• 한국CDE학회논문집
• /
• 제1권1호
• /
• pp.1-19
• /
• 1996

Non-manifold topological representations can provide a single unified representation for mixed dimensional models or cellular models and thus have a great potential to be applied in many application areas. Various boundary representations for non-manifold topology have been proposed in recent years. These representations are mainly interested in describing the sufficient adjacency relationships and too redundant as a result. A model stored in these representations occupies too much storage space and is hard to be manipulated. In this paper, we proposed a compact hierarchical non-manifold boundary representation that is extended from the half-edge data structure for solid models by introducing the partial topological entities to represent some non-manifold conditions around a vertex, edge or face. This representation allows to reduce the redundancy of the existing schemes while full topological adjacencies are still derived without the loss of efficiency. To verify the statement above, the storage size requirement of the representation is compared with other existing representations and present some main procedures for querying and traversing the representation. We have also implemented a set of the generalized Euler operators that satisfy the Euler-Poincare formula for non-manifold geometric models.

• Smart Structures and Systems
• /
• 제16권5호
• /
• pp.781-806
• /
• 2015

A unified formulation of finite layer methods (FLMs), based on the Reissner mixed variational theorem (RMVT), is developed for the three-dimensional (3D) coupled electro-elastic analysis of simply-supported, functionally graded piezoelectric material (FGPM) plates with open- and closed-circuit surface conditions and under electro-mechanical loads. In this formulation, the material properties of the plate are assumed to obey an exponent-law varying exponentially through the thickness coordinate, and the plate is divided into a number of finite rectangular layers, in which the trigonometric functions and Lagrange polynomials are used to interpolate the in- and out-of-plane variations of the primary field variables of each individual layer, respectively, such as the elastic displacement, transverse shear and normal stress, electric potential, and normal electric displacement components. The relevant orders used for expanding these variables in the thickness coordinate can be freely chosen as the linear, quadratic and cubic orders. Four different mechanical/electrical loading conditions applied on the top and bottom surfaces of the plate are considered, and the corresponding coupled electro-elastic analysis of the loaded FGPM plates is undertaken. The accuracy and convergence rate of the RMVT-based FLMs are assessed by comparing their solutions with the exact 3D piezoelectricity ones available in the literature.

• Geomechanics and Engineering
• /
• 제9권4호
• /
• pp.447-464
• /
• 2015

Millions of scrap tires are discarded annually in Turkey. The bulk of which are currently landfilled or stockpiled. These tires consume valuable landfill space or if improperly disposed, create a fire hazard and provide a prolific breeding ground for rats and mosquitoes. Used tires pose both a serious public and environmental health problem which means that economically feasible alternatives for scrap tire disposal must be found. Some of the current uses of scrap tires are tire-derived fuel, creating barrier reefs and as an asphalt additive in the form of crumb rubber. However, there is a much need for the development of additional uses for scrap tires. One development the creation of shreds from scrap tires that are coarse grained, free draining and have a low compacted density thus offering significant advantages for use as lightweight subgrade fill and backfill material. This paper reports a comprehensive laboratory study that was performed to evaluate the use of a shredded tire-sand mixture as a backfill material in trench conditions. A steel frame test tank with glass walls was created to replicate a classical trench section in field conditions. The results of the test demonstrated that shredded tires mixed with sand have a definite potential to be effectively used as backfill material for buried pipe installations.

• 대한조선학회논문집
• /
• 제47권3호
• /
• pp.388-397
• /
• 2010

A two-dimensional time-domain, potential-theory-based fully nonlinear numerical wave tank (NWT) was developed by using boundary element method and the mixed Eulerian-Lagrangian (MEL) approach for free-surface node treatment. The NWT was applied to prediction of primary wave energy conversion efficiency of a bottom-mounted oscillating water column (OWC) wave power device. The nonlinear free-surface condition inside the chamber was specially devised to represent the pneumatic pressure due to airflow velocity and viscous energy loss at the chamber entrance due to wave column motion. The newly developed NWT technique was verified through comparison with given experimental results. The maximum energy extraction was estimated with various chamber-air duct volume ratios.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2003년도 생물공학의 동향(XIII)
• /
• pp.815-820
• /
• 2003

A huge database resulted from whole genome sequencing has provided a possibility of new information that is likely to extent the scope and thus changes the way of approach for the functional assigning of putative open reading frames annotated by whole genome sequence analyses. These are mainly realized by ease, one-step identification of putative genes using genomics or proteomics tools. A major challenge remained in biotechnology may translate these informations into better ways to screen or select a gene as a representative sequence. Further attempts to mine the related whole genes or partial DNA fragment from whole genome treasure, and then the incorporation of these sequences into a representative template, will result in the use of putative genes that can be translated into functional proteins or allowed the generation of new lineages as a valuable pool. Such screens enable rapid biochemical analysis and easy isolation of the target activity, thereby accelerating the screening of novel enzymes from the expanded library with related sequences. Information-based PCR amplification of whole genes and reconstitution of functional DNA fragments will provide a platform for expanding the functional spaces of potential enzymes, especially when used mixed- or metagenome as gene resources.

