properties due to the increased interfacial bonding between HDPE matrix and shell powder. In the case of impact strength, it even reached to the impact strength of pure HDPE. Also the addition of the flame retardant agents did not exhibit mechanical property decrease. UL-94 flammability test on the prepared HDPE/shell composites indicated that at 40wt% of shell only inclusion, time to ignite the flame and the total time of flame duration increased. When flame retardant agents mixed with shell powder were added to the HDPE matrix, improved flame retardancy was observed. Generally, flame retardancy effect of $Al_2O_3$ was better than $Sb_2O_3$. UL-94 V-0 classification was observed for the specimens with $Al_2O_3$ and compatibilizer at more than 40wt% shell, and also for specimens with $Sb_2O_3$ and compatibilizer at all shell content.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.19 no.1
• /
• pp.52-59
• /
• 1986

As one of trials to process instant sardine foods which can be preserved at room temperature, three kinds of products were prepared as seasoned-dried product (control, C), liquid smoked seasoned-dried product(S) and antioxidant treated seasoned-dried product(E), and their processing conditions and quality stability during storage were examined. Raw sardines were dressed, steamed and then filleted. The sardine fillets were seasoned with the mixed seasoning solution containing $28.0\%$ of sorbitol, $14.0%$ of sugar, $5.6\%$ of table salt, $1.8\%$ of monosodium glutamate, $0.6\%$ of garlic powder and $50.0\%$ of water at $5^{\circ}C$ for 15 hours, and dipped for 45 seconds in $10\%$ Smoke-EZ solution. After liquid smoking, the seasoned and liquid smoked sardine fillets were dried at $45^{\circ}C$ for 4 hours, vacuum packed in laminated plastic film bag(polyester/casted polypropylene= $12{\mu}m/70{\mu}m,\;15{\times}16cm$), and finally pasteurized in water at $95^{\circ}C$ for 30 minutes. The results obtained from chemical and microbial experiments during storage are as follows : the moisture contents, water activity and pH of the products showed little change, and VBN of them slightly increased during storage. The TBA value and POV of the products (E, S) were lower than those of control product(C) considerably. In color values, L value (linghtness) decreased while a and b value (red and yellow) revealed a tendency to increase during storage. The fatty acid composition of the products were similar to those of raw sardine, the predominant fatty acids were 16:0, 20:5, 18:1 and 22:6. The products (E, S) have a good preservative effect on highly unsturated fatty acids during storage. Viable cell counts of those products were negative and histamine contents were less than 2.0 mg/100 g. Among the texture profiles, hardness, elasticity and cohesiveness of the products slightly decreased during storage. Judging from the sensory evaluations, liquid smoked seasoned-dried product(S) was the most desirable, and the products could be preserved in good condition for 40 days at $25{\pm}3^{\circ}C$.

• Korean Journal of Environmental Agriculture
• /
• v.35 no.4
• /
• pp.286-293
• /
• 2016

BACKGROUND: 18% of difenoconazole+iminoctadin triacetate microemulsion (3%+15%) formulation were mixed and sprayed as closely as possible to normal practice on the ten of farms located in the Youngju of South Korea. Patches, cotton gloves, socks, masks and XAD-2 resin were used to measure the potential exposure for applicators wearing standardized whole-body outer and inner dosimeter (WBD). This study has been carried out to determine the dermal and inhalation exposure to difenoconazole during preparation of spray suspension and application with a power sprayer on a grape orchard. METHODS AND RESULTS: A personal air monitor equipped with an air pump IOM sampler and cassette and glass fiber filter were used for inhalation exposure. The field studies were carried out in a grape orchard. The temperature and relative humidity were monitored with a thermometer and a hygrometer. Wind speed was measured using a pocket weather meter. All mean field fortification recoveries were between 97.3% and 119.6% in the level of 100 LOQ (limit of quantification) while the LOQ for difenoconazole was $0.025{\mu}g/mL$ using HPLC-UVD. The arms exposure to difenoconazole for the mixer/loader (0.0794 mg) was higher than other body parts (head, hands, upper body, legs). The exposure to difenoconazole in the legs for applicator (3.78 mg) was highest in the parts of body. The dermal exposure for mixer/loader and applicator were 0.02 and 2.28 mg on a grape orchard, respectively. The inhalation exposure during application was estimated as 0.02 mg. The ratio of inhalation exposure to dermal exposure was equivalent to 0.9% of the dermal exposure. CONCLUSION: The inhalation exposure for applicator indicated $18.8{\times}10^{-3}mg$, which was level of 0.9% of the dermal exposure (2.28 mg). Operator exposure (0.004 mg/kg bw/day) to difenoconazole during treatment for grape is calculated as 2.5% of the established AOEL (0.16 mg/kg bw/day).

