• Preventive Nutrition and Food Science
• /
• 제2권4호
• /
• pp.296-300
• /
• 1997

Glucose syrup and lactose, mixed with citric acid as a polymerizing catalyst, was processed using twin screw extruder, in which 40 of L/D(length/diameter) ratio was designed to provide sufficient retention in extruder for polymerization of sugars. The polymerization yields of glucose syrup were 36.90%, 55.44% and 77.10% at 160, 180 and 20$0^{\circ}C$, respectively, while those of lactose were 26.45%, 38.16% and 45.86% at the same temperatures. Gel permeation chromatography exhibited that the higher molecular weight fractions were increased with extrusion temperature, which also led to increasing hydrodynamic intrinsic viscosity. Both uco-oligosaccharides and lacto-oligosaccharides produced by extrusion of glucose syrup and lactose were stable for thermal treatments over a wide range of pH3.0~11.0. In addition, $\alpha$-amylase and amyloglucosidase treatment of gluco-oligosaccharides did not affect the solution viscosity, indicating the random linkage rather than $\alpha$-1, 4 linkages of glucose and thus the potential applications as a dietary fiber. In this research it was clearly observed that twin screw extrusion can be successfully utilized to produce gluco-oligosaccharides and lacto-oligosaccharides rapidly and continuously in conjunction with selective control of polymerized composition.

• 한국임상약학회지
• /
• 제11권2호
• /
• pp.68-77
• /
• 2001

Herbal medicines have been used since ancient times as medicines to treat and relieve the symptoms of many different human diseases. However, so far, relatively few herbal medicines have been evaluated scientifically to prove their safety, potential benefits and effectiveness. This study was conducted to provide the groundwork for improving the current registration regulations for herbal medicines in distinction from synthetic medicines. The study was performed based on the literature research and individual interviews with 5 experts who had extensive experience in registration of herbal medicines. When compared with synthetic drugs, herbal medicines exhibit some marked differences, namely the active principles are frequently unknown, standardization, stability and quality control are not easy, they are usually mixtures of complex compounds. Second, the current regulations for herbal medicines are reviewed by comparison of foreign regulation systems like the one in China. The regulation requirements of herbal medicine in China are in distinction from synthetic drugs. The authors conclude that new registration requirements for the herbal medicines should be changed as follows; the toxicity and efficacy data should be submitted as mixed herbal preparation and the documents and other research on the reproduction and generation toxicity need to be shown for the proof of reproduction and generation toxicity, if needed.

• Journal of Korean Society for Atmospheric Environment
• /
• 제15권E호
• /
• pp.39-43
• /
• 1999

To help idntify the potential sources of volatile organic sulfur compounds within the continental environment, we have conducted preliminary measurements of dimethylsulfide(DMS) during field campains held from three reference sites. These sampling sites were located within a waste reclamation facility in Won Ju City, Kang Won Province. The results of our measurements showed that DMS levels spanned over 1 to 55 pptv with a mean and 1 standard deviation(1SD) of 12 and 18 pptv(N=13). In a comparison of the data derived from the strongest sources, i.e., oceanic environment, the DMS levels in thre reclamation facility were jpronouncingly low with high day-to-night concentration ratios. It was noted that a significant difference in DMS levels between daytime and nighttime periods was mainly driven by a few exceptional data measured during daytime. Despite limitations of our measurement data in deriving meaningful interpretations of spatiotemporal distributions of DMS in inland facilities, the existence of extraordinary trends, i.e., especially "lower-than-expectedL" DMS values, can be explained in terms of mixed effects of several factors. Most importantly, we can infer that the rates of DMS production and of its destruction in the study site are at or near steady-state condition. Another possibility is that DMS is not adequate enough to explain the generally malordorous environment of reclamation sites, of particular in Won Ju area.n Ju area.

