• Bulletin of the Korean Chemical Society
• /
• v.34 no.9
• /
• pp.2604-2608
• /
• 2013

An efficient synthesis of 2,2'-dipyrryl ketones has been carried out from pyrrole-2-carboxylic acids using trifluoroacetic anhydride (TFAA). Simultaneous generation of both mixed anhydride and 2-unsubstituted pyrrole, via facile decarboxylation with in-situ generated TFA, made their cross reaction (intermolecular Friedel-Crafts acylation) possible and efficient.

• YAKHAK HOEJI
• /
• v.28 no.1
• /
• pp.17-20
• /
• 1984

Synthetic procedures to synthesize fenbufen-acetaminophen ester were searched by acid chloride method, DCC method and mixed acid anhydride method. The compound was synthesized by DCC method and mixed acid anhydride method but could not be synthesized by acid chloride method. Its anti-inflammatory activity was superior to acetaminophen and similar to fenbufen.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.7
• /
• pp.1037-1043
• /
• 2005

Kinetic study on the cleavage of N-methylphthalamic acid (NMPA) in mixed acidic aqueous-acetonitrile solvent reveals the formation of both phthalic anhydride (PAn) (through O-cyclization) and N-methylphthalimide (NMPT) (through N-cyclization). The formation of NMPT varies from $\sim$20% to $\sim$3% with the increase in the content of acetonitrile from 2 to 70% v/v. Pseudo first-order rate constants for the formation of PAn are more than 4-fold larger than those for the formation of NMPT at 2% v/v $CH_3CN$ in mixed aqueous solvents. Pseudo first-order rate constants for alkaline hydrolysis of NMPT reveal a nonlinear decrease with increase in the content of $CH_3CN$ in mixed aqueous solvents.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1995.04a
• /
• pp.142-147
• /
• 1995

In this study, styrene-maleic anhydride copolymer (SMA) was synthesized from styrene and maleic anhydride and further reacted with sulfuric acid to obtain water-soluble SMA and the flow and strength tests of cement mortar mixed with copolymers were carried out to evaluate the capability of copolymers as high range water reducer for the concrete. It was found from flow experiment that the fluidity of cement mortar mixed with sulfonated SMA (SSMA) was larger than that miced with aminophenol-substituted SSMA (SmSMA). The decreasing rate of the flow of cement mortar mixed with SSMA and SmSMA was decreasing rate of the flow of cement mortar mixed with SSMA and SmSMA was significantly lower than that mixed with naphthalene condensate (NSC). The compressive strength of the hardened cement mortars containing 0.5% copolymers after 28 days curing was examined. The compressive strength of hardened cement mortar containing SSMA and SmSMA was increased up to 32% and 13%, respectively, when compared to the plain. As the results, the copolymers (SSMA and SmSMA) used in this study are greatly expected as a good high range water reducers for the concrete.

• Proceedings of the Korean Fiber Society Conference
• /
• 1986.06a
• /
• pp.35-35
• /
• 1986

• Journal of the Korean Society of Industry Convergence
• /
• v.13 no.2
• /
• pp.93-98
• /
• 2010

Polypropylene / montmorillonite / wood flour nanocomposites are melt-mixed by using a twin screw extruder. The montmorillonite is intercalated by the wood flour and the basal spacing of montmorillonite is increased with increasing the content of wood flour. The exfoliation constantly occurs by adding more than 10 wt.% of maleic anhydride-grafted polypropylene as the compatibilizer, which is used for improving the interfacial adhesion between matrix and filler. Also, the maleic anhydride-grafted polypropylene enhances the mechanical properties of the nanocomposites.

• Applied Chemistry for Engineering
• /
• v.7 no.5
• /
• pp.888-901
• /
• 1996

Oxidations of cyclopentene and of 1-pentene with air have been studied on a V/Mo/P/Al/Ti-mixed oxide catalyst in a fixed bed integral reactor. At high levels of conversion maleic anhydride was in each case produced as the major organic product, along with minor amounts of phthalic anhydride and, only starting from 1-pentene, also of citraconic anhydride. At lower levels of conversion a total of 30 organic products have been identified, some of which may be intermediates on the way from the substrates to the three anhydrides mentioned above. Based on the dependence of selectivities of the organic products on conversion, reaction schemes for the formation of maleic anhydride, phthalic anhydride and citraconic anhydride have been proposed. Oxidation at $310^{\circ}C$ led to increasing conversions and selectivities for maleic anhydride with decreasing space velocities. The highest selectivities for maleic anhydride were obtained at conversion of ca. 100%. Oxidation at a constant space velocity of $2{\cdot}10^4h^{-1}$ led to increasing conversions with increasing temperatures in the range of $300^{\circ}C{\sim}420^{\circ}C$, while the selectivity for maleic anhydride passed through a maximum value of ca. 39% at $370^{\circ}C$ in the oxidation of cyclopentene and a maximum value of ca. 30% at $400^{\circ}C$ in the oxidation of 1-pentene.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.4
• /
• pp.584-586
• /
• 2006

• Proceedings of the Korea Concrete Institute Conference
• /
• 1995.04a
• /
• pp.94-99
• /
• 1995

Naphthalene sulfonated condensatd(NSF) has been widely using for the superplasticizing of ement and concrete. But NSF has a very large mobility loss with elapsed tiom. To retain mobility of NSF during a certain time, maleic anhydride and acrylic acid copolymer(MA) was polymerized and mixed with NSF in order to perpare admixture holding mobility-retention property of cement. By applying this admixture for ement paste, we examined the fluidity and mobility retention property as a function to elapsed time and measured the compressive strength of mortar with curing time. As a result, NSF containing 20wt% of MA showed very excellent fluidity and mobility-retention property. These properties were affected by the added amount of admixture and the ratio of water to cement.

• Journal of the Korean Ceramic Society
• /
• v.23 no.6
• /
• pp.71-75
• /
• 1986

The forming reaction processes of magnesium aluminate spinel by a thermal decomposition of sulfate hydrate were studied with DTA, TG. SEM and X-ray powder diffraction methods. The hydrous salt composed of the mixture of the two compounds of $MgSO_4$ $6H_2O$ and ${AL_2}({SO_4})_17H_2O_3$ in which both sulfates were crystalline. On heating the hydrous slat the crystalline magnesium and aluminum sulfate anhydride to amorphous alumina magnesium sulfate anhydride decomposed to amorphous magnesia and these amorphous oxides reacted completely each other to form a spinel at $1000^{\circ}C$ The apparent activation energy of forming reaction of spinel was 36.5 kcal/mole($900^{\circ}C$~$1000^{\circ}C$) The crystallite size of spinel obtained at $1000^{\circ}C$ after 1 h was 380$\AA$.