• 제목/요약/키워드: Mixed flow cycle

검색결과 31건 처리시간 0.028초

Vortex-induced vibration of a long flexible cylinder in uniform cross-flow

  • Ji, Chunning;Peng, Ziteng;Alam, Md. Mahbub;Chen, Weilin;Xu, Dong
    • Wind and Structures
    • /
    • 제26권5호
    • /
    • pp.267-277
    • /
    • 2018
  • Numerical simulations are performed of a long flexible cylinder undergoing vortex-induced vibration at a Reynolds number of 500. The cylinder is pinned at both ends, having an aspect ratio of 100 (cylinder length to cylinder diameter) and a mass ratio of 4.2 (structural mass to displaced fluid mass). Temporal and spatial information on the cross-flow (CF) and in-line (IL) vibrations is extracted. High modal vibrations up to the $6^{th}$ in the CF direction and the $11^{th}$ in the IL direction are observed. Both the CF and IL vibrations feature a multi-mode mixed pattern. Mode competition is observed. The $2^{nd}$ mode with a low frequency dominates the IL vibration and its existence is attributed to a wave group propagating back and forth along the span. Distributions of fluid force coefficients are correlated to those of the CF and IL vibrations along the span. Histograms of the x'-y motion phase difference are evaluated from the total simulation time and a complete vibration cycle representing the standing or travelling wave pattern. Correlations between the phase difference and the vibrations are discussed. Vortex structures behind the cylinder show an interwoven near-wake pattern when the standing wave pattern dominates, but an oblique near-wake pattern when the travelling wave pattern prevails.

Prismatic-core advanced high temperature reactor and thermal energy storage coupled system - A preliminary design

  • Alameri, Saeed A.;King, Jeffrey C.;Alkaabi, Ahmed K.;Addad, Yacine
    • Nuclear Engineering and Technology
    • /
    • 제52권2호
    • /
    • pp.248-257
    • /
    • 2020
  • This study presents an initial design for a novel system consisting in a coupled nuclear reactor and a phase change material-based thermal energy storage (TES) component, which acts as a buffer and regulator of heat transfer between the primary and secondary loops. The goal of this concept is to enhance the capacity factor of nuclear power plants (NPPs) in the case of high integration of renewable energy sources into the electric grid. Hence, this system could support in elevating the economics of NPPs in current competitive markets, especially with subsidized solar and wind energy sources, and relatively low oil and gas prices. Furthermore, utilizing a prismatic-core advanced high temperature reactor (PAHTR) cooled by a molten salt with a high melting point, have the potential in increasing the system efficiency due to its high operating temperature, and providing the baseline requirements for coupling other process heat applications. The present research studies the neutronics and thermal hydraulics (TH) of the PAHTR as well as TH calculations for the TES which consists of 300 blocks with a total heat storage capacity of 150 MWd. SERPENT Monte Carlo and MCNP5 codes carried out the neutronics analysis of the PAHTR which is sized to have a 5-year refueling cycle and rated power of 300 MWth. The PAHTR has 10 metric tons of heavy metal with 19.75 wt% enriched UO2 TRISO fuel, a hot clean excess reactivity and shutdown margin of $33.70 and -$115.68; respectively, negative temperature feedback coefficients, and an axial flux peaking factor of 1.68. Star-CCM + code predicted the correct convective heat transfer coefficient variations for both the reactor and the storage. TH analysis results show that the flow in the primary loop (in the reactor and TES) remains in the developing mixed convection regime while it reaches a fully developed flow in the secondary loop.

