• 한국염색가공학회지
• /
• 제28권4호
• /
• pp.280-289
• /
• 2016

Silica microgel was prepared by sol-gel process and then functional groups, epoxy group and ethoxy group, were introduced on the particle by coupling treatment with 3-glysidoxypropyltrimethoxysilane. The functional silica microgel(functional SiGel) formation was identified using FT-IR spectrometry. Phase stability for DMF solution of functional SiGel, PU resin and pigment was evaluated by Turbiscan Lab. And physical properties of artificial suede including hand values, morphology and dyeing fastness were investigated. The mean particle size and the specific surface area of the functional SiGel were $0.77{\mu}m$ and $380m^2/g$. Mixture containing the functional SiGel, PU resin and pigment was more stable than the functional SiGel-free mixed solution. Artificial suede prepared by the functional SiGel had appearance and feeling close to natural suede. The migration fastness, the solvent wicking fastness and rubbing fastness of the artificial suede were enhanced to 4~5 grades, 4~5 grades and 3~4 grades, respectively.

• 한국의류학회지
• /
• 제37권3호
• /
• pp.413-423
• /
• 2013

Chlorophyll is an abundant pigment found in all green plants, algae, and cyanobacteria. This study uses methanol, acetone and water to extract spinach and mate powders in order to examine the possibility of dyeing animal fibers with chlorophyll without chemical alteration. It was shown that methanol extracts of spinach and mate powders can be effectively used to dye wool and silk fabrics if the extract is mixed with water by methanol:water 65:35 v/v. Compared to methanol extract, the acetone extract showed lower chlorophyll yield and lower dye uptake. Water was not an appropriate solvent for chlorophyll extraction and dyeing. Spinach powder showed a higher dye uptake than mate powder due to the higher chlorophyll content than mate powder. It is possible that the chlorophyll dyeing of wool and silk fabrics is due to the hydrogen bonding between the hydroxy amino acids in fiber and the carbonyl groups of chlorophyll. These carbonyl groups are on the heterocyclic ring and the methyl and ethyl side chains of chlorophyll.

• KSBB Journal
• /
• 제18권6호
• /
• pp.479-484
• /
• 2003

염색폐수에 포함된 PVA를 생물학적으로 제거하고자 34 종의 PVA 분해용 균주를 염색폐수 및 슬러지로부터 분리하였다. 이 중 PVA 분해 시험을 거쳐 2 종의 균주를 최종분리하여 동정하여 Microbacterium barkeri LCa와 Paenibacillus amylolyticus LCb로 명명하였다. 최종분리균의 최적성장조건 및 최대분해조건을 규명해보았는데, 온도는 3$0^{\circ}C$, pH는 7, 탄소원은 starch, 그리고 질소원은 peptone으로 판명되었으며, 최적조건 하에서의 PVA 분해율은 89%를 보였다. 또한, 본 연구에서 분리한 균주는 PVA 중합도의 영향 없이 높은 분해율을 유지하는 것으로 판명되었다.

• 폴리머
• /
• 제35권5호
• /
• pp.458-466
• /
• 2011

초임계 탄산가스/유기용매 혼합계 상에서 이색성 염료인 C. I. direct black 22(DB22)로 고검화도의 폴리(비닐 알코올)(PVA)을 염색하여 내구성이 강한 편광필름을 제조하였다. 특히, 초임계 탄산가스 상으로 이색성 염료를 녹이기 위한 분산제로 에틸렌 글리콜과 디메틸 설폭사이드의 무게비=4 : 6의 혼합용매계를 사용하였을 때 염색 압력을 200 bar까지 낮출 수 있었다. 초임계 유체계의 사용으로, 최대 염색은 연신 전 투과도로 1% 미만까지, 폐수 발생량은 1/10 수준까지, 감소가 가능하였고, 이와 같이 염색된 PVA 필름을 500% 연신한 후 측정된 편광효율은 94%, 평균 투과도(single piece transmittance)는 30%로 각각 얻어졌으며, 또한 이색성 염료로서의 DB22의 한계 및 개선 방안 등도 검토하였다.

