• Bulletin of the Korean Chemical Society
• /
• v.1 no.2
• /
• pp.49-54
• /
• 1980

Solutions of $Ni^{2+}$ and $Cd^{2+}$ were mixed with the solutions of various dibasic organic acids in the presence of cation exchange resin at room temperature. The distribution ratios of the metal ions between resin and solution were measured, using radioactive metal ions as tracer. From the observed variation of the distribution ratios with acid anion concentrations, it was concluded that $Ni^{2+}$ and $Cd^{2+}$ formed one-to-one complexes with succinate, malonate, o-phthalate and tartarate ions in aqueous, 20 % ethanol-water and 20 % acetone-water solutions. The results of the present study indicated that the relative stabilities of the complexes in solution increased generally in the order : $Ni^{2+}$ < $Cd^{2+}$ complexes. Succinate < malonate < o-phthalate < tartarate complexes. Aqueous < mixed solvent systems.

• Toxicological Research
• /
• v.17 no.1
• /
• pp.7-9
• /
• 2001

The quantitative assessment of the penetration of organic solvents through skin is necessary for the evaluation of health hazards in occupational environments. We investigated the rate of dermal penetration when mixed or single forms of organic solvents were placed into a diffusion cell in vitro or into an experimental animal in vivo. The diffusion rates of methanol. toluene, and styrene were 6.07, 0.129, and 0.046 mg/$cm^2$/h, respectively. When skin was exposed to the mixed solvent of methanol and toluene, the penetration rate of toluene did not change significantly (0.110 mg/$cm^2$/h). However, the rate of methanol penetration increased to 43.90 mg/$\textrm{cm}^2$/h. The penetration rate of methanol also increased significantly to 54.69 mg/$cm^2$/h by mixing it with styrene. The concentration of methanol in the blood was monitored during the epicutaneous exposure in rats. The blood concentration of methanol was increased by mixing methanol with toluene as seen in the in vitro experiments. These results showed that the penetration rate of organic solvents would be enhanced by mixing them with other solvents.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.2
• /
• pp.466-470
• /
• 2014

In this paper, organic solvent electrolytes were prepared by a mixture of propylene carbonate (PC), dimethyl carbonate (DMC), tetraethylammonium tetrafluoroborate ($TEABF_4$)s to evaluate the ionic properties of propylene carbonate (PC)/dimethyl carbonate (DMC) mixtures as solvents for a capacitor application, in view of improving the electrochemical performances. The bulk resistance and interfacial resistance of the mixture electrolytes were investigated using an AC impedance method. The morphology of carbon-based electrodes which were contained in different electrolytes was analyzed by scanning electron microscopy (SEM) method. From the experimental results, by increasing the FEC content, capacitance of electrodes was increased, and the interfacial resistance was decreased. In particular, by a content of 2 vol % FEC in 0.2 M $TEABF_4$ PC/DMC solvent, the electrolyte showed the superior capacitance. However, when FEC content exceeds 2 vol %, the capacitance was decreased and the interfacial resistance was increased.

• Korean Journal of Food Science and Technology
• /
• v.24 no.5
• /
• pp.504-510
• /
• 1992

Several single or mixed water-miscible organic solvent systems were investigated to develop the most effective solvent system for enzymatic synthesis of N-benzoylaspartame(BzAPM). The BzAPM was prepared by immobilized thermolysin with using N-benzoyl-L-aspartic acid(Bz-Asp) and L-phenylalanine methyl ester(PheOMe). The solubilities of BzAPM and L-phenylalanine were highest in 4.5% methanol(1.89 and 1.79%, respectively) among the solvents system investigated while a mixed solvent system of 25% dimethyl sulfoxide(DMSO) and 20% polyethylene glycol(PEG) 200 showed relatively high values. The synthetic activity of BzAPM as well as initial reaction rate were found to be high in 45% methanol, 45% DMSO and a mixed solvent of 25% DMSO and 20% PEM 200. The imobilized thermolysin was most stable in 25% DMSO and 20% PEG 200 during storage at $40^{\circ}C$ for 42 days. PheOMe in the same solvent system was also found fairly stable against non-enzymatic decomposition at $40^{\circ}C$. Based on the synthetic efficiency and stability, the solvent system containing 25% DMSO and 20% PEG 200 was selected to be appropriate for the enzymatic synthesis of BzAPM.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.3 no.2
• /
• pp.177-187
• /
• 1993

