• 한국대기환경학회지
• /
• 제12권3호
• /
• pp.231-241
• /
• 1996

The effect of radiation and buoyancy on the thermophoresis phenomenon owing to the presence of highly absorbing, emitting particles (such as soot or pulverized coal) suspended in a two phase flow system was investigated numerically for a turbulent mixed convection flow. The analysis of conservation equations for a gas-particle flow system was performed on the basis of a two-fluid model from a continuum Eulerian viewpoint. The modified van Driest and Cebeci mixing length turbulence model was adopted in the anaylsis of turbulent flow. In addition, the P-1 approximation was used to evaluate the radiation heat transfer. As expected from the particle concentration and drift velocity distribution, the cumulative collection efficiency E (x) becomes larger when the buoyancy effect increases (i.e. higher Grashof number), while smaller as the radiation effect increases (i.e. higher optical thickness).

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권3호
• /
• pp.509-515
• /
• 2004

The PIV(Particle Image Velocimetry) with liquid crystal tracers is used for visualizing and analysis of the mixed convection in the parallel plates with the upper part cooled and the lower part heated. It is found that the flow pattern of mixed convection in the parallel plates can be classified into three patterns which was affected by Reynolds number. Also, the periodic nature is confirmed, and visualized in experiment.

• Asian-Australasian Journal of Animal Sciences
• /
• 제23권4호
• /
• pp.475-482
• /
• 2010

Thirty-six Najdi ram lambs, weighing an average of 24 kg and circa 3 months old, were utilized in this trial to evaluate the effects of various alfalfa hay particle lengths in the diet on growth performance, digestion coefficients, nitrogen retention and carcass characteristics. Lambs were randomly allotted to three dietary treatments: 9.5 and 14 mm diets, where alfalfa hay was processed to 9.5 and 14 mm particle lengths, respectively, mixed with 3 parts of concentrate and pelleted as a total mixed ration (TMR), and long hay diet, where one part of loose alfalfa hay (17.8${\pm}$2.4 cm) was offered in combination with 3 parts of only-concentrate pellet. All dietary treatments were homogeneous in their ingredient composition. All lambs were slaughtered after a 14-week feeding trial. Although the results showed no significant effect of hay particle length on DMI, TDN and DCP, lambs fed the 9.5 mm pelleted diet had higher (p<0.05) final body weight, ADG, gain efficiency and nitrogen retention than lambs fed the 14 mm and long hay diets. Altering the particle length of alfalfa hay in diets did not affect the digestibility of DM or CP, whereas digestibilities of ADF and NDF were 3.7% and 5.4% higher (p<0.05), respectively, for the long hay diet versus the 9.5 mm pelleted diet. Hot carcass weight, percentage of separable lean from the $9-11^{th}$ rib joint, and percentages of protein and EE in the separable lean increased (p<0.05) as the particle length of alfalfa hay in the diet decreased. Under the conditions of this study, the reduction of particle length in the TMR played an important role in enhancing performance without altering DM consumption, and this may lead to more efficient productivity of lamb fattening compared with longer chopping lengths.

• Asian-Australasian Journal of Animal Sciences
• /
• 제16권12호
• /
• pp.1755-1762
• /
• 2003

Two experiments were conducted to determine effects of particle size in total mixed ration (TMR) on performance of lactating cows. Three rumen cannulated Holstein cows were used in a $3{\times}3$ Latin square design for the metabolic experiment. The particle size of the diets was determined using the Penn State Particle Size Separator (PSPSS) and weighing the proportion of sample remaining on the top screen (19 mm diameter). The 3 treatments were short, medium or long diets (4.9, 24.2 and 27.8% of sample remaining on the top screen of the PSPSS, respectively). Nine farms in the Edmonton area were surveyed and the farms were placed into groups based on the particle size of the ration fed. The groups were short ${\leq}6%$, medium 7-12% and long ${\geq}13%$ of sample weight remaining on the top screen of the PSPSS. Dry matter intake was greater (p=0.07) for the medium diet than the long diet in the metabolic study and resulted in a higher (p=0.07) efficiency of milk production. On the commercial farms, a significantly (p=0.002) lower milk fat percentage was observed for the long diet compared to the short diet. The results of these studies confirm that forage particle size influences milk composition and milk fat was negatively correlated to TMR particle size.

• Journal of the Korean Wood Science and Technology
• /
• 제20권2호
• /
• pp.9-22
• /
• 1992

The aim of this research was to investigate physical and mechanical properties of various composition panels, each fabricated with a ratio of fiber to particle of 2 to 10. Type A consisted of fiber-faces and particle-core in layered-mat system. Type B consisted of fiberboard-faces on particleboard-core. Type C consisted of fibers and particles in mixed-mat system. The results obtained from tests of bending strength, internal bond, screw holding strength and stability were as follows: 1. The bending strength and internal bonding of both the Type A panel and the Type B panel were higher than those of the Type C panel and three-layered particle board. 2. The mechanical properties of the Type C panel showed the lowest values of all composition methods. It seems that the different compression ratios of the particle and fiber interrupted the densification of the fibers when hot pressed. 3. The dimensional stability of layered-mat system panels consising of fiber-faces and particle-core was better the than control particleboard. 4. In composition methods of particle and fiber, layered-composition method was more resonable than mixed-composition. The Type B panel had the highest mechanical properties of all the composition types. 5. The Type A panel was considered the ideal composition method because of its resistance to delamination between the particle-layer and the fiber-layer and because of its lower adhesive content and more effective manufa cturing process.