Firing Test of Core Engine for Pre-cooled Turbojet Engine

  • Taguchi, Hideyuki;Sato, Tetsuya;Kobayashi, Hiroaiki;Kojima, Takayuki;Fukiba, Katsuyoshi;Masaki, Daisaku;Okai, Keiichi;Fujita, Kazuhisa;Hongoh, Motoyuki;Sawai, Shujiro
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2008년 영문 학술대회
    • /
    • pp.115-121
    • /
    • 2008
  • A core engine for pre-cooled turbojet engines is designed and its component performances are examined both by CFD analyses and experiments. The engine is designed for a flight demonstration of precooled turbojet engine cycle. The engine uses gas hydrogen as fuel. The external boundary including measurement devices is set within $23cm{\times}23cm$ of rectangular cross section, in order to install the engine downstream of the air intake. The rotation speed is 80000 rpm at design point. Mixed flow compressor is selected to attain high pressure ratio and small diameter by single stage. Reverse type main combustor is selected to reduce the engine diameter and the rotating shaft length. The temperature at main combustor is determined by the temperature limit of non-cooled turbine. High loading turbine is designed to attain high pressure ratio by single stage. The firing test of the core engine is conducted using components of small pre-cooled turbojet engine. Gas hydrogen is injected into the main burner and hot gas is generated to drive the turbine. Air flow rate of the compressor can be modulated by a variable geometry exhaust nozzle, which is connected downstream of the core engine. As a result, 75% rotation speed is attained without hazardous vibration and heat damage. Aerodynamic performances of both compressor and turbine are obtained and evaluated independently.

  • PDF

설비공학 분야의 최근 연구 동향: 2011년 학회지 논문에 대한 종합적 고찰 (Recent Progress in Air-Conditioning and Refrigeration Research: A Review of Papers Published in the Korean Journal of Air-Conditioning and Refrigeration Engineering in 2011)

  • 한화택;이대영;김서영;최종민;백용규;김수민
    • 설비공학논문집
    • /
    • 제24권6호
    • /
    • pp.521-537
    • /
    • 2012
  • This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2011. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) Research trends of thermal and fluid engineering have been surveyed as groups of fluid machinery and fluid flow, thermodynamic cycle, and new and renewable energy. Various topics were presented in the field of fluid machinery and fluid flow. Research issues mainly focused on the rankine cycle in the field of thermodynamic cycle. In the new and renewable energy area, researches were presented on geothermal energy, fuel cell, biogas, reformer, solar water heating system, and metane hydration. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer, nanofluids and industrial heat exchangers. Researches on heat transfer characteristics included heat transfer above liquid helium surface in a cryostat, methane hydrate formation, heat and mass transfer in a liquid desiccant dehumidifier, thermoelectric air-cooling system, heat transfer in multiple slot impinging jet, and heat transfer enhancement by protrusion-in-dimples. In the area of pool boiling and condensing heat transfer, researches on pool boiling of water in low-fin and turbo-B surfaces, pool boiling of R245a, convective boiling two-phase flow in trapezoidal microchannels, condensing of FC-72 on pin-finned surfaces, and natural circulation vertical evaporator were actively performed. In the area of nanofluids, thermal characteristics of heat pipes using water-based MWCNT nanofluids and the thermal conductivity and viscosity were measured. In the area of industrial heat exchangers, researches on fin-tube heat exchangers for waste gas heat recovery and Chevron type plate heat exchanger were implemented. (3) Refrigeration systems with alternative refrigerants such as $CO_2$, hydrocarbons, and mixed refrigerants were studied. Heating performance improvement of heat pump systems were tried applying supplementary components such as a refrigerant heater or a solar collector. The effects of frost growth were studied on the operation characteristic of refrigeration systems and the energy performance of various defrost methods were evaluated. The current situation of the domestic cold storage facilities was analyzed and the future demand was predicted. (4) In building mechanical system fields, a variety of studies were conducted to achieve effective consumption of heat and maximize efficiency of heat in buildings. Various researches were performed to maximize performance of mechanical devices and optimize the operation of HVAC systems. (5) In the fields of architectural environment and energy, diverse purposes of studies were conducted such as indoor environment, building energy, and renewable energy. In particular, renewable energy and building energy-related researches have mainly been studied as reflecting the global interests. In addition, various researches have been performed for reducing cooling load in a building using spot exhaust air, natural ventilation and energy efficiency systems.

