• 제목/요약/키워드: Mixed Sludge

검색결과 372건 처리시간 0.027초

Treatment of Organic Waste with Microorganisms of Mixed Population

  • 김기은
    • KSBB Journal
    • /
    • 제22권3호
    • /
    • pp.129-133
    • /
    • 2007
  • This study represents that a removal efficiency of organic matters in wastewater is activated by a sludge process using new mixed microbial population. In case of mixed microorganisms, removal rates of suspended solid (SS), biochemical oxygen demand (BOD) and chemical oxygen demand (COD) were over 90 percent under experimental condition, and removal efficiency of organic matters, sludge density index (SDI) and capillary suction time (CST) in mixed population were higher than that in not-mixed microorganism, while total kjeldahl nitrogen (TKN) and total phosphorus (T-P) which indicate a degree of eutrophication were removed easily in both case. From these results, we may propose that an application of the mixed microbial population is useful to treat domestic wastewater including a great deal of organic matters.

혐기성 연속회분식 공정을 이용한 분뇨처리시 소화슬러지의 침강 및 탈수특성 (Dewatering and Settling Characteristics of Digested Sludge from the Anaerobic Sequencing Batch Reactor for Treatment of Nightsoil)

  • 이준걸;장덕;허준무;손부순;장봉기;박종안
    • 한국환경과학회지
    • /
    • 제7권6호
    • /
    • pp.867-873
    • /
    • 1998
  • Laboratory study was conducted to provide basic data for operating anaerobic sequencing batch reactor(ASBR) process for treatment of nightsoil. The experiments were concerned with digestion characteristics, settleabiltity and dewaterability of digested sludge in ASBR system. Completely-mixed dally-fed control reactor without solid-liquid separation step was also operated to evaluate the baseline performance since the nature of nightsoil was changed with time. In all case, gas production from the ASBR shows 1.3 to 1.44 times higher than that from control, in spite of almost similar trend in organics removal. During thickening period, remarkable decrease in surface settling velocity was observed at the ASBRs compared with the control. In case of the ASBR run, flotation of mixed digested sludge was not occurred. Also, ultimate thickened volume of ASBRs increased 1.2~1.5 times compared with control. Dewaterability of digested sludge without conditioning decreased when the completely-mixed daily-fed reactor for ASBR run was converted to the ASBR. However, improvement of dewaterability of digested sludge from the ASBRs was observed as a result of addition of FeCl$_3$ to digested sludge for conditioning.

  • PDF

레미콘 슬러지를 활용한 콘크리트블록 활용에 대한 기초 연구 (A Study on the Possibility of Using Concrete Blocks with Ready Mixed Concrete Sludge)

  • 정재호
    • 한국건축시공학회지
    • /
    • 제19권4호
    • /
    • pp.307-312
    • /
    • 2019
  • 레미콘 제조 시 발생되는 슬러지는 폐기물로 분류되어 높은 비용을 지불하며 처리를 하고 있다. 특히 중소레미콘 업체에서는 이 비용이 큰 부담으로 작용되며, 일부 업체에서는 불법적인 처리가 발생되고 있는 실정이다. 따라서 본 연구에서는 레미콘슬러지를 콘크리트블록용 조성물로 재활용하는 방법을 제시 하는데 그 목적이 있다. 레미콘슬러지를 단순 건조하여 사용 하였을 때에는 슬러지에 포함된 잔류화학혼화제와 에트린가이트가 존재하여 콘크리트블록의 압축강도, 동결융해 후 압축강도 물리적성능이 크게 떨어져 콘크리트호안 및 옹벽블록의 품질기준을 만족하지 못하는 것으로 나타났다. 물리적 성능을 만족시키기 위한 방법으로 레미콘슬러지를 $900^{\circ}C$정도의 고온에서 소성시켜 에트린가이트와 잔류 화학혼화제 등을 분해시킨 후 사용하는 것이 우수한 것으로 나타났다.

