• 한국결정성장학회지
• /
• 제17권1호
• /
• pp.11-17
• /
• 2007

The spherical NiZn ferrite particles were prepared by ultrasonic spray pyrolysis with mixed solution of aqueous metal nitrates. The NiZn ferrite particle was observed with nano-sized primary particles of about 10 nm or less before annealing which represented as paramagnetic behavior measured at 77 K and room temperature. The typical abnormal growth of primary particles like polyhedral primary particles was observed by annealing at 1273 K with Zn-concentration dependency. The XRD patterns showed good crystallinity of NiZn ferrite powder after annealing. In annealing process, the intra-particle sintering phenomenon was observed and the spherical particle morphology was collapsed at 1673 K. The saturation magnetization of NiZn ferrite powder for each annealing temperature was decreased with measuring temperature of $77{\sim}$300K.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 춘계학술발표대회 논문집
• /
• pp.257-260
• /
• 2005

Graphite reinforced conductive polymer composites were fabricated by the compression molding technique. Graphite powder was mixed with an phenol resin to impart electrical property in composites. The ratio and particle size of graphite powder were varied to investigate electrical conductivity of cured composites. In this study, graphite reinforced conductive polymer composites with high filler loadings(>66wt.%) were manufactured to accomplish high electrical conductivity. With increasing the loading ratio of graphite powder, the electrical conductivity and flexural strength increased. However. above 80wt.% filler loadings, flexural strength decreased due to lack of resin. Regardless of graphite particle size, electrical conductivity wasn’t varied. On the other hand, with decreasing particle size, flexural strength increased due to high specific surface area.

• 대한기계학회논문집B
• /
• 제28권7호
• /
• pp.771-779
• /
• 2004

Unsteady behavior of the early wake in the viscous flow field past an impulsively started semicircular cylinder is studied numerically. In this paper, we propose the hybrid diffusion scheme to simulate dynamic characteristics of wake such as a fishtail-like flapping and an alternate vortex-shedding more accurately. This diffusion scheme based on particle strength exchange is mixed with the stochastic nature of random walk method. Also, the viscous splitting algorithm which calculates convective and diffusion terms successively is applied in order to handle random walk method effectively. Consequently, the early behavior of wake due to the breakdown of symmetrical vortici balance is more practically simulated with the vortex particle method.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.505-510
• /
• 2007

Concrete track will be constructed in Gyungbu High Speed Railway II(GHSR II) stage construction site from Daegu to Busan. Concrete track is supported by substructure consisting of the original ground and embankment and does not allow the settlement of track because of its structural type. The embankment is composed of rock and soil mixture and settlement is feasible. So management of settlement of embankment is key point in successful construction of the concrete track. Compaction management of mixed fill materials is important in minimizing the settlement of embankment. In this study, in order to assess the compaction characteristics of mixed fill materials, large laboratory compaction tests were conducted. Mixed fill materials were obtained from two construction sites in GHSR II construction site. Modeled mixed fill materials having different rock type, fine content, maximum particle diameter, and moisture contents were prepared. From the test results, compaction characteristics of mixed fill materials were analysed.

• 한국지반신소재학회논문집
• /
• 제2권1호
• /
• pp.27-37
• /
• 2003

섬유혼합토의 전단강도 및 마찰 특성에 영향을 미치는 요인으로는 혼합되는 흙의 입도분포와 흙입자의 형상 등과 같은 흙의 공학적 특성과 섬유의 형상, 길이, 직경, 인장강도, 탄성계수, 마찰계수, 섬유 혼합률 등과 같은 섬유의 물리적 역학적 특성 그리고 구속응력, 다짐상태 등의 외적 인자 등을 들 수 있다. 본 연구에서는 흙종류, 섬유종류, 섬유혼합률 그리고 다짐도에 따른 섬유혼합토의 마찰특성을 평가하기 위하여 일련의 전단마찰시험 및 인발시험을 수행하였다. 본 연구에서는 공학적으로 그 특성이 다소 불량한 두 가지 종류의 흙시료(통일분류법상 SM 및 ML)에 세 가지 종류의 폴리프로필렌 섬유(망사 38mm, 망사 60mm 및 단사 60mm)를 0.2% 및 0.3%의 혼합률로 혼합한 섬유혼합토를 다짐도 85% 및 95%로 조성하여 실험을 수행하였고, 보강재로는 지오그리드를 사용하였다.