• Korean Journal of Agricultural Science
• /
• v.7 no.2
• /
• pp.182-189
• /
• 1980

This experiment was carried out to study on methods of processing the fruit base which is to be used for preparing the fruit yoghurts. Common fruits were compared and peach was chosen among them for this purpose by determing the rate of decrease in hardness during the process of cooking. The maturity, temperature of cooking and methods of peeling were tested to maintain the desirable hardness during the process, and the effects of metallic ion addition on the hardness of the flesh were also studied. The results obtained were as follows. 1. The peaches were keeping the most stable texture during cooking, among common fruits, however the hardness of apples were decreased markedly. Rate of decreases in the flesh hardness were high during the initial stages of cooking then slowered in all fruits tested. 2. Flesh hardness of the peaches were largely affected by the temperature of cooking. And the texture of freeze-stored fruits was severly damaged during thawing, so that could be used only for the limited purposes such as for stirred-type yoghurt. 3. Divalent matallic ions, especially calcium ion, were effective for supporting the flesh hardness of peaches during cooking. 4. The optimal concentration of calcium chloride addition was 0.3%, and this resulted in its final concentration in the product under the legal dosage without any subsquent changes in colour and flavor. 5. The effects of calcium chloride addition were greater in the froms of dices than in those of slices, and in overmature fleshs than in immature ones. 6. Treatment of calcium chloride by soaking the slices or dices of lye-peeled peaches in 0.3% solution was found to be adaptable for the practical process.

• Clean Technology
• /
• v.13 no.1 s.36
• /
• pp.54-63
• /
• 2007

Even traces of CO in the hydrogen-rich feed gas to proton exchange membrane fuel cells (PEMFC) poison the platinum anode electrode and dramatically decrease the power output. In this work, a variety of catalytic materials consisting of $Cu/Ce_xZr_{1-x}O_2$, (x = 0.0-1.0) were synthesised, characterized and tested for CO oxidation and preferential oxidation of CO (PROX). These catalysts prepared by hydrothermal and deposition-precipitation methods. The catalysts were characterized by XRD, XRF, SEM, BET, $N_2O$ titration and oxygen storage capacity (OSC) measurement. The effects of composition of the support and degree of excess oxygen were investigated fur activity and $CO_2$ selectivity with different temperatures. The composition of the support markedly influenced the PROX activity. Among the various $Cu/Ce_xZr_{1-x}O_2$ catalysts having different composition, $Cu/Ce_{0.9}Zr_{0.1}O_2$ and $Cu/Ce_{0.7}Zr_{0.3}O_2$ showed the highest activities (>99%) and selectivities (ca.50%) in the temperature range of $150{\sim}160^{\circ}C$. It was found that by using of $Ce_xZr_{1-x}O_2$ mixed oxide support which possesses a high oxygen storage capacity, oxidation-reduction activity of Cu-based catalyst was improved, which resulted in the increase of catalytic activity and selectivity of CO oxidation in excess $H_2$ environments.