• 한국응용과학기술학회지
• /
• 제21권3호
• /
• pp.259-266
• /
• 2004

Film properties of monodispersed model composite latexes with particle size of 190 nm, which consist of n-butyl acrylate as a soft phase monomer and methyl methacrylate as a hard phase monomer with different morphology was examined. Five different types of model latexes were used in this study such as random copolymer particle, soft-core/hard-shell particle, hard-core/soft-shell particle, gradient type particle, and mixed type particle. Tensile strength and tensile elongation at break of final films were evaluated. Those properties can be interpreted in terms of PBA/PMMA phase ratio and their morphology. The interfacial adhesion strength was also evaluated using $180^{\circ}$ peel strength measurement and cross hatch cutting test.

• 한국추진공학회지
• /
• 제16권6호
• /
• pp.9-15
• /
• 2012

추력변화를 초공동 수중운동체의 추진체로 사용되는 수반응성 금속입자와 해수는 연소챔버 내에서 균질하게 혼합될 때 비추력이 극대화 된다. 본 연구의 목적은 상사성의 관점에서 분사기 형상이 입자 분포에 미치는 영향을 알아보는 것이다. 이를 위해 PIV기법을 이용하여 반경방향의 입자 분포와 입자 평균속도의 상사성에 대하여 알아보았다.

• 한국세라믹학회지
• /
• 제26권5호
• /
• pp.637-644
• /
• 1989

Beta-sialon powder(Z=1) was synthesized by the simultaeous reduction and nitridation of the mixed powders of Hadong kaolin and silica. Silicon hydroxide was prepared from Si-alkoxide by a hydrolysis method and amorphous silica was obtained from the calcination of the prepared silicon hydroxide. Hadong kaolin was mixed with both the silicon hydroxide and amorphous silica, respectively. The average particle size was 4${\mu}{\textrm}{m}$ and the morphology of particle was rod-like and equiaxed in the case of beta-sialon powder prepared form Hadong kaolin and silicon hydroxide(COMPOSITION A), whereas the average particle size was 3${\mu}{\textrm}{m}$ and the morphology of particle was equiaxed in the case of beta-sialon powder prepared from Hadong kaolin and amorphous silica(COMPOSITION B). The synthesized beta-sialon powders were hot-pressed at 175$0^{\circ}C$ for 2 hours under 30 MPa in a nitrogen atmosphere after YAG composition(8wt%) was added to these powders as a sintering agent. The hot-pressed specimens were annealed a 140$0^{\circ}C$ for 4 hours in a nitrogen atmosphere. The mechanical properties of sintered bodies were investigated in terms of M.O.R., fracture toughness and hardness. The measured values are as follows. COMPOSITION A : M.O.R. 508MPa, KIC 3.5MN/m3/2, hardness 13.6GPa. COMPOSITION B : M.O.R. 653MPa, KIC 5.4MN/m3/2, hardness 13.5GPa.

• 한국분무공학회지
• /
• 제7권2호
• /
• pp.7-15
• /
• 2002

A particle flow visualization, electrostatic charging measurement and separation of triboelectrically charged particles in the external electric field by a fluidized bed tribocharger are conducted for the removal of PVC particles from mixed waste plastics. The laboratory-scale triboelectrostatic separation system consists of the fluidized bed tribocharger, a separation chamber, a collection chamber and a controller. PVC and PET particles can be imparted negative and positive surface charges respectively due to the difference of triboelectric charging series between particles and particles in the fluidized bed tribocharger, and can be separated by passing them through an external electric field. To visualize these charged particles, He-Ne laser is used with cylindrical lenses to generate a sheet beam. In the charging measurement, the particle motion analysis system (PMAS), capable of determining particle velocity and diameter. is used to non-intrusively measure particle behavior in high strength electric field. The average charge-to-mass ratios of PVC and PET particles are $1.4\;and\;1.2{\mu}C/kg$, respectively. The highly concentrated PVC (91.9%) can be recovered with a yield of about 96.1% from the mixture of PVC and PET materials for a single-stage processing. The triboelectrostatic separation system using the fluidized tribocharger shows the potential to be an effective method for removing PVC from mixed plastics for waste plastic recycling.

• 한국분말재료학회지
• /
• 제22권2호
• /
• pp.111-115
• /
• 2015

This study investigates the microstructure and thermal shock properties of polycrystalline diamond compact (PDC) produced by the high-temperature, high-pressure (HPHT) process. The diamond used for the investigation features a $12{\sim}22{\mu}m$- and $8{\sim}16{\mu}m$-sized main particles, and $1{\sim}2{\mu}m$-sized filler particles. The filler particle ratio is adjusted up to 5~31% to produce a mixed particle, and then the tap density is measured. The measurement finds that as the filler particle ratio increases, the tap density value continuously increases, but at 23% or greater, it reduces by a small margin. The mixed particle described above undergoes an HPHT sintering process. Observation of PDC microstructures reveals that the filler particle ratio with high tap density value increases direct bonding among diamond particles, Co distribution becomes even, and the Co and W fraction also decreases. The produced PDC undergoes thermal shock tests with two temperature conditions of 820 and 830, and the results reveals that PDC with smaller filler particle ratio and low tap density value easily produces cracks, while PDC with high tap density value that contributes in increased direct bonding along with the higher diamond content results in improved thermal shock properties.