석탄가스화 용융슬래그를 잔골재로 치환한 콘크리트의 공학적 특성 (Engineering Properties of Concrete using of Coal Gasification Slag as the Fine Aggregates)

  • 박경택;한민철;현승용
    • 한국건설순환자원학회논문집
    • /
    • 제7권3호
    • /
    • pp.194-201
    • /
    • 2019
  • 본 연구는 CGS를 콘크리트용 잔골재로서 활용성을 검토하기 위하여 CGS 치환율에 따른 콘크리트의 특성을 분석하였다. 실험결과, 슬럼프 및 슬럼프 플로우는 CSa 및 MS 모두 CGS 치환율이 증가할수록 증가하였으며, 공기량은 반대로 감소하였다. 재료분리평가정수(EISN)는 CSa를 사용한 경우 CGS 25%, MS를 사용한 경우는 CGS 50~75%에서 양호한 것으로 나타났다. 압축강도는 CSa를 사용한 경우 CGS 치환율이 증가할수록 저하하였는데, CGS 25%에서 저하폭이 가장 작았다. 단, MS를 사용한 경우는 포물선 경향으로 CGS 50%에서 최대치를 나타내었다. 상호비교로서 잔골재 종류에 따른 압축강도는 MS보다 CSa가 약 8% 높게 나타났고, CGS 사용 유무에 따라서는 CGS를 사용하였을 때 낮은 강도 영역에서는 작게 나타났지만, 높은 강도 영역에서 크게 나타났다. CGS 치환율에 따른 콘크리트의 품질을 종합적으로 검토한 결과, CGS를 잔골재에 25~50% 전후로 혼합하여 사용한다면 유동성 및 강도 증진에 긍정적으로 기여할 수 있을 것으로 판단되었다.

마이크로버블을 이용한 분리막 파울링 저감방법 (Method of Reducing Separation Membrane Fouling Using Microbubbles)

  • 구경환;김영희
    • 청정기술
    • /
    • 제29권1호
    • /
    • pp.31-38
    • /
    • 2023
  • 수자원 오염 그리고 기후변화로 인한 극한의 기상현상으로 물 부족 현상 심화로 공공하수처리 시설의 폐수 배출시 총유기탄 소량(TOC) 기준이 시행되고, 대체 수자원 확보를 위해 하수처리수 재이용에 연구와 관심이 증가하고 있다. 현장에서는 하폐수고도처리로 MBR(membrane bio-reactor)공법을 보편적으로 사용하며, 유기 및 무기 이온 제거 그리고 화학물질의 사용 및 배출이 없다는 친환경적인 장점이 있다. 하지만, 분리막을 사용한 MBR공정은 고농도 활성슬러지 부유물질(mixed liquor suspended solid, MLSS)로 인한 분리막의 막오염(파울링) 현상으로 잦은 막세정 비용 발생의 문제가 있다. 본 연구에서는 분리막 운영시 최대 단점이었던 분리막의 차압 상승, 통수량 저하, 파울링 현상을 개선하고자 i) 공정 개선과 ii) 마이크로버블의 세정 효율을 평가하였다. 기존 MBR공법에 원수가 유입되는 호기조와 MBR조 사이에 침전조를 설치하여 침전조를 거친 상등수가 유입된 분리막조 내부로 마이크로버블을 주입하였다. 마이크로버블은 5개월간 15일 간격으로 마이크로버블 발생장치를 작동(ON), 미작동(OFF)하여 방류수 시료(4L)를 채취 후 TOC를 측정하였다. 침전조를 거친 상등수가 분리막조로 유입하여 원수 MLSS의 95%이상이 제거되어 생물막 등의 오염으로부터 막의 파울링 현상을 1차 방지할 수 있었다. 침전조를 거친 상등수에 마이크로버블의 적용으로 분리막의 차압은 1.6 ~ 2.3배 감소 및 통수량은 최대 1.4배 증가하였다. 마이크로버블의 적용(ON)으로 TOC 제거율은 58% 이상 증가했다. 호기조와 분리막조를 분리 운영함에 따라 침지식 분리막의 파울링 현상을 저감할 수 있고, 추가로 마이크로버블을 적용하여 분리막의 차압, 통수량과 막오염(파울링)이 개선으로 효율적인 고도처리공법을 제시했다.

