• Ocean and Polar Research
• /
• 제23권2호
• /
• pp.161-172
• /
• 2001

A model-to-model comparison is attempted between Princeton Ocean Model (POM) and Miami Isopycnic Coordinate Ocean Model (MICOM) as a first step to extend our knowledge of models' performances in studying the East Sea circulation. The two models have fundamentally different numerical schemes and boundary conditions imposed on these models are not exactly the same each other. This study indicates that MICOM has a critical weak point in that it does not reproduce the shallow surface currents properly while it handles the thermohaline processes and associated movements of intermediate and deep waters efficiently. It is suggested that the mixed layer scheme needs to be modified so that it can match with inflow boundary conditions in order to reproduce the surface currents properly in MICOM. POM reproduces the surface current pattern better than MICOM, although the surface currents in POM appear to undergo the unrealistic seasonal variation and have exaggeratedly large vertical scale. These defects seem to arise during the process of adapting POM to the East Sea, and removing these defects is left as a future task.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 1999년도 유체기계 연구개발 발표회 논문집
• /
• pp.27-32
• /
• 1999

A numerical study based on the three-dimensional thin-layer Navier-Stokes solver is carried out to analyze the flowfield through a single stage transonic compressor. Explicit four-step Runge-Kutta scheme with spatially variable time step and implicit residual smoothing is used. The governing equations are discretized with exploit finite difference method. Mixed-out average method is used at the interface between rotor and stator. And, an artificial dissipation model is used to assure the stability of solution. The results with k-$\omega$ turbulence model were compared to the results with Baldwin-Lomax model, and physical phenomena of transonic compressor are presented. The two turbulence models give the results that show reasonably good agreements with experimental data.

• 소성∙가공
• /
• 제8권4호
• /
• pp.374-383
• /
• 1999

To determine the flow stress of semi-solid materials, a new combined method has been studied by experimental and analytic technique in the current approach. Using backward extrusion experiment and its numerical analysis, the characterization scheme of semi-solid materials according to the change of initial solid volume fraction has been proposed. Because that solid volume fraction is sensitive to temperature change, it is required to precisely control the temperature setting. Model materials can guarantee the establishment of material characterization technique from the noise due to temperature change. Thus, clay mixed with bonded abrasives was used for experiment and the change of initial solid fraction was copied out through the variation of mixing ratio. Upper bound method was adapted to increase in efficiency of the calculation in numerical analysis and new kinematically admissible velocity field was employed to improve the accuracy of numerical solution. It is thought that the material characterization scheme proposed in this study can be applied to not only semi-solid materials, but also other materials that is difficult to obtain the simple stress state.

• 한국수자원학회논문집
• /
• 제42권12호
• /
• pp.1053-1067
• /
• 2009

본 연구의 목적은 하도의 형상이 불규칙한 자연하천에서 2차원 흐름 특성을 해석하고 예측하기 위해 2차 요소를 이용한 정확하고 효과적인 상향가중 유한요소모형의 개발에 있다. 모형의 개발을 위해 선형 삼각형 요소, 선형 사각형 요소와 혼합요소를 적용하였고 2차 삼각형, 사각형 요소와 혼합요소를 적용하여 모형을 개발하였으며, 지배방정식의 수치적분식으로 Gauss Quadrature 방법을 사용하였다. 개발된 모형의 적용성 검증을 위해 하상융기가 있는 수로, U자형 수로 등에 모의를 실시하여 해석해 및 실측치와 비교 검토하였다. 모의 결과 2차 요소가 선형 요소에 비해 보다 정확한 해를 제공하는 것으로 판단되었으며 2차요소를 적용한 상용모형인 RMA-2 모형과 비교한 결과 본 연구 개발 모형이 보다 정확한 해를 나타내는 것을 확인할 수 있었다. 개발된 모형을 향후 자연하천에 적용할 경우 기존의 모형에 비해 향상된 결과를 얻을 수 있을 것으로 판단된다.

• 한국산학기술학회논문지
• /
• 제20권1호
• /
• pp.329-338
• /
• 2019

본 연구에서는 농산물 꾸러미 속성별 소비자선호 분석을 통해 사업 활성화 방안을 제시하고자 하였다. 꾸러미의 속성을 구성함에 있어서 상품묶음 방식과 배송 방식 및 가격으로 구분하여 설정하고, 선택실험법에 의해 각 속성의 수준변화에 대한 한계지불의사금액을 추정하였다. 계량적 분석을 수행함에 있어서 보다 효율적인 모형을 선택하기 위하여 잔차항에 대한 가정이 서로 다른 조건부로짓 모형, 이분산 극한치 모형, 다항프로빗 모형, 혼합로짓 모형 등 네 모형을 추정하였으며, 그 결과 상품묶음 방식과 배송 방식 및 가격에 대한 추정계수 값이 모두 통계적으로 유의한 것으로 나타났다. 로그우도 값의 크기를 기준으로 볼 때 이분산 극한치 모형이 자료에 가장 적합하는 것으로 나타났다. 이분산 극한치 모형의 추정계수를 활용한 한계지불의사금액은 상품묶음 방식을 고정형에서 선택형으로 변경 할 경우 1회당 7,096.6원, 배송방식 중 직접배송에 대한 소비자의 한계지불의사금액은 1회당 3,497.5원, 콜드체인 배송에 대한 한계지불의사금액은 1회당 4,035.2원으로 나타났다. 이러한 분석결과는 정부의 로컬푸드 활성화를 위한 정책수립에 기초자료로 활용될 수 있을 것이다.