The exposure levels of mixed organic solvents for 66 exposed workers in six paint manufacturing plants were evaluated. In 66 exposed workers and 30 control subjects, we also determined the concentrations of toluene and xylene metabolites, hippuric acid, ($o^-$, $m^-$, and $p^-$)methylhippuric acid. The results were as follow ; 1. Seven organic compounds, which on averge accounted for approximately 90% of the identified mass in each painting plants air samples, were selected for quantification : methyl ethyl ketone, ethyl acetate, methyl isobutyl ketone, toluene, butyl acetate, ethyl benzene, ($o^-$, $m^-$, $p^-$)xylene. 2. The average mixed organic solvent exposure levels in 66 points with workplce were 3.8ppm of MEK, 12.2ppm of ethyl acetate, 4.0ppm of MIBK, 28.7ppm of toluene, 3.8ppm of butyl acetate, 10.2ppm of ethyl benzene, 14.6ppm of xylene, respectively. 3. For the total 66 points with workplace, the rate of them of which mixed solvents in air was exceeded th TLV of 1.0 were obtained for 23%(15/66 point). 4. The concentrations of hippuric acid in urine of exposed group and control were $0.94{\pm}0.65g/g$ of creatinine, $0.16{\pm}0.11g/g$ of creatinine, respectively. 5. There was a linear correlation between the end shift hippuric acid acid levels in urine and exposed toluene in air : y=0.02079X+494.2, r=0.6488, n=55 y:hippuric acid in urine(mg/g of creatinine), x:toluene levels in air(ppb) Toluene levels of 100ppm in air have been caculated to hippuric acid of 2.57g/g of creatinine in urine. 6. There was a linear correlation between the end shift methylhippuric acid acid levels in urine and exposed xylene in air : y=0.01664X+31.6, r=0.7264, n=55 y:methylhippuric acid in urine(mg/g of crea.), x:xylene levels in air(ppb) Xylene levels of 100ppm in air have been caculated to methylhippuric acid of 1.69g/g of creatinine in urine.

• Journal of Environmental Science International
• /
• v.18 no.3
• /
• pp.345-353
• /
• 2009

The purpose of this study is to examine the health of beauty salon workers through the utilization of questionnaires concerning the extent of exposure to organic solvents found in the air of some beauty salons and any resultant symptoms in employees. The subjects were 36 employees from 10 beauty salons who agreed to participate in this study. The degree of exposure to organic solvents in the air of beauty salons was measured from September 1, 2008 to September 30, 2008. A survey of symptoms that occurred due to exposure to these solvents was also performed. The results were as follows: questionnaires were collected and analyzed from a total of 36 subjects. Of these, 28(77.8%) were female and 8(22.2%) were male. The mean age was 29.08. The mean working period was 7.13 years. Sixteen subjects attended programs at universities while 11 went to beauty schools for vocational education. When testing the concentration of organic solvents in the air of beauty salons, the highest value found was Isopropyl alcohol 511.85 ppb followed by butyl acetate, toluene, acetone, xylene, ethyl benzene, styrene, and chlorobenzene. A logistic regression analysis was performed as follows: the point of each factor was the dependent variable while sex, age, drinking, smoking, educational level, work experience, hairdresser's license, and organic solvents were the independent variables. Statistically significant difference (p<0.05) was shown in the hairdresser's license among Factor 1 and in Xylene among Factor 2; however, difference was not shown in the other variables.