준분포형 모형을 이용한 농업용 저수지가 안성천 유역의 유출모의에 미치는 영향 평가 (Impact Assessment of Agricultural Reservoir on Streamflow Simulation Using Semi-distributed Hydrologic Model)

  • 김보경;김병식;권현한
    • 대한토목학회논문집
    • /
    • 제29권1B호
    • /
    • pp.11-22
    • /
    • 2009
  • 장기유출 해석은 저수지와 댐의 용량 결정, 가뭄대책 수립, 하천유지유량 결정 등의 이수계획과 용수공급을 위한 댐 및 저수지의 물 관리, 수리권의 허가 및 조정, 용수 분쟁 조정 등의 하천 물 관리 실무와 하천, 호소의 수질예측 등에도 필수적이다. 이를 위해 수문학자들은 수자원관리를 목적으로 강우-유출 모형을 가장 널리 이용하고 있으나 실제 유역 내에 위치하고 있는 댐과 저수지 등과 같은 인위적 저류시설물에 대한 고려가 미흡한 실정이다. 각 저류시설물의 수용 및 방류 능력은 국부적으로는 저수지 하류에, 광역적으로는 유역 전체에 상당한 영향을 미칠 수 있으며 이러한 관점에서 볼 때 강우-유출 모형을 이용하여 유출해석 시 유역 내 포함된 저수지나 댐과 같은 시설물을 고려하여 모형을 구성하는 것이 타당하다. 본 연구에서는 과거 집중호우 등으로 홍수피해를 경험한 바가 있으며 농업용 저수지가 다수 위치한 안성천 유역을 대상으로 농업용 저수지가 유출해석에 미치는 영향을 분석하였다. 이를 위해 본 연구에서는 현재 홍수조절 능력에 대한 논란이 일고 있는 안성천 유역의 농업용 저수지를 고려하여 준 분포형 강우-유출 모형인 SLURP 모형을 구성하고 농업용 저수지의 저류 효과에 따른 하류 지역에 대한 영향성을 검토하였으며, 유출해석 시 모형 내 저수지 반영 여부에 따른 차이에 대하여 비교 분석하였다. 모형 내 저수지를 고려하여 모의한 결과, 강우가 집중되지 않는 봄과 가을철에는 저류효과가 있는 것으로 나타났으나 강우가 매우 집중되는 시기에는 하류로의 유출이 더 크게 모의되어 저수지를 고려하지 않은 경우와 차이를 보였으며, 유황분석을 통해 저수지 유무에 따른 유량변동이 풍수량(95일)과 갈수량(355일)에서 특히 크게 분석되는 결과를 확인 할 수 있었다. 단, 본 연구에서 분석하고자 하는 기흥, 이동, 고삼과 금광 저수지의 자료는 안성천홍수예보시스템 개선(건설교통부, 2007b)에서 조사된 내용에 의거하여 각 저수지별 최대방류량을 입력 자료로 활용하였으므로 실제 저수지 운영에 따른 유출과 유황변동과는 차이가 있을 수 있음을 미리 밝히는 바이다.

유해폐기물 생애 전주기 흐름 기반 정보 관리 전략 (An Information Management Strategy Over Entire Life Cycles of Hazardous Waste Streams)

  • 이상훈;김정은
    • 청정기술
    • /
    • 제26권3호
    • /
    • pp.228-236
    • /
    • 2020
  • 우리나라는 제조업 중심의 경제구조상 각종 유해폐기물이 발생하고 있으나 매립후보지가 적고 소각처리의 경우 미세먼지의 발생에 대한 우려가 커서 전통적인 폐기물 처리가 쉽지 않다. 더구나 최근에는 개발도상국의 유해폐기물 수입규제, 배달문화의 보편화와 보건위기사태까지 겹쳐 폐기물 수거 및 적체 문제가 심화되고 있다. 본 연구에서는 특히 최근 폐기물 국제 규제 관련 추세에 맞춘 국내 폐기물 정보관리 전략을 제시하려 하였다. 그 내용은 (1) 국내 유해폐기물 분류 코드와 바젤협약 등 국제적 코드와의 정합성을 제고하려는 노력을 지속해야 하며 (2) 폐전자제품내 희토류 등 저함량 성분의 혼합 유해성을 고려해야 하고 (3) 유해폐기물 전주기 위해성을 기반으로 하는 관리가 수행되어야 한다. 또한 (4) 올바로시스템, 화학물질배출·이동량 정보공개시스템 및 폐기물 수출입 자료 등을 서로 연동하여 폐기물 상세 흐름 정보를 구축하고 (5) 센서와 지리정보 시스템 등을 활용하여 폐기물 흐름의 감시와 불법오염지역의 예측이 필요하다. 마지막으로 (6) 청정기술과 전과정평가 등으로 처리/재활용의 최적대안을 선정/수행하는 것이 바람직하다.