• 펄프종이기술
• /
• 제33권2호
• /
• pp.58-67
• /
• 2001

MOW (Mixed Office Waste) mainly consisted of photocopied paper is being recycled to produce tissue or fine paper products. Toner particles that are fused and set on paper surface in photocopying process turns into large and plate-shaped particles after repulping which prevents them to be removed effectively in flotation deinking. The immediate purpose of this study is to find the effective deinking technology that increases the recycling potential of photocopied papers for manufacturing tissue and fine paper products. In this study the effects of pulping temperature and the type of hydrophobic groups of nonionic surfactants on the deinking efficiency of photocopied paper has been investigated. Particle size distribution of the toner particles after pulping and flotation, brightness, yield and ash removal were investigated. The size of toner particles after pulping increased as the pulping temperature was increased. When pulping at the low temperature finer toner particles were generated, however, greater amount of toner particles was found to attach to the fiber. When the pulping temperature was greater than Tg of the toner, the amount of coarse hairy particles increased. When nonionic surfactants with a double bond in hydrophobic groups were used, toner removal efficiency, brightness and ash removal were increased. As the addition level of surfactant was increased, yield decreased rather sharply without improving brightness.

• Journal of Microbiology
• /
• 제44권1호
• /
• pp.92-97
• /
• 2006

We developed an mPCR assay for the simultaneous detection, in one tube, of Escherichia coli O157:H7, Salmonella spp., Staphylococcus aureus and Listeria monocytogenes using species-specific primers. The mPCR employed the E. coli O157:H7 specific primer Stx2A, Salmonella spp. specific primer Its, S. aureus specific primer Cap8A-B and L. monocytogenes specific primer Hly. Amplification with these primers produced products of 553, 312, 405 and 210 bp, respectively. All PCR products were easily detected by agarose gel electrophoresis, and the sequences of the specific amplicons assessed. Potential pathogenic bacteria, in laboratory-prepared and four commercially available kimchi products, were using this mPCR assay, and the amplicons cloned and sequenced. The results correlated exactly with sequences derived for amplicons obtained during preliminry tests with known organisms. The sensitivity of the assay was determined for the purified pathogen DNAs from four strains. The mPCR detected pathogen DNA at concentrations ranging from approximately 0.45 to $0.05\;pM/{\mu}l$. Thus, this mPCR assay may allow for the rapid, reliable and cost-effective identification of four potentially pathogens present in the mixed bacterial communities of commercially available kimchi.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1262-1263
• /
• 2011

Sulfur hexafluoride is the most commly used insulation gas in electrical systems. Gas insulated systems are widely used in the electric power industry for transmission and distribution of electrical energy. When $SF_6$ was first discovered, the potential application was only considered for insulation because of good dielectric properties. But the widespread use of $SF_6$ gas by electric power and other industries has led to increase concentrations of $SF_6$ gas in the atmosphere. This concern as to possible effects on global warming because $SF_6$ is a potent greenhouse gas. That's why firstly we studied uniform and nonuniform field property by mixing $SF_6$ and N2 gas. This paper presents the dielectric strength and insulating property for particle contamination under $SF_6/N_2$ mixtures. Two types of mixed gases(50% $SF_6$_50%$N_2$, 20% $SF_6$_80%$N_2$) were applied. We performed tests for the length and shape of particle. Test gas pressure is from 0.3 to 0.7 Mpa. The study was conducted to develop environment-friendly insulating material for GIS that can reduce $SF_6$ gas and make a design criteria for mixtures.