볼-밀 가용화 효과의 향상을 위한 하수슬러지 조건에 대한 연구 (Sewage sludge conditions for promoting solubilization in the ball mill treatment)

  • 이명주;김태형;남양원;황선진
    • 상하수도학회지
    • /
    • 제22권5호
    • /
    • pp.505-510
    • /
    • 2008
  • Excess sludge and raw sludge were treated by ball mill in order to promote solubilization, and it was known that the level of solubilization was higher in excess sludge rather than raw sludge. About solid concentration, with the increase of TS, the amounts of solubilization was increased. And excess sludge was solubilized more effectively with the increase of ball mill treatment time. Especially, in case of excess sludge, within 5 min of ball mill treatment, 6 times of solubilization was achieved compared with raw sludge. The effect of bead size was also tested and 1 mm bead was most desirable when applied to the TS 4% of excess sludge. Particle size decrease by the ball mill treatment was more effective in raw sludge, nevertheless the level of solubilization was always higher in excess sludge. This means that the results of particle analysis could not be understood as a indicator for sludge solubilization. Generally, excess sludge and raw sludge are mixed at the thicker in the STP, but considering a ball mill pretreatment as an alternative for sludge solubilization, it is desirable to treat not raw sludge but excess sludge alone in the aspect of solubilization yield and economical process.

플라이 애시 및 제지슬러지 애시를 혼입한 도시 쓰레기 소각재 경화체의 강도적 특성 (Strength Property of Municipal Wasts Ash Hardening using Fly-Ash and Paper Sludge Ash)

  • 김재신;고대형;문경주;소양섭
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2000년도 가을 학술발표회논문집(I)
    • /
    • pp.333-338
    • /
    • 2000
  • The purpose of this study is to evaluate the compressive strength properties of municipal waste ash hardening using the unrefined fly-ash and paper sludge ash and to offer basic data to someone for recycling municipal waste ash. Unrefined fly-ash and paper sludge ash are used with admixture. MWA are tested that grading, specific gravity and pH value and observed microsructure of particle with SEM. The compressive strengths of MWA hardening which is mixed with regular ratio according to each admixture are measured. In the results of test, fly-ash is very effective for reducing content of cement by 50% in the recycling of MWA. But proper content mixed paper sludge ash is recommend by about 20% in binder.

  • PDF

레미콘 품질 안정화를 위한 효율적인 단위수량 관리 방안 (Efficient Unit-Water Management Method for Stabilizing the Quality of Ready-mixed Concrete)

  • 최성우;류득현
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2021년도 봄 학술논문 발표대회
    • /
    • pp.327-328
    • /
    • 2021
  • In the manufacturing process of ready-mixed concrete, quantity management directly affects the workability and strength of concrete. Therefore, water quantity is the most important management factor for water quality control of ready-mixed concrete. It can be said that the number of unit water in the mix design, the water quantity due to the surface water contained in the aggregate used, and the water quantity taking into account the concentration of sludge contained in the recycling water when using the recycling water are factors that affect the quantity management of ready-mixed concrete. In this study, as a stable quality control method of ready-mixed concrete, a quantity management method by aggregate surface water and a sludge concentration management method according to the use of recycling water were proposed. Thus, we tried to suggest an efficient quantity management method for stabilizing the quality of ready-mixed concrete.

  • PDF

부숙된 음식물 쓰레기의 이화학성상 변화 및 줄지렁이의 섭식반응 (Changes in several physco-chemical properties of aged food waste and feeding response of tiger worms(Eisenia fetida) on it)

  • 배윤환;이병도
    • 유기물자원화
    • /
    • 제12권4호
    • /
    • pp.130-138
    • /
    • 2004
  • 서로 다른 지역에서 발생한 음식물 쓰레기에 제지슬러지, 인분케익을 혼합하여 부숙시킨 후, 부숙기간에 따른 음식물 쓰레기의 이화학적 성상 및 줄지렁이의 섭식반응 및 생체량 변화를 조사하였다. 발생지역에 따른 음식물 쓰레기의 이화학적 성상은 큰 차이가 없는 것으로 나타났으며, 지렁이가 섭식하기에는 음식물 쓰레기내의 염분 농도가 전반적으로 높게 나타났다. 음식물 쓰레기에 인분케?을 혼합하여 부숙시켰을 때보다 제지슬러지를 혼합, 부숙시켰을 경우 염류농도 저하효과가 높게 나타났으나, 지렁이의 섭식효율과 생장률을 크게 개선시킬만큼 효율적이지는 않은 것으로 나타났다. 따라서 음식물 쓰레기에 대해서 지렁이 처리법을 적용시키기 위해서는 음식물 쓰레기내의 염류농도를 저하시키는 방법의 개발이 선행되어야 할 것으로 판단된다.