• 대한산업공학회지
• /
• 제25권3호
• /
• pp.351-359
• /
• 1999

We present a new approach to the analysis of mobile cellular communication systems under the environment of mixed platforms adopting a guard channel scheme. We assume general cell residence time distributions according to platform-types. Our system model is based on a heterogeneous M/G/c loss system with customer-dependent guard channels, where heterogeneous customers with different service time distributions have different numbers of their own guard channels. We develop the general formula of steady state probabilities for the heterogeneous M/G/c loss system with customer-dependent guard channels. The mean channel occupancy times of new and handoff calls are rigorously derived under a general setting. Finally, our numerical results show that the blocking probability and the forced termination probability are sensitive to the cell residence time distributions.

• 제어로봇시스템학회논문지
• /
• 제4권4호
• /
• pp.458-463
• /
• 1998

This paper presents an autopilot design method for STT missiles using the intelligent control technique and multiple controllers. The mixed $H_2/H_{\infty}$ control technique is applied for each controller design and the control gains are implemented by using the genetic searching algorithm. To facilitate automatic switching of multiple controllers under different operating conditions, an error based switching scheme is also combined with the multiple controllers at a higher level, which constitutes a hierarchical intelligent control system. It is shown via computer simulation that the proposed autopilot outperforms the conventional one.

• 한국인터넷방송통신학회논문지
• /
• 제22권3호
• /
• pp.15-24
• /
• 2022

현재 교차로에서의 보행자 교통흐름이나 비동력차 교통흐름의 신호제어에 대한 연구는 비교적 적다. 교통 흐름 신호 제어의 최적화 방안을 연구하여 보행자, 비동력차, 자동차 등의 전체적인 교통 흐름을 조화롭게 통제할 수 있게 하는 것은 교차로의 정체 상황을 개선하는 데 중요한 의의가 있다. 교차로의 교통 최적화를 위해 본 논문은 채널화 최적화와 위상 설계의 두 가지 측면에서 출발하며, 교차로에서의 충돌점의 수를 공간적, 시간적 할당으로부터 각각 감소시킨다. 고전적인 신호 타이밍 방법을 이론적 기반으로하고, 교통 여행객의 안전과 시간 적 이익 보장을 목표로 교차로의 채널화 최적화 및 신호 제어 방안을 제안한다. 자동차, 비자동차, 보행자를 객체로 하는 교차로의 채널화 및 위상 설계방법에 대해 논의하고, 교차로의 채널화 최적화 개선 방안을 제안한다. 교차로 신호제어의 다목적 최적화 모델을 구축하였으며, NSGA-II 알고리즘을 기반으로 모델을 해결하였다.

• Nuclear Engineering and Technology
• /
• 제52권5호
• /
• pp.925-936
• /
• 2020

To ascertain the characteristics of pool sloshing behavior that might be encountered during a core disruptive accident of sodium-cooled fast reactors, in our earlier work several series of experiments were conducted under various scenarios including the condition with mono-sized solid particles. It is found that under the particle-bed condition, three typical flow regimes (namely the bubble-impulsion dominant regime, the transitional regime and the bed-inertia dominant regime) could be identified and a flow-regime model (base model) has been even successfully established to estimate the regime transition. In this study, aimed to further understand this behavior at more realistic particle-bed conditions, a series of simulated experiments is newly carried out using mixed-size particles. Through analyses, it is verified that for present scenario, by applying the area mean diameter, our previously-developed base model can provide the most appropriate predictive results among the various effective diameters. To predict the regime transition with a form of extension scheme, a correction factor which is based on the volume-mean diameter and the degree of convergence in particle-size distribution is suggested and validated. The conducted analyses in this work also indicate that under certain conditions, the potential separation between different particle components might exist during the sloshing process.

• 한국습지학회지
• /
• 제5권1호
• /
• pp.67-78
• /
• 2003

The unsteady 2D convection and diffusion equation is solved numerically for the real-time simulation of suspended load propagation. The streamlined upwind scheme efficiently reduces numerical oscillations due to the high Peclet number in the convection dominant flow. By using the mixed boundary condition to express the external source terms or externally induced suspended load as a function of time in the algorithm, the model is capable of handling not only continuous load cases but also non-continuous suspended load influx. The suspended load transport modelwas verified using a case study for which an analytical exact solution is available and was applied to the real-time simulation of a suspended load influx case on the Mississippi River. The model algorithm can provide a framework upon which water quality as well as contaminant transport models can be built.