• 한국해양공학회지
• /
• 제23권6호
• /
• pp.12-16
• /
• 2009

In this study, the wave profiles and kinematics of highly nonlinear waves at various water depths were calculated using a 2D fully nonlinear Numerical Wave Tank (NWT). The NWT was developed based on the Boundary Element Method (BEM) with the potential theory and the mixed Eulerian-Lagrangian (MEL) time marching scheme by 4th-order Runge-Kutta time integration. The spatial variation of intermediate-depth waves along the direction of wave propagation was caused by the unintended generation of 2nd-order free waves, which were originally investigated both theoretically and experimentally by Goda (1998). These free waves were induced by the mismatch between the linear motion of wave maker and nonlinear displacement of water particles adjacent to the maker. When the 2nd-order wave maker motion was applied, the spatial modulation of the waves caused by the free waves was not observed. The respective magnitudes of the nonlinear wave components for various water depths were compared. It was found that the high-order wave components greatly increase as the water depth decreases. The wave kinematics at various locations were calculated and compared with the linear and the Stokes 2nd-order theories.

• 한국전기전자재료학회논문지
• /
• 제25권8호
• /
• pp.651-656
• /
• 2012

A study on capacitive characteristics of stylus pen for touch panel are progressed in this paper. Also the main factors for capacitive sensitivity are studied. Namely, highly sensitive stylus pen which can be applied to capacitive touch panel are studied based on the analysis of materials and process conditions regardless of pattern shapes. Stylus pen was made of PDMS(Poly-Di-Methyl-Siloxane) and conductive metal powders which does not damage the touch panel surface. We tried to get the advantages of both the properties of soft PDMS and conductive metal powders. We found that potential difference of capacitance change with conductivity of the composite materials(PDMS + metal powders) it implies that during touch process, large voltage difference can be caused by the high conductive materials of stylus pen. Stylus pen made by PDMS with mixed with Ag powders which has large conductivity shows more capacitance change of 1 pF than PDMS with other materials of Ni or C powders.

• 한국실내디자인학회논문집
• /
• 제24권1호
• /
• pp.152-159
• /
• 2015

Contemporary architecture is philosophy and art, and science are different that holds the architecture of human thought and behavior based on a variety of physical space. In addition, the technology is used by the new media graphics, lasers, LED, which were possible only in imagination, using tools such as the time-space of the potential for explosion. In particular, it was found in the spacial color of atypical using the nature of light. Such these architecture is space people actively experiencing a sense towards the expansion of its place. Therefore, the study purpose is to explore the Steven Holl's spacial colors to utilize the space is important to the possibility of light. He prefers the connection to the invisible world is inferred from the visible world and other space. He thoughts an idea linked to the concept watercolors which is a tool that holds to the notion of the flexibility of light and shadow. Concept watercolor is the idea space, establish space, recombinant space, and the growthy space. These have shown the no fixed spacial color cause of the combination of the different tones according to the characteristics of the mixed-color development of a concept watercolors demonstrated the spacial color of the replacement. That is to establish a parody of the works light blending spacial color.

• 한국버섯학회지
• /
• 제15권4호
• /
• pp.164-167
• /
• 2017

Biological efficiency (BE), the ratio of fresh mushrooms harvested per dry substrate weight, expressed as the percentage of Lentinula edodes, also known as shiitake, was determined using the 'Sanjo 701' strain stored in the Department of Mushroom at the Korea National College of Agriculture and Fisheries. The mycelia were grown in glass columns with varying levels of moisture content and varying mixing periods of 0.5, 1, 2, and 3 hours. The substrate was sterilized using a steam pressure autoclave sterilizer at normal and high pressure to avoid contamination. The results showed that mycelial growth (126 mm/15 days) was optimized at 55% moisture content. The best mycelial growth of 117 mm/15 days was obtained with 2 hours of mixing time. Normal pressure sterilization yielded better results with mycelial growth of 96 mm/15 days at $100^{\circ}C$ compared to 88 mm /15 days with sterilization at $121^{\circ}C$. Mycelial density was higher, i.e. 3(+++), with normal pressure sterilization compared to 2(++) with high pressure sterilization. Furthermore, sawdust mixed with 5% woodchips increased the substrate porosity and yielded higher mycelial growth. Thus, we demonstrated that the optimum harvest or potential increased yield of shiitake can be obtained by modulating moisture content, mixing time, and substrate porosity.