• 한국초지조사료학회지
• /
• 제34권4호
• /
• pp.288-295
• /
• 2014

본 연구는 옥수수 사일리지를 이용하여 TMR 제조 시 배합시간에 따른 물리적 특성(Particle size, peNDF 및 laceration)의 변화를 조사하고, 반추위 내 in situ 건물분해율 및 비유중기 착유우의 유생산성에 미치는 영향을 조사하고자 수행되었다. TMR 시험사료는 동일한 원료를 이용하여 배합시간을 30분(T1구)과 50분(T2구)으로 제조하였다. Penn State Particle Size Separator (PSPS, 19 mm와 8mm 체)로 분리하여 입자크기의 분포를 분석한 결과 배합 시간이 30분(T1)에서 50분(T2)로 증가함에 따라 하층(<8mm)의 비율이 유의적으로 증가하였고(p<0.01), $peNDF_{&gt;8.0}$는 유의적으로 감소하였으며(p<0.01), 굵은 비율(${\geq}1mm$) 이 유의적으로 감소하였다(p<0.01). 반추위 내 in situ 건물 분해율은 모든 배양시간에서 처리구간 차이가 없었지만 24시간 배양에서 T1구에서 유의적으로 높게 나타났다. (p<0.01). 산유량은 처리구간 차이가 없었지만 유지방은 T1이 유의적으로 높게 나타났다(p<0.01). 본 연구 결과에서 옥수수 사일리지 위주의 TMR 제조 시 배합시간을 단축 조절함으로서 산유량 및 유성분에 대한 부정적 영향 없이 조사료의 물리적 사료가치를 증진하는데 효과가 있을 것으로 기대된다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.199.2-199.2
• /
• 2010

Biodiesels are well-known as alternative fuels. also we know that biodiesels increase NOx and reduce PM(Particulate Matter) by previous many studies. But PM in most these studies was considered about the mass. In this study, We have performed experimental test for PM and exhaust emission by mixed ratio of biodiesel in heavy duty diesel engine. PM was investigated by The nano particle number and the mass. The mass of PM was evaluated by using the standard gravimetric method, The number of PM was evaluated by using the EEPS(Engine Exhaust Particle Sizer), on the ESC(European Steady Cycle) mode. Sampled gas through dilutor was directly extracted from tail pipe and EEPS measured diluted exhaust gas. Biodiesel is made up of used cooking oil. Diesel as base fuel was sold on market and contains 2% biodiesel. The mass of PM was reduced 10% and the nano particle number was increased 5%. The particle number less than 40nm was increased, but the particle number more than 40nm is decreased.

• 한국주조공학회지
• /
• 제14권6호
• /
• pp.530-540
• /
• 1994

Aluminium-silicon alloy(JIS AC8A) matrix composites reinforced with SiC particles were fabricated by spray-cast forming process, and the microstructure of powders and preforms produced were studied by using an optical and scanning electron microscopy. SiC particles were co-sprayed by mixed phase injection method during the spray casting process. Most of the composite powders formed by this mixed phase injection method exhibit morphology of particle-embedded type, and some exhibits the morphology of particle attached type due to additional attachment of the SiC particles on the surface of the powders in flight. The preforms deposited were resulted in dispersed type microstructure. The pre-solidified droplets and the deposited preform of SiC-reinforced aluminium alloy exhibit finer equiaxed grain size than that of unreinforced aluminium alloy. Eutectic silicons of granular type are crystallized at the corner of the aluminum grains in the preforms deposited, and some SiC particles seem to act as nucleation sites for primary/eutectic silicon during solidification. Such primary/eutectic silicons seem to retard grain growth during the continued spray casting process. It is envisaged from the microstructural observations for the deposited preform that the resultant distribution of SiC injected particles in the Al-Si microsturcture is affected by the amount of liquid phase in the top part of the preform and by the solidification rate of the preform deposited.

• 한국전기전자재료학회논문지
• /
• 제15권6호
• /
• pp.543-550
• /
• 2002

In this paper, the $CF_4$ decomposition rate and by-product were investigated for two simulated plasma reactors which are metal particle reactor and spiral wire reactors as a function of mixed gases. The $CF_4$ decomposition rate by plasma reactor with metal particle electrode had a gain of 20~25% over that by plasma reactor with spiral wire electrode. The $CF_4$ decomposition efficiency increases with increasing applied voltage up to the critical voltage for spark formation. The $CF_4$ decomposition efficiency of metal particle reactor was about 80% at AC 24kV. The $CF_4$ decomposition rate used Ar-$N_2$ as base gas was the highest among three base gases of $N_2$, $Ar-N_2$, air. The by-products of the $N_2$, $N_2Ar$ base as were similar, but in case of air base they were different.

• 전기의세계
• /
• 제29권8호
• /
• pp.524-531
• /
• 1980

In order to investigate the effect of inorganic dielectric fine particle mixed in Low Density Polyethylene on the deterioration by treeing, a comparative study for initiation and development of the tree has been carried out between the pure thin film specimen and the same geometrical specimen mixed with a constant weight percent by a defiend particle size of $Al_{2}$O$_{3}$ and SiO$_{2}$, having larger dielectric constants than that of the base material. According to the results, it has been observed that as increasing dielectric constant, the initiation of tree is expedited, however, the development of the tree reached at the surface of filler particles shows the suppressive trends. From these facts, a reasonable interpretation may be possible by considering the effect of intensified electrical field around the tip in the presence of filler particles, that the initiation and the development of tree are a mechanical break down process caused by Maxwell stress due to the concentration of electrical field at the tip. This suppressive effect is specifically suggestive for the reason that a discharge route must be constructed around the particle surface because of the intensified field strength near filler, which, in turn, reduces the geometrical curvature of the tip so that the local intensity of electrical field can be relaxed. Further more an experimental evidence for this assumption was able to observe in this investigation.