• Journal of the Semiconductor & Display Technology
• /
• v.22 no.3
• /
• pp.119-124
• /
• 2023

In this study, experimental approach of the measurement of condensation and evaporation heat transfer coefficients is discussed for mixed refrigerants using in the ultra low-temperature cooling system for semiconductor etching process. An experimental apparatus was described performing the condensation and evaporation heat transfer measurements for mixed refrigerants. The mixed refrigerant used in this study was composed of the optimal mixture determined in previous research, with a composition of Ar:R14:R23:R218 = 0.15:0.4:0.15:0.3. The experiments were conducted over a temperature range from -82℃ to 15℃ and at pressures ranging from 18.5 bar to 5 bar. The convection heat transfer coefficients of the mixed refrigerant were measured at flow rates corresponding to actual operating conditions. The condensation heat transfer coefficient ranged from approximately 0.7 to 0.9 kW/m2K, while the evaporation heat transfer coefficient ranged from 1.0 to 1.7 kW/m2K. The detailed discussion of the experimental methods, procedures, and results were described in this paper.

• Journal of Korean Society of Transportation
• /
• v.28 no.6
• /
• pp.75-84
• /
• 2010

Controlled traffic intersection is critical point in terms of transportation network performance, where the most of traffic congestion arises. One of the most important and favorable measure of effectiveness in the signal controlled intersection is approach delay. Although lots of efforts to develop traffic delay estimation models have been made throughout the years, most of them were focusing on homogeneous traffic flow. The purpose of this research is to develop a traffic delay estimation model for traffic flow mixed with bus based on the horizontal shockwave theory. Traffic simulation is performed to test the adaptation level of the model in generic environment. The result shows that the delay increases with increasing bus traffic. Overall model accuracy comparing simulation result is acceptable, that shows the error range around 10 percent.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.5D
• /
• pp.671-677
• /
• 2011

A diversity of railway network function enhancement projects such as the double tracking, electrification, and direct operation have been actively executed to improve the railway service. When the new rapid transit is provided, how many people will use it instead of other transports? How will the railway choice behavior be changed? Accordingly, in this paper, the applicability of diverted travel demand forecast methods, by Revealed Preference(RP) and Stated Preference(SP) data was reviewed for Daegu metropolitan rail rapid transit service. As the result of combining RP and SP data, including the sequential and simultaneous approach, the total travel time and travel cost parameters are of the right sign and are highly significant. The simultaneous approach is more efficient in terms of the estimation of coefficients. In particular, methods to improve validity of the Mixed RP/SP models, when RP data is used proportionally, the diverted travel demand can be easily identified by railway fare and travel time service level. Therefore, it is considered that this will practically apply even in other regions as well as Daegu metropolitan railway.

• Journal of the Institute of Convergence Signal Processing
• /
• v.6 no.3
• /
• pp.148-156
• /
• 2005

The purpose of this paper is to propose an approach to design a robust servo controller based on the mixed $H_2/H_{\infty}$ theory, and confirm its validity by applying to a benchmark problem. First, the existing $H_{\infty}$ servo problem is modified to a structure for the mixed $H_2/H_{\infty}$ control problem by virtue of the internal model principle. By making use of proposed structure, we can divide specifications required in the robust servo system design into $H_2$ and $H_{\infty}$ performance criteria, respectively. It is shown that the proposed design approach is quite effective through an application to a three inertia benchmark problem.

• Korean Journal of Cleft Lip And Palate
• /
• v.15 no.2
• /
• pp.69-82
• /
• 2012

Our Team Approach consists of following five stages; (1) Peri-natal care until lip repair After ultrasound diagnosis, some obstetricians recommend the mother with CL/P fetus to undergo prenatal counseling in our CLP clinic. On the day the CL/P baby was born, our oral surgeon, nurse, and pedodontist visit the maternity clinic, and take counseling and take impression for a feeding plate. The cheiloplasty is performed in three months old. (2) From lip repair to palatal repair At one year of age, Otorhinolaryngologist checks middle-ear disease. Palatoplasty is carried out at 1.5 - 2 years old. (3) In deciduous and early mixed dentitions Speech is the most important issue in social life for the CL/P subjects, therefore the training of velopharyngeal function is essential. Orthodontist monitors dentofacial development from 5 years of age. In the case of severe maxillary under-growth or severe collapse, maxillary protractor or lateral expansion is indicative, respectively. In early mixed dentition, upper central incisor on the cleft area erupts with some torsion, and then the traumatic occlusion with tooth torsion must be corrected. (4) In mixed dentition Right before the eruption of upper canines, secondary bone grafting is performed. One year prior to the operation, maxillary fan-type expansion is carried out to correct the collapse of maxillary segments. Following the surgical operation, the erupted canine will be moved into the transplanted bone to avoid alveolar resorption. (5) In permanent dentition Final tooth alignment is carried out after eruption of second molars. Some cases may require orthognathic surgery after physical maturation. Prosthetic oral rehabilitation including the dental-implant is carried out after age eighteen.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.12
• /
• pp.255-264
• /
• 2021