• Korean Journal of Agricultural Science
• /
• v.25 no.2
• /
• pp.199-215
• /
• 1998

In order to determine the effect of tomato(Lycopersicon escylentnm mill ssp.) on the yogurt quality, skim milk powders were added with tomato juice of 0%, 1%, 3%, 5% and fermented by mixed culture(Streptococcus salivarius subsp. thermophilus and Lactobacillus delbrueckii subsp. bulgaricus. The results were summarized as follows: 1. Addition of tomato juice in skim milk decreased pH(4.3) and increased acidity(0.93%) more than control did(pH 4.6, titratable acidity 0.85%). By the addition of tomato juice, acid production was increased and pH was decreased in proportion to concentrations of tomato juices added to skim milk. 2. The number of lactic acid bacteria in yogurts added with tomato juice ($4.59{\times}10^{12}cfu/ml$) more increased than those in control yogurt($8.96{\times}10^{11}cfu/ml$). By the addition of tomato juice, the number of lactic acid bacteria counts increased in proportion to concentration of tomato juices added to skim milk. 3. As fermentation time goes by, the Brix degree sugar content in skim milk were decreased more rapidly than control. 4. The pH, titratable acidity, Brix degree and lactic acid bacteria were not significantly changed for all yogurts for the storing at $5^{\circ}C$ for 14 days. 5. In yogurt fermentation, addition of tomato juice with glucose (1% tomato juice + 4% glucose, 3% tomato juice + 2% glucose, 5% tomato juice + 0% glucose) decreased pH and increased acidity than control(5%glucose) did. In addition of tomato juice, acidity was increased and pH was decreased in proportion to concentration of tomato juices added to skim milk. 6. In yogurt fermentation, the number of lactic acid bacteria of yogurt added with tomato juice(1% tomato juice+4% glucose, 3% tomato juice+2% glucose, 5% tomato juice+0% glucose) increased than control(5% glucose). In addition of tomato juice, the number of lactic acid bacteria increased in proportion to concentration of tomato juices added to skim milk. 7. As fermentation time goes by, the Brix degree were decreased more rapidly than control(5% glucose). By the change of pH, titratable acidity, Brix degree and lactic acid bacteria, in yogurt fermentation, we definited that the promotive effect of tomato(Lycopersicon escylentnm mill ssp.) on the yogurt.

• Korean Journal of Materials Research
• /
• v.8 no.12
• /
• pp.1158-1164
• /
• 1998

Aluminium sulfate solution was prepared by sulfuric acid treatment from gibbsite. Aluminium sulfate hydrate [$Al_2(SO_4)_3$ · $nH_2O$] was precipitated from aluminium sulfate solution by adding it into ethylalcohol. From XRD analysis as-prepared $Al_2(SO_4)_3$ · $nH_2O$ was confirmed to have mixed-crystalization water(n=18, 16, 12, 6). The average water of crystalization calculated from thermogravimetry(TG) was 14.7. Aluminium sulfate hydrate [$Al_2(SO_4)_3$ · $nH_2O$] was thermally decomposed and converted to $Al_2(SO_4)_3$ at $800^{\circ}C$, $\gamma-Al_2O_3$ at $900-1000^{\circ}C$, and $\alpha-Al_2O_3$ at $1200^{\circ}C$. Ni-doped $\gamma-Al_2O_3$, was synthesized from the slurry of as-prepared $\gamma-Al_2O_3$, with the ratio of [Ni]/[Al]=0.5. The reaction conditions of synthesis were determined as initial pH 9.0 and temperature $80^{\circ}C$ The basicity(pH) of slurry was controlled by using urea and $NH_4OH$ solution. Urea was also used for deposition-precipitation. For determining termination of reaction, the data acquisition was performed by oxidation reduction potential(ORP), conductivity and pH value in the process of reaction. Termination of the reaction was decided by observing the reaction steps and rapid decrease in conductivity. On the other hand, BET(Brunauer, Emmett and Teller) and thermal diffusity of Ni- doped $\gamma-Al_2O_3$, with various content of Ni were measured and compared. Thermal stability of Ni- doped $\gamma-Al_2O_3$ at $1250^{\circ}C$ was confirmed from BET and XRD analysis. The surface state of Ni-doped $\gamma-Al_2O_3$ was investigated by X-ray photoelectron spectroscopy(XPS). The binding energy at $Ni2P_{3/2}$ increased with increasing the formation of $NiAl_2O_4$ phase.