• Journal of Applied Biological Chemistry
• /
• v.57 no.3
• /
• pp.197-203
• /
• 2014

Various parameters such as solvent selection, concentration, solid/liquid ratio, soaking time, temperature, stationary, shaking conditions, and repeated extractions were investigated in order to determine the optimum extraction conditions of ${\beta}$-glucosidase from bagasse fermented by mixed culture of Aspergillus niger NRC 7A and Aspergillus oryzae NRRL 447. Among various solvents tested, non ionic detergents gave the best results than the inorganic or organic salt solutions and distilled water. The optimum conditions for extraction of ${\beta}$-glucosidase were 30 min soaking time at $40^{\circ}C$ under shaking condition at 150 rpm, with solid/liquid ratio 1:15 (w/v), which yielded $2882.74{\pm}95.52U/g$ fermented culture (g fc) of enzyme activity. With repeated washes under the above optimum conditions, the results showed that enzyme extracted in the $1^{st}$ and $2^{nd}$ washes represents about 90% of the total activity.

• Textile Coloration and Finishing
• /
• v.6 no.4
• /
• pp.17-26
• /
• 1994

Poly(ethylene terephthalate)(PET) filaments were treated in binary mixtures of organic solvents such as benzyl alcohol/perchloroethylene(BA/PER), benzyl alcohol/trichloroethylene(BA/TRI), benzyl alcohol/ethylene chloride(BA/EC), methanol/perchloroethylene (ME/PER), and methanol/trichloroethylene(ME/TRI). From the equilibrium swelling of PET, total and partial isotherms of PET for sorption of solvent mixtures and isotherms for distribution of the components between the phases were taken. Also the shrinkage and the crystallinity of PET treated with binary mixtures were investigated. The results obtained were summerized as follows: 1. All isotherms for distribution of the components between the phase deviated from the diagonal in system of PET-binary mixtures. Especially in the binary mixtures of ME/PER or ME/TRI, selectivo sorption of chlorinated hydrocarbon PER and TRI by PET occured. 2. The shrinkage of PET treated in binary mixrures was increased to compare with single solvent-treated, but the composition of binary mixtures corresponding to maximum values of shrinkage was not always agreed with the composition of binary mixtures corresponding to maximum values of shrinkage was not always agreed with the composition of binary mixtures exhibiting of the maximum swelling of PET. 3. The crystallinity of PET treated in binary mixtures generally increased than that of single solvent-treated.

• 한국생물공학회:학술대회논문집
• /
• 2002.04a
• /
• pp.504-507
• /
• 2002

A separation/purification process for enzymatic sugar ester production was investigated The crude reaction mixture contained sugar ester and unreacted fatty acid in acetone. The reaction mixture was mixed with KOH/phosphate buffer. Hexane was then added to enhance phase separation. Three phases formed: a lower aqueous phase containing nothing of interest, a polar organic solvent middle phase that contained mostly fatty acid soaps, and a hexane-rich upper phase that contained mostly sugar ester. Distribution coefficient of each component was measured.

• Analytical Science and Technology
• /
• v.21 no.2
• /
• pp.117-122
• /
• 2008

Dual scintillator for simultaneous alpha- and beta-ray counting used by detection materials of a surface contamination monitor was developed. In this study, preparation method was not a heat melting method but a solvent method, by which the counting material was manufactured by dissolving the polymer materials with solvent. It was simplified the preparation process. Plastic scintillator for beta-ray counting was prepared by solidifying the casting solution mixed with organic scintillator, polymer, and solvent. ZnS(Ag) scintillator layer was prepared by screen printing the paste solution mixed with ZnS(Ag), paste, and solvent onto the plastic layer. The good counting ability for alpha- and beta-ray using the ZnS(Ag)/plastic dual scintillator prepared and possibility for the counting material of surface contamination monitor was confirmed.