• 제목/요약/키워드: Mixed potential

검색결과 984건 처리시간 0.028초

고분자 변형으로 가능해진 MOF의 원위치 형성을 이용한 혼합기질 기체분리막의 대면적화 가능한 제막 (Scalable Fabrications of Mixed-Matrix Membranes via Polymer Modification-Enabled In Situ Metal-Organic Framework Formation for Gas Separation: A Review)

  • 박성환;이영세
    • 공업화학
    • /
    • 제34권3호
    • /
    • pp.213-220
    • /
    • 2023
  • 혼합기질막(mixed-matrix membrane, MMM)은 고성능 충전제가 고분자 기질에 분산된 구조로, 지난 30년간 이를 이용한 기체분리 연구가 집중적으로 수행되었다. 일반적으로 MMM은 고분자 막보다 우수한 기체 분리 성능을 가지고 있으며, 다결정 막에 비해 좋은 확장성을 보인다. 그러나 이러한 잠재성에도 불구하고, MMM의 상용화는 여러 가지 어려운 문제들로 인해 지연되고 있다. MMM의 주요 문제 중 하나는 충전제와 고분자 사이의 부적절한 계면 상호작용으로 결함(즉, 개면 공극 등)이 형성될 수 있다는 것이다. 따라서 많은 MMM 연구에서 이러한 계면의 문제를 해결하기 위한 전략이 제시되었다. 하지만 계면상의 상호작용으로 MMM이 가진 문제점들을 해결하려는 과학적 접근에 비해 손쉽고 효과적으로 대면적의 MMM을 제조하기 위한 공학적 접근은 상대적으로 간과되어 왔다. 본 총설에서는 MMM의 대면적화를 위한 공학적인 접근 중 하나인 고분자 변형을 통해 가능해진 금속-유기 골격체(metal-organic framework, MOF)의 원위치 형성을 이용한 MMM 제막 방법을 소개하고자 한다. 이 새로운 제막법은 현재 MMM이 직면하고 있는 문제들을 공학적인 접근으로 효과적으로 해결하여 MMM의 상용화를 촉진시킬 수 있다.

점토와 혼합된 제강슬래그의 이온 용출 및 재활용 가능성 평가 (Assessment of Ion Leaching and Recycling Potential of Steel Slag Mixed with Clay)

  • 김형주;이현기;함태규;정소희;김형수
    • 한국지반환경공학회 논문집
    • /
    • 제25권5호
    • /
    • pp.39-47
    • /
    • 2024
  • 본 연구에서는 재활용 시 도로용이나 지반 보강재로 사용되는 전기로 제강슬래그의 입경별 중금속 용출 실험과 제강슬래그와 점토를 혼합한 혼합비별 공시체의 이온 용출을 실험하여 환경적 특성을 분석하였다. 폐기물 공정시험결과 시료 시험항목에서 중금속은 검출되지 않은 것으로 나타났으며, 물과 접하지 않은 제강슬래그의 경우 용출이 일어나지 않는 것을 알 수 있었으나, 제강슬래그의 중금속 용출 실험을 진행하여 ICP-OES 분석한 결과 일부 중금속이 검출되었다. 제강슬래그가 물과 반응하면 제강슬래그 내에 존재하는 Free CaO와 화학반응이 일어나 용출이 되는 것을 알 수 있었다. 제강슬래그의 입경별 용출 실험을 진행한 결과 가장 많은 용출이 일어난 알루미늄의 경우 입경이 작을수록 커지는 것으로 나타났으며, 제강슬래그와 점토를 혼합한 혼합토의 경우 제강슬래그의 함량이 증가할수록 알루미늄의 용출량은 증가하였다. 그러나 제강슬래그만을 사용했을 때보다 제강슬래그와 점토의 혼합토에서 용출되는 알루미늄의 양이 현저히 낮아졌으며, 다른 중금속들도 용출되는 양이 기준치 이하로 나타났다. 그러므로 제강슬래그와 점토의 혼합토를 재활용하여 도로용이나 성토용 재료로 사용 시 중금속의 용출에 대한 우려는 매우 낮아질 것으로 사료된다. 이러한 결과는 순수 제강슬래그만을 사용하는 것보다 제강슬래그와 점토를 혼합한 재료가 친환경적으로 지속가능하고 안전한 대안이 될 수 있다고 판단된다.

