• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.141-142
• /
• 2023

In this study, the strength development characteristics of calcium silicate cement mixed mortar according to carbonation hardening conditions were evaluated. As a result of measuring the compressive strength, the strength increased according to the carbonation hardening time, and the strength increase rate was higher for the specimen with a CO₂ concentration of 20%.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.261-262
• /
• 2023

Nanomaterials are being actively studied in the fields of cement and concrete. However, research on other nanomaterials is insufficient because much of the carbon-based nanomaterials are made up of carbon nanotubes. Therefore, in this study, carbon-based water-soluble graphene oxide was mixed into mortar according to the cement replacement rate to conduct a characteristic evaluation. As a result, as the substitution rate of graphene oxide increased, workability decreased, and there was no effect of enhancing compressive strength. In addition, it was confirmed that the compressive strength decreased due to a large amount of air bubbles when the mixture was mixed for the purpose of improving workability.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2009년도 춘계 학술논문 발표대회 학계
• /
• pp.93-96
• /
• 2009

This study is to examine a change of quality and a material performance of fiber reinforced cement composite for mass production. It is necessary to make Strain-hardening cementitious composite(SHCC) by batcher plant for ready-mixed concrete and use the performance of SHCC which made based on laboratory level. This study makes a comparative performance of press and mechanics that is the property of Strain-hardening by direct tension. In case of making by batcher plant. This experiment has demonstrated that even if it takes long after being mixed small and compared with the one which made based on laboratory, it has a tendency to be dissatisfied with fiver's dispersion and lower its performance of Strain-hardening. The reason why the material performance of SHCC for mass production went down is through SHCC that mixed sometimes matrix's viscosity and fiber's dispersion.

• Elastomers and Composites
• /
• 제35권3호
• /
• pp.196-204
• /
• 2000

방수제로 사용하는 EVA 에멀젼 수지에 라텍스 형태의 아크릴 수지, 에폭시 수지, 우레탄 수지, SBR 수지를 전체 혼합물 중에 $0{\sim}50%$ 혼합하여 소포성, 기계적 물성, 내수성 등을 조사하였다. 소포제의 소포효과는 BYK-021이 가장 우수하였으며 적절한 사용량은 전체 혼합물에 대하여 0.3phr이었다. 수축율은 수지간의 상용성과 기공형성도에 영향을 받았으며 기계적 강도는 수지 분자간의 응집력, 수지와 시멘트의 결합력, 시멘트 입자간의 응집력 등에 영향을 받았다. 라텍스를 혼합한 것은 혼합하지 않은 것보다 수축율, 굴곡강도, 접착강도, 충격강도 등에서 우수한 물성을 나타내었다. EVA에 시멘트를 혼합했을 때에는 혼합하지 않았을 때보다 내수성이 떨어졌다.

• Geomechanics and Engineering
• /
• 제16권4호
• /
• pp.375-384
• /
• 2018

Unconfined compressive strength (UCS) of high plasticity clayey soil mixed with 5 and 10 % of Portland cement and four chemical agents such as sodium hexametaphosphate, aluminum sulfate, sodium carbonate, and sodium silicate with 0, 5, 10, and 20% concentrations was comparatively evaluated. The individual and combined effects of the cement and chemical agents on the UCS of the soil mixture were investigated. The strength of the soil-cement mixture generally increases with increasing the cement content. However, if the chemical agent is added to the mixture, the strength of the cement-chemical agent-soil mixture tends to vary depending on the type and the amount of the chemical agent. At low concentrations of 5% of aluminum sulfate and 5% and 10% of sodium carbonate, the average UCS of the cement-chemical agent-soil mixture slightly increased compared to pure clay due to increasing the flocculation of the clay in the mixture. However, at high concentrations (20%) of all chemical agents, the UCS significantly decreased compared to the pure clay and clay-cement mixtures. In the case of high cement content, the rate of UCS reduction is the highest among all cement-chemical agent-soil mixtures, which is more than three times higher in comparison to the soil-chemical agent mixtures without cement. Therefore, in the mixture with high cement (> 10%), the reduction of the USC is very sensitive when the chemical agent is added.