석탄가스의 초정밀 정제를 위한 변형된 활성탄의 흡착특성 연구 (The Adsorption of COS with a Modified-Activated Carbon for Ultra-Cleanup of Coal Gas)

  • 이유진;박노국;이태진
    • 청정기술
    • /
    • 제13권4호
    • /
    • pp.266-273
    • /
    • 2007
  • 본 연구에서는 석탄가스화 복합발전시스템용 고온건식탈황공정에 포함된 직접황회수공정의 $SO_2$ 촉매환원 반응에서 발생되는 COS의 효과적인 제거를 위한 활성탄계 흡착제의 흡착특성이 연구되었다. $SO_2$의 촉매적 환원을 위하여 전이금속 담지촉매와 복합금속산화물 촉매가 사용되었으며, 이들 촉매의 반응기구에 따라 COS 생성과정과 반응온도에 따른 유출량이 조사되었다. 생성된 저농도의 COS를 효과적으로 제거하기 위하여 상용활성탄과 활성탄의 COS흡착특성을 개선하기 위하여 알칼리금속 수용액(KOH)으로 담지시킨 활성탄이 이용되었다. TGA를 이용하여 온도에 따른 COS 흡착량과 흡착속도를 알 수 있었고, GC-PFPD가 장착된 고정층 흡착시스템을 이용하여 COS 흡착실험을 수행한 결과, 높은 BET 표면적을 지니는 KOH로 처리된 활성탄의 COS 파과시간이 상용활성탄에 비해 장시간 유지되었다. 이와 같은 결과로부터 활성탄 흡착시스템으로 $SO_2$ 환원으로부터 생성되는 COS를 효과적으로 제거할 수 있으며, 알칼리성 금속을 담지할 경우 흡착특성이 향상됨을 확인할 수 있었다.

  • PDF

석탄가스화 용융슬래그를 혼합잔골재로 사용한 콘크리트의 기초적 특성 및 내구성 분석 (Analysis of Fundamental Properties and Durability of Concrete Using Coal Gasification Slag as a Combined Aggregate)

  • 최일경;한민철
    • 한국건축시공학회지
    • /
    • 제20권4호
    • /
    • pp.331-338
    • /
    • 2020
  • 본 연구는 CGS를 콘크리트용 혼합골재로서 활용성을 검토하기 위하여 양호한 입도분포의 부순잔골재(CSa) 및 미립자인 해사와 굵은 입자의 부순잔골재를 혼합한 혼합골재(MS)에 CGS의 치환율 변화에 따른 콘크리트의 기초적 특성 및 내구성을 분석하였다. 실험결과, 슬럼프 및 슬럼프 플로는 CSa 및 MS 모두 CGS 치환율이 증가할수록 증가하였으며, 공기량은 반대로 감소하였다. 압축강도는 CSa를 사용한 경우 CGS 치환율이 증가할수록 저하하였지만, MS를 사용한 경우는 CGS 50 %에서 최대치를 나타내었다. 콘크리트 내구성을 검토한 결과로, 건조수축 및 탄산화 깊이측정의 경우는 CGS 치환율에 따라 양호한 성능을 나타내었다. 하지만, 내동해성에서는 전반적으로 CGS 치환율이 증가할수록 감소하는 것으로 나타났다. 따라서, CGS를 치환 사용하는 혼합잔골재 콘크리트의 경우는 공기량 감소를 보완할 수 있도록 AE제 추가 투입 등의 대책을 수립한다면, 큰 문제 없을 것으로 판단된다.