자연냉매 $CO_2$환경에서 스크롤 압축기 구동부의 마찰 마멸특성 평가 (Friction and Wear of the Scroll Compressor Sliding Surfaces in the Natural Refrigerant $CO_2$ Environment)

  • 오세두;문재용;조성욱;이인주;김철우;이영제
    • Tribology and Lubricants
    • /
    • 제19권3호
    • /
    • pp.146-150
    • /
    • 2003
  • The natural refrigerant $CO_2$has attracted as an alternative refrigerant currently used in air conditioning system, which has high global warming potential. In this study, the tribological characteristics of the sliding surfaces between a fixed scroll and an orbiting scroll of the scroll compressor were investigated in $CO_2$/ POE mixed environment. The pin-on-disk type sliding tests were carried out under the various sliding speeds, normal loads. surface roughness, and pressures. During the test, friction forces, wear amount and surface temperature were monitored.

A time-domain simulation of an oscillating water column with irregular waves

  • Koo, Weoncheol;Kim, Moo-Hyun
    • Ocean Systems Engineering
    • /
    • 제2권2호
    • /
    • pp.147-158
    • /
    • 2012
  • A time-domain simulation of a land-based Oscillating Water Column (OWC) with various irregular waves as a form of PM spectrum is performed by using a two-dimensional fully nonlinear numerical wave tank (NWT) based on the potential theory, mixed Eulerian-Lagrangian (MEL) approach, and boundary element method. The nonlinear free-surface condition inside the OWC chamber was specially devised to describe both the pneumatic effect of the time-varying pressure and the viscous energy loss due to water column motions. The quadratic models for pneumatic pressure and viscous loss are applied to the air and free surface inside the chamber, and their numerical results are compared with those with equivalent linear ones. Various wave spectra are applied to the OWC system to predict the efficiency of wave-energy take-off for various wave conditions. The cases of regular and irregular waves are also compared.

균열된 쉘의 파괴역학해석을 위한 선진유한요소기법 (Advanced Finite Element Technology for Fracture Mechanics Analysis of Cracked Shells)

  • 우광성
    • 전산구조공학
    • /
    • 제4권2호
    • /
    • pp.77-85
    • /
    • 1991
  • 선형탄성파괴역학에서 특히 균열 쉘의 응력집중계수 산정을 위해 p-version 유한요소법에 기초한 선진유한요소기법이 제안되었다. 세가지 균열된 쉘 예제를 통해 응력집중계수 산정은 종래의 h-version 유한요소모델에 비하여 p-version 유한요소 모델이 수렴성과 정확도 면에서 훨씬 더 적합함을 보여주고 있다. 이 기법의 주요 이점은 근사해의 정확도가 요소분할이나 균열선단요소 또는 혼합형 변분원리등의 특별고려가 없이 확보될 수 있다는데 있다.

  • PDF

Heavy Metal Biosorption and its Significance to Metal Tolerance if Streptomycetes

  • Park, Jae-young;Kim, Jae-heon
    • Journal of Microbiology
    • /
    • 제40권1호
    • /
    • pp.51-54
    • /
    • 2002
  • Heavy metal adsorptions of four streptomycetes were compared with each other, Among the test strains, Streptomyces viridochromogenes showed the most efficient metal binding activity, which was carried out by cell wall as well as freeze-dried mycelium. An order of adsorption potential (zinc > copper > lead > cadmium) was observed in single metal reactions, whereas this adsorption order was disturbed in mixed-metal reactions. The metal adsorption reactions were very fast, pH dependent and culture age-independen, suggestive of a physico-chemical reaction between cell wall components and heavy metal ions. The metal tolerant stains presented the weakest adsorbing activity, indicating that the metal biosorption was not the basis of the metal tolerance.