  • PDF

석유화학폐수슬러지와 유기성 폐기물 혼합에 의한 연소특성 및 고형연료 폐기물화 재활용에 관한 연구 (A Study on Combustion Characteristics and Evaluating of RDFs(Refused Derived Fuels) from Mixture of Petrochemical Wastewater Sludge and Organic Matters)

  • 한영립;최영익
    • 한국환경과학회지
    • /
    • 제24권2호
    • /
    • pp.237-244
    • /
    • 2015
  • This objectives of research are to figure out combustion characteristics with increasing temperature with petrochemical sludge by adding wasted organic matters which are waste electric wire, anthracite coal and sawdust, and to exam heating value and ignition temperature for using refused derived fuels(RDFs). After analyzing TGA/DTG, petrochemical sludge shows a rapid weight reduction by vaporing of inner moisture after $170^{\circ}C$. Gross weight reduction rate, ignition temperature and combustion rates represent 68.6%, $221.9^{\circ}C$ and 54.1%, respectively. In order to assess the validity of the RDFs, the petrochemical sludge by adding wasted organic matters which are waste electric wire, anthracite coal and waste sawdust. The materials are mixed with 7:3(petrochemical sludge : organic matters)(wt%), and it analyzes after below 10% of moisture content. The ignition temperatures and combustion rates of the waste electric wire, anthracite coal and waste sawdust are $410.6^{\circ}C$, $596.1^{\circ}C$ and $284.1^{\circ}C$, and 85.6%, 30.7% and 88.8% respectively. In heating values, petrochemical sludge is 3,600 kcal/kg. And the heating values of mixed sludge (adding 30% of the waste electric wire, anthracite coal and waste sawdust) each increase up to 4,600 kcal/kg, 4,100 kcal/kg and 4,300 kcal/kg. It improves the ignition temperatures and combustion rates by mixing petrochemical sludge and organic matters. It is considered that the production of RDFs is sufficiently possible by using of petrochemical sludge by mixing wasted organic matters.

Effect of Cow Manure and Saw Dust as the Additive Materials for Efficient Vermistabilization

  • Kim, Cbul;Son, Hee-Jeoog;Yoon, Tae-Kyung
    • 한국환경보건학회지
    • /
    • 제33권6호
    • /
    • pp.488-492
    • /
    • 2007
  • The influence of additive materials including saw dust and cow manure in the ripening of leather sludge for the efficient vermisabilization was studied. The ripening characteristics of the leather sludge, the growth of earthworms in the growth bed and the by-products like cast were observed according to the mixing ratio of additive materials. When the mixed leather sludge of which the additive materials contents were over 20% were ripened for 50 days, the values of ORP and alkalinity were changed to the favorable ranges for earthworms, the positive (+) and below 1,000 mg/l as $CaCO_3$, respectively. The velocity of ripening improving the characteristics of the leather sludge was faster in the sludge mixed with cow manure than saw dust. This results could also be verified from the monitoring of the states of earthworm growth using the survival rate, the increase rate of lifeweight and the hatching rate of earthworm cocoon in the their growth bed packed with the ripened sludge. The values of CEC in cast, the vermi-stabilized sludge, were increased with the mixing ratio of additive materials, but the content of heavy metals was drcreased by the dilution effect and accumulation in the earthworm body. Above results show that the leather sludge might be efficiently stabilized by earthworms through the ripening for 50 days using additive materials. Cow manure can be used as a good additive materials for leather sludge as much as saw dust, and the optimum content of additive materials in the well-ripened leather sludge was about 30%.

오존을 이용한 하수슬러지의 감량화와 안정화 (Reduction and Stabilization of Sewage Sludge by Ozonation)

  • 이창근;황은주;강성재;빈정인;이병헌
    • 한국물환경학회지
    • /
    • 제20권3호
    • /
    • pp.290-295
    • /
    • 2004
  • In this study, ozone was adopted for the reduction and stabilization of waste sludge from the municipal sewage treatment plant. The waste sludge used in the experiments was primary sludge, excess sludge and a mixture of the two. The sludge cells and flocs were disrupted by ozonation resulting in the reduction of TSS and VSS concentrations. In the case of the primary sludge with a concentration of 20 gTS/L, the TSS and VSS concentrations were reduced 28%, 33% and the TCOD concentration was reduced 20% respectively. The consumption of ozone was $0.18gO_3/gSS$. In the case of the excess sludge with a concentration of 7.5 gTS/L, the TSS and VSS concentrations were reduced 37%, 41%, and the TCOD concentration was reduced 19% respectively. The consumption of ozone was $0.33gO_3/gSS$. In the case of the mixed sludge of 9.3 gTS/L, the TSS and VSS concentrations were reduced by 45%, 53%, and the TCOD was reduced 26% respectively. The desirable consumption of ozone was $0.27gO_3/gSS$. As ozonation proceeded, the level of SCOD increased due to the release of intracellular materials. However TCOD was reduced due to mineralization resulting from the transformation of organic materials to inorganic materials.