• 한국환경복원기술학회지
• /
• 제5권6호
• /
• pp.9-13
• /
• 2002

This study has been performed to investigate the physical and mechanical characteristics of compaction, volume change and compressive strength for reinforced soil mixed with cement. And confirm the reinforcing effects with admixture such as cement. To this end, a series of compaction test and compression test was conducted for clayey soil(CL) and cement reinforced soil. In order to determine proper moisture content and mixing ratio, pilot test was carried out for soil and cement reinforced soil. And the mixing ratio of cement admixture was fixed 3%, 6%, 9% and 12% by the weight of dry soil. As the experimental results, the maximum dry unit weight(${\gamma}_{dmax}$) was increased with the mixing ratio and then shown the peak at 10% reinforced soil, but the optimum moisture content(OMC) and the volume change was decreased with the ratio increase. And the compressive strength volume change was decreased with mixing ratio increased.

• 한국세라믹학회지
• /
• 제27권7호
• /
• pp.861-868
• /
• 1990

Investigation for the preparation of high strength hardened cement paste using ordinary portland cement, hydroxypropyl methyl cellulose(HPMC) with SiC powder was carried out. The cement paste was mixed with 0.1 of water cement ratio by twin roll mill and cured 60 days in humidity chamber. The hydration degree of cement paste cured with W/C=0.1 in 60 days was about 30% and most pores in the paste were found to be existed as gel pores of diameter less than 0.01㎛. The maximum flexural strength of hardened cement paste was about 960kg/㎠. When the SiC powder was added to the paste, the flexural strength was 1000∼1100kg/㎠ and the Young's modulus was 8∼9×105kg/㎠.

• 한국세라믹학회지
• /
• 제27권4호
• /
• pp.495-500
• /
• 1990

Investigation for the preparation of high strength hardened cement paste using ordinary portland cement, hydroxypropyl methyl cellulose (HPMC) with admixtures was carried out. For molding of the specimen, the paste was mixed with 0.1 of water cement ratio by twin roll mill. The maximum flexural strength of dried hardened cement paste was about 600∼700kg/㎠. When the SiC was added to the paste, the dry flexural strength was about 920kg/㎠ and the young's modulus was 5.2×105kg/㎠. When the admixtures were added to the specimens, wet strength of the harened cement paste immersed in water was showed around 50∼100kg/㎠ higher than that of plain specimen. Consequently it is recognized the water stability of hardened cement paste was remarkably improved by adequate admixture.

• 한국구조물진단유지관리공학회 논문집
• /
• 제16권6호
• /
• pp.113-123
• /
• 2012

하중을 받는 대상제체의 하중경감과 구조물의 경량화를 위해 본 연구에서 개발한 공법은 기존의 인공경량성토공법을 개선한 공법으로써 다공성의 경량골재인 bottom ash와 시멘트를 주재료로 하는 슬러리에 기포제를 혼합 발포시켜 경량의 성토재료를 제조하고 이를 대상 구조물에 적용하는 기술이다. 이 공법의 소재인 기포혼합콘크리트의 경우도 시멘트를 주성분으로 하고 있기 때문에 시간 의존적 변형이 발생되고, 외기 환경에 노출되므로 내구성능 저하는 필연적으로 발생하게 된다. 따라서 적용한 경량성토제의 시간 의존성 장기거동과 내구성 문제를 보다 명확하게 규명할 필요가 있다고 판단된다. 본 연구에서는 선행 작업으로 콘크리트의 배합인자별 역학적 특성 분석을 토대로 영향을 미치는 주요 인자를 도출하였으며, 이를 토대로 장기거동과 내구성 실험에 필요한 배합변수를 설정하여 그들의 미치는 영향을 분석을 통해 평가하였다. 연구결과, 개발된 기포혼합콘크리트는 건조수축변형률이나 크리프 등의 장기거동과 동결융해 및 탄산화의 내구성 측면에 있어 기존의 경량기포콘크리트에 비해 우수한 효과를 보였으며 특히, bottom ash의 혼입이 저항성 향상에 매우 효과적인 것으로 나타났다.

• Nuclear Engineering and Technology
• /
• 제44권3호
• /
• pp.331-342
• /
• 2012

Since the opening of the Shin-Kori #1,2 in 2005, fly ash mixed concrete has been used for NPP concrete structures under construction in Korea with the aim of preventing aging and improving durability. In this paper, the quality suitability of fly ash manufactured in Korea is assessed and the basic physical properties of fly ash mixed concrete and its durability against primary causes of aging are verified through experimental methods. Because of the internal structure filling effect from the pozzolanic reaction of fly ash and the resulting improvements in mechanical performance in such areas as strength and salt damage resistance, the durability of fly ash mixed concrete is shown to be superior. It is judged that this result can be applied in measures not only for improving the safety of NPP structures in operation in Korea but also for implementing effective structure life management should extending the life of structures be needed in the future.