A106 GrB강 용접부의 염수중 부식피로 특성 (Corrosion Fatigue Characteristics of A106-GrB Steel Weldments in NaCl solution)

  • 김철환
    • 한국공작기계학회:학술대회논문집
    • /
    • 한국공작기계학회 1997년도 춘계학술대회 논문집
    • /
    • pp.143-149
    • /
    • 1997
  • the horizontal corrosion fatigue tester has been developed for investigating environmental strength. Using this tester, we investigated about corrosion fatigue caracteristic for A106 GrB steel weldments in 3.5% synthetic seawater and room temperature. Considered parameter is only frequency of 1,3 and 5Hz. and Corrosion fatigue crack length was measured by DC potential difference method. From the results, we could find that the horizontal corrosion fatiued tester could be well applied to estimation of fatigue strength. and In case of 5Hz, corrosion fatigue crack growth path of A106 GrB steel weldment was transgranular, and of 1 and 3Hz showed that transgranular and intergranular was mixed. Also, Corrosion fatigue crack growth caracteristic values estimated in each frequency were C=9.33 x 10-9 and m=2.93 in 1Hz, C=9.77x10-10 and m=3.47 in 3Hz, C=1.02x10-10 and m=4.05 in 1Hz

  • PDF

2차원 선형 탄성 이방성 재료에서 $J_k$-적분을 이용한 응력확대계수 계산 (Calculation of Stress Intensity Factor in 2-D Using $J_k$-Integral for a Rectilinear Elastic Anisotropic Body)

  • 안득만;최창연
    • 한국정밀공학회지
    • /
    • 제18권7호
    • /
    • pp.134-142
    • /
    • 2001
  • The integrals $J_k$(k=1,2) in the rectilinear anisotropis body in 2-D were determined using Lekhnitskii formalism. The relationship between $J_k$ and stress intensity factors are implified by the important equation between elastic compliance. The numerical evaluation of stress intensity factor for the single edge crack in mixed mode is determined by superposing known exact solutions.

  • PDF

D-리모넨 오일의 유화특성 (Characterization of Emulsion Properties for D-limonene)

  • 하윤식;장윤호;문현수;이정경;서무룡
    • 한국환경과학회지
    • /
    • 제7권6호
    • /
    • pp.875-881
    • /
    • 1998
  • Microemulsion is prepared by the method of phase inversion emulsification with d-limonene that is environmental friendly substance and nontoxic to human body as dispersed phase. Emulsifier used for preparation of microemulsion is nonionic surfactants, polyoxyethylene nonylphenyl ether. Stability of prepared microemulsion was estimated by the various method of ξ-potential, hydrodynamic diameter and electric conductivity. When d-limonene is emulsified by NP series, microemulsion is most stable and narrowly distributed at HLB value of 12.3(either one emulsifier or mixed emulsifiers). Stability of microemulsion is increased as the amount of emulsifiers is increased at same HLB value of 12.3. In the case of using the same amount of emulsifiers, number of produced micelle are relatively large as hydrodynamic diameter is small. Therefore, the state of microemulsion is stable and the electric conductivity is increased. One can determine that higher electric conductivity value means that microemulsion has more micelles and is more stable.

  • PDF

ISP 네트워크간 상호접속 모델 (An Interconnection Model of ISP Networks)

  • 최은정;차동완
    • 한국경영과학회지
    • /
    • 제30권4호
    • /
    • pp.151-161
    • /
    • 2005
  • For Internet service providers (ISPs), there are three common types of interconnection agreements : private peering, public peering and transit. One of the most important problems for a single ISP is to determine which other ISPs to interconnect with, and under which agreements. The problem can be then to find a set of private peering providers, transit providers and Internet exchanges (IXs) when the following input data are assumed to be given : a set of BGP addresses with traffic demands, and a set of potential service providers (Private peering/transit providers and IXs) with routing information, cost functions and capacities. The objective is to minimize the total interconnection cost. We show that the problem is NP-hard, give a mixed-integer programming model, and propose a heuristic algorithm. Computational experience with a set of test instances shows the remarkable performance of the proposed algorithm of rapidly generating near-optimal solutions.