• Preventive Nutrition and Food Science
• /
• 제2권4호
• /
• pp.296-300
• /
• 1997

Glucose syrup and lactose, mixed with citric acid as a polymerizing catalyst, was processed using twin screw extruder, in which 40 of L/D(length/diameter) ratio was designed to provide sufficient retention in extruder for polymerization of sugars. The polymerization yields of glucose syrup were 36.90%, 55.44% and 77.10% at 160, 180 and 20$0^{\circ}C$, respectively, while those of lactose were 26.45%, 38.16% and 45.86% at the same temperatures. Gel permeation chromatography exhibited that the higher molecular weight fractions were increased with extrusion temperature, which also led to increasing hydrodynamic intrinsic viscosity. Both uco-oligosaccharides and lacto-oligosaccharides produced by extrusion of glucose syrup and lactose were stable for thermal treatments over a wide range of pH3.0~11.0. In addition, $\alpha$-amylase and amyloglucosidase treatment of gluco-oligosaccharides did not affect the solution viscosity, indicating the random linkage rather than $\alpha$-1, 4 linkages of glucose and thus the potential applications as a dietary fiber. In this research it was clearly observed that twin screw extrusion can be successfully utilized to produce gluco-oligosaccharides and lacto-oligosaccharides rapidly and continuously in conjunction with selective control of polymerized composition.

• 한국임상약학회지
• /
• 제11권2호
• /
• pp.68-77
• /
• 2001

Herbal medicines have been used since ancient times as medicines to treat and relieve the symptoms of many different human diseases. However, so far, relatively few herbal medicines have been evaluated scientifically to prove their safety, potential benefits and effectiveness. This study was conducted to provide the groundwork for improving the current registration regulations for herbal medicines in distinction from synthetic medicines. The study was performed based on the literature research and individual interviews with 5 experts who had extensive experience in registration of herbal medicines. When compared with synthetic drugs, herbal medicines exhibit some marked differences, namely the active principles are frequently unknown, standardization, stability and quality control are not easy, they are usually mixtures of complex compounds. Second, the current regulations for herbal medicines are reviewed by comparison of foreign regulation systems like the one in China. The regulation requirements of herbal medicine in China are in distinction from synthetic drugs. The authors conclude that new registration requirements for the herbal medicines should be changed as follows; the toxicity and efficacy data should be submitted as mixed herbal preparation and the documents and other research on the reproduction and generation toxicity need to be shown for the proof of reproduction and generation toxicity, if needed.

• Journal of Korean Society for Atmospheric Environment
• /
• 제15권E호
• /
• pp.39-43
• /
• 1999

To help idntify the potential sources of volatile organic sulfur compounds within the continental environment, we have conducted preliminary measurements of dimethylsulfide(DMS) during field campains held from three reference sites. These sampling sites were located within a waste reclamation facility in Won Ju City, Kang Won Province. The results of our measurements showed that DMS levels spanned over 1 to 55 pptv with a mean and 1 standard deviation(1SD) of 12 and 18 pptv(N=13). In a comparison of the data derived from the strongest sources, i.e., oceanic environment, the DMS levels in thre reclamation facility were jpronouncingly low with high day-to-night concentration ratios. It was noted that a significant difference in DMS levels between daytime and nighttime periods was mainly driven by a few exceptional data measured during daytime. Despite limitations of our measurement data in deriving meaningful interpretations of spatiotemporal distributions of DMS in inland facilities, the existence of extraordinary trends, i.e., especially "lower-than-expectedL" DMS values, can be explained in terms of mixed effects of several factors. Most importantly, we can infer that the rates of DMS production and of its destruction in the study site are at or near steady-state condition. Another possibility is that DMS is not adequate enough to explain the generally malordorous environment of reclamation sites, of particular in Won Ju area.n Ju area.

• 펄프종이기술
• /
• 제33권2호
• /
• pp.58-67
• /
• 2001

MOW (Mixed Office Waste) mainly consisted of photocopied paper is being recycled to produce tissue or fine paper products. Toner particles that are fused and set on paper surface in photocopying process turns into large and plate-shaped particles after repulping which prevents them to be removed effectively in flotation deinking. The immediate purpose of this study is to find the effective deinking technology that increases the recycling potential of photocopied papers for manufacturing tissue and fine paper products. In this study the effects of pulping temperature and the type of hydrophobic groups of nonionic surfactants on the deinking efficiency of photocopied paper has been investigated. Particle size distribution of the toner particles after pulping and flotation, brightness, yield and ash removal were investigated. The size of toner particles after pulping increased as the pulping temperature was increased. When pulping at the low temperature finer toner particles were generated, however, greater amount of toner particles was found to attach to the fiber. When the pulping temperature was greater than Tg of the toner, the amount of coarse hairy particles increased. When nonionic surfactants with a double bond in hydrophobic groups were used, toner removal efficiency, brightness and ash removal were increased. As the addition level of surfactant was increased, yield decreased rather sharply without improving brightness.

• Journal of Microbiology
• /
• 제44권1호
• /
• pp.92-97
• /
• 2006

We developed an mPCR assay for the simultaneous detection, in one tube, of Escherichia coli O157:H7, Salmonella spp., Staphylococcus aureus and Listeria monocytogenes using species-specific primers. The mPCR employed the E. coli O157:H7 specific primer Stx2A, Salmonella spp. specific primer Its, S. aureus specific primer Cap8A-B and L. monocytogenes specific primer Hly. Amplification with these primers produced products of 553, 312, 405 and 210 bp, respectively. All PCR products were easily detected by agarose gel electrophoresis, and the sequences of the specific amplicons assessed. Potential pathogenic bacteria, in laboratory-prepared and four commercially available kimchi products, were using this mPCR assay, and the amplicons cloned and sequenced. The results correlated exactly with sequences derived for amplicons obtained during preliminry tests with known organisms. The sensitivity of the assay was determined for the purified pathogen DNAs from four strains. The mPCR detected pathogen DNA at concentrations ranging from approximately 0.45 to $0.05\;pM/{\mu}l$. Thus, this mPCR assay may allow for the rapid, reliable and cost-effective identification of four potentially pathogens present in the mixed bacterial communities of commercially available kimchi.