• 폴리머
• /
• 제33권2호
• /
• pp.175-182
• /
• 2009

Isophorone diisocyanate(IPDI)를 이소시아네이트 화합물로 사용하고, poly (tetramethylene glycol)(PTMG)과 polycarbonate diol(PCD)을 혼합한 폴리올을 사용하여 선형 수분산성 폴리우레탄(WPU)을 합성하고, 이들을 필름으로 캐스팅하여 폴리카보네이트(PC) 함량 변화에 따른 기계적 특성과 염색성, 내알칼리성 변화를 분석하였다. WPU 필름에 PC 성분의 함량이 증가함에 따라 인장강도는 증가하고 파단신도는 감소하였으며, 분산염료에 대한 겉보기 염착량이 감소하였지만, 내알칼리성은 영향이 없었다. 합성한 WPU 용액을 PET 섬유 인공피혁용 함침가공제로 사용한 결과, PTMG 만을 폴리올로 사용한 WPU 수지로 처리한 경우보다 인공괴혁의 마찰견뢰도, 일광견뢰도, 내세탁성 등 염색견뢰도를 크게 증가시킬 수 있었다.

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2003년도 춘계학술대회 논문집
• /
• pp.37-42
• /
• 2003

Although fibre reactive dyes for wool were developed before those for cellulosic fibres, there are still limited ranges of fibre reactive dyes available for wool compared to those for cellulosic fbres. Since Fujioka and Abeta introduced the first mixed bifunctional reactive system in the early 1980s for cellulosic fibres, there has been some works on cotton and on silk. (omitted)

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2012년도 제46차 학술발표회
• /
• pp.115-115
• /
• 2012

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2009년도 제41차 학술발표회
• /
• pp.145-146
• /
• 2009

This is studies about development of light nylon fabric and development of low denier NCD/nylon6 filament using mixed spinning technique of nylon6 and NCD(Nylon Cation Dyeable) polymer. We study how the manufactured fabrics effect on downproof & windproof properties according to conditions of low denier N/NCD filament yarn, fabrication, and dyeing and finishing.

• 한국염색가공학회지
• /
• 제15권6호
• /
• pp.55-62
• /
• 2003

Wool fabrics were dyed with the aqueous solution of C. I. Red Acid 114 mixed with methanol dissolving three kinds of barely water soluble ketones, acetophenone, 2-pentanone, and 3-pentanone. The steric hinderance and the orientation of the bigger hydrophobic part of the solvated dye molecules to the fiber slowed down the dying rate, however, loosening the wool molecule, say a little swelling, disaggeregating the dye molecules, and attaining the higher dye concentration on the fiber surface by the added solvents increased the amount of dye on the fabric. The higher concentration or/and the higher dyeing temperature helped loosen fiber molecules and made it easier for the solvated dye molecules to penetrate into the inside of the fiber. Acetophenone, the most influential solvent used, showed that the ability to loosen fiber molecules was the most important of all the three positive solvent actions mentioned above. The considered mechanism provided before reflected the fact that the dye uptake on the fabric dyed with the solvents included, except for 0.034M and 0.051M of acetophenone, was even lower than that without any solvents at $50^\circ{C}$, but all the solvents added to the dye bath increased the dye uptake on the fiber at $70^\circ{C}$.

• 한국의류학회지
• /
• 제37권8호
• /
• pp.1107-1116
• /
• 2013

This study examined the use of cutinase and lipase to process cotton/polyester blend fabric. Optimum treatment conditions for cutinase and lipase were investigated for cotton/polyester blend fabric. The properties of enzyme-treated fabrics were evaluated and compared in optimal treatment conditions. In addition, the possibility to provide an enzymatic finishing on blend fabrics using mixed enzymes in a two-step process were studied. The weight loss of cotton/polyester blend fabrics with Triton X-100 was 0.8% and the dyeing property of blend fabrics with calcium chloride increased by a factor of 1.2. The use of two enzymes in combination with cutinase and lipase in the presence of auxiliaries resulted in a cotton/polyester blend fabric weight loss of 0.8%. In addition, the dyeing properties of cotton/polyester blend fabrics improved by a factor of 1.5 and the moisture regain of cotton/polyester blend fabrics improved by a factor of 1.16. However, no marked loss was observed in tensile strength. The surface morphology of cotton/polyester blend fabrics is modified through a two-enzyme treatment. The treatment of cotton/polyester blend fabrics with cutinase and lipase maintains cotton strength and improves the moisture regain of polyester fabrics.