In this paper, we propose operations and maintenance (O&M) planning approach for floating offshore wind farm using the mathematical optimization. To be specific, we present a MILP (Mixed Integer Linear Programming that suggests the composition of vessels, technicians, and maintenance works on a weekly basis. We reflect accessibility to wind turbines based on weather data and loss of power generation using the Jensen wake model to identify downtime cost that vary from time to time. This paper also includes a description of two-stage approach for maintenance planning & detailed scheduling and numeric analysis of the number of vessels and technicians on the O&M cost. Finally, the MILP model could be utilized in order to establish the suitable and effective maintenance planning reflecting domestic situation.

• Wind and Structures
• /
• v.8 no.6
• /
• pp.407-426
• /
• 2005

A hybrid RANS/LES approach, based on the Limited Numerical Scales concept, is applied to the numerical simulation of the flow around a square cylinder. The key feature of this approach is a blending between two eddy-viscosities, one given by the $k-{\varepsilon}$ RANS model and the other by the Smagorinsky LES closure. A mixed finite-element/finite-volume formulation is used for the numerical discretization on unstructured grids. The results obtained with the hybrid approach are compared with those given by RANS and LES simulations for three different grid resolutions; comparisons with experimental data and numerical results in the literature are also provided. It is shown that, if the grid resolution is adequate for LES, the hybrid model recovers the LES accuracy. For coarser grid resolutions, the blending criterion appears to be effective to improve the accuracy of the results with respect to both LES and RANS simulations.

• KDI Journal of Economic Policy
• /
• v.39 no.4
• /
• pp.25-50
• /
• 2017

Whereas a large variety of previous studies show mixed results regarding the relationship between public investment and economic outcome, several studies have been conducted on related issues in Korea. The present study deals with the effect of public investment in Korea on economic growth and productivity. Using administrative data, it exploits three different methodologies: the total factor productivity approach, production function approach, and stochastic frontier production function approach. The results of this study show that public investment has a statistically significant effect on economic growth. However, it contributes little to enhance productivity. It is explained that there exists inefficiency of production in the Korean economy. These findings indicate that public investment has played a central role in the direct input factor and not in indirect role in Korea. Thus, it is necessary for public investment policies to concentrate on enhancing the efficiency of the Korean economy.

• 한국경영정보학회:학술대회논문집
• /
• 2007.06a
• /
• pp.395-400
• /
• 2007

Previous studies present the mixed results on online reputation mechanism. In this study, we have found that an approach based on Bayesian statistics can explain most results of previous studies which are conflicting with each others. With this model, we explain why negative ratings have more significant marginal impacts on sellers' reputation than positive ones do. Furthermore, we even show why the feedbacks with a few negative ratings may increase the value of the item and final prices by confirming buyers' prior beliefs on the sellers' reputation much more than those without negative ratings. Also, we explain why there are not many negative ratings. Even though some studies suggest this because of generosity of users, our model shows that the reason is that the existence of FS itself prevents bad sellers from participating to the market as a signal itself. Even further, we show how this extreme tendency of positive ratings gets even stronger as markets evolve. Finally, to validate our analytical results, we examine the previous studies and see what factors effect the outcomes of their analyses.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.3
• /
• pp.629-631
• /
• 2007

In hands-free full-duplex communication systems, acoustic signals picked up by the microphones can be mixed with echo signals as well as noises, which may result in poor performance of the corresponding communication system. Also, the system performance may decrease further if the reverberation occurs since it is harder to estimate the impulse response of the demixing system. For blind source separation (BSS) in such cases, a time-frequency masking approach can be employed to separate undesired echo signals and noises, but, permutation ambiguities also should be solved for the echo cancellation. In this paper, we propose a new acoustic echo cancellation (AEC) approach utilizing the time-frequency masking and higher-order statistics, whereby a desired signal selection, based on coherence and third-order statistics (i.e., kurtosis), is introduced along with output signal normalization. Simulation results demonstrate that the proposed approach yields better echo and noise cancellation performances than the conventional AEC approaches.