• 동력기계공학회지
• /
• 제9권2호
• /
• pp.33-39
• /
• 2005

Experiments are performed to study the mixed convection flow and heat transfer in an inclined parallel plates with the upper part cooled and the lower part heated uniformly. The Reynolds number ranges from $4.0{\times}10^{-3}\;to\;6.2{\times}10^{-2}$, the angle of inclination, ${\theta}$, from 0 to 45 degree from the horizontal line, and Pr of the high viscosity fluid is 909. In this paper, the PIV(Particle image velocimetry) with TLC(Thermo-sensitive liquid crystal) tracers is used for visualizing and analysis. This method allows simultaneous measurement of velocity and temperature field at a given instant of time. Quantitative data of the temperature and velocity are obtained by applying the color-image processing to a visualized image, and neural network is applied to the color-to-temperature calibration. This paper describes the methods, and presents the quantitative visualization of mixed convection. From this study, it is found that the flow pattern can be classified into three patterns which are affected by Reynolds number and the angle of inclination.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.491-496
• /
• 2001

In recent years, the research and development about the new material proceed rapidly and actively in the building industry. As building structures become bigger, higher and more specialized, so does the demand for material with higher strength. In the future, we will need to research repair and rehabilitation to make high strength concrete mixed steel fibrous building safe. The carbon fiber reinforced plastic bonding method is widely used in reinforcing the existing concrete structure among the various methods. The repair of initiate loaded reinforced high-strength concrete beams mixed steel fibrous with epoxy bonded Carbon Fiber Sheets(CFS) was investigated experimentally. The CFS thickness and length were varied to assess the peel failure at the curtailment of CFS, The behaviour of the repaired beams was represented by load-longitudinal steel strain relation and failure modes were discussed. The test results indicate that CFS is very effective for strengthening the demand beams and controlling deflections of reinforced high strength concrete beams mixed steel fibrous happen diagonal crack, the increase in the number of CFS layers over two layers didn't effect the increase in the strength of beams.

• Journal of Electrical Engineering and Technology
• /
• 제12권6호
• /
• pp.2187-2195
• /
• 2017

In order to solve the AC optimal power flow (OPF) problem considering the generators' on/off status, it is necessary to model the problem as mixed-integer nonlinear programming (MINLP). Because the computation time to find the optimal solution to the mixed-integer AC OPF problem increases significantly as the system becomes larger, most of the existing solutions simplify the problem either by deciding the on/off status of generators using a separate unit commitment algorithm or by ignoring the minimum output of the generators. Even though this kind of simplification may make the overall computation time tractable, the results can be significantly erroneous. This paper proposes a novel algorithm for the mixed-integer AC OPF problem, which can provide a near-optimal solution quickly and efficiently. The proposed method is based on a combination of the outer approximation method and the relaxed AC OPF theory. The method is applied to a real-scale power system that has 457 generators and 2132 buses, and the result is compared to the branch-and-bound (B&B) method and the genetic algorithm. The results of the proposed method are almost identical to those of the compared methods, but computation time is significantly shorter.

• Structural Engineering and Mechanics
• /
• 제56권4호
• /
• pp.589-603
• /
• 2015

The mixed-mode stress intensity factors of 2-D angled cracks are evaluated by Petrov-Galerkin natural element (PG-NE) method in which Voronoi polygon-based Laplace interpolation functions and CS-FE basis functions are used for the trial and test functions respectively. The interaction integral is implemented in a frame of PG-NE method in which the weighting function defined over a crack-tip integral domain is interpolated by Laplace interpolation functions. Two Cartesian coordinate systems are employed and the displacement, strains and stresses which are solved in the grid-oriented coordinate system are transformed to the other coordinate system aligned to the angled crack. The present method is validated through the numerical experiments with the angled edge and center cracks, and the numerical accuracy is examined with respect to the grid density, crack length and angle. Also, the stress intensity factors obtained by the present method are compared with other numerical methods and the exact solution. It is observed from the numerical results that the present method successfully and accurately evaluates the mixed-mode stress intensity factors of 2-D angled cracks for various crack lengths and crack angles.

• Archives of Reconstructive Microsurgery
• /
• 제23권1호
• /
• pp.1-7
• /
• 2014

Purpose: Recent studies have reported on application of fibrin glue composed of fibrinogen and thrombin to nerve anastomosis, which can be another candidate for vessel anastomosis. However, no research regarding the risk and effectiveness of thrombin in microvascular free tissue transfer has been reported. Therefore, the aim of study is to determine the risk and effectiveness of thrombin on microvascular free tissue transfer through clinical cases. Materials and Methods: Twenty-five patients underwent free flap reconstruction for soft tissue defect or bone exposure in our institute from March 2011 to February 2014. In the group using thrombin, dissolved powder thrombin (5,000 IU/amp) was mixed with 10 mL normal saline. Saline mixed with thrombin was applied on the flap, recipient, and around vessel anastomosis. In the control group, free flap was performed using the same method, except using thrombin. We analyzed the results between the two groups. Results: All flaps survived. The group using thrombin included 14 patients and the control group included 11 patients. Hematoma was found in two cases, respectively, in each group. The group using thrombin showed lower incidence of hematoma than the control group. No difference in survival rate of the flap was observed between the thrombin group and the control group. Conclusion: Results of this study showed that use of saline mixed with thrombin in free tissue transfer may be safe and effective for prevention of hematoma formation in the recipient site.

• 한국도로학회논문집
• /
• 제19권3호
• /
• pp.65-70
• /
• 2017

PURPOSES : Pavement Management System contains the data that describe the condition of the road. Under limited budget, the data can be utilized for efficient plans. The objective of this research is to develop a mixed integer program model that maximizes remaining durable years (or Lane-Kilometer-Years) in road maintenance planning. METHODS : An optimization model based on a mixed integer program is developed. The model selects a cluster of sectors that are adjacent to each other according to the road condition. The model also considers constraints required by the Seoul Metropolitan Facilities Management Corporation. They select two lanes at most not to block the traffic and limit the number of sectors for one-time construction to finish the work in given time. We incorporate variable cost constraints. As the model selects more sectors, the unit cost of the construction becomes smaller. The optimal choice of the number of sectors is implemented using piecewise linear constraints. RESULTS : Data (SPI) collected from Pavement Management System managed by Seoul Metropolitan City are fed into the model. Based on the data and the model, the optimal maintenance plans are established. Some of the optimal plans cannot be generated directly in existing heuristic approach or by human intuition. CONCLUSIONS:The mathematical model using actual data generates the optimal maintenance plans.

• 대한화학회지
• /
• 제33권6호
• /
• pp.596-600
• /
• 1989

25${\circ}$C, 용액의 이온세기 ${\mu}$= 1.0($NaNO_3$) 및 pH 8.0인 조건하에서 카드뮴 -Oxalate-Citrate계의 단일 및 혼합 리간드 착물에 관한 연구를 미분펄스폴라로그라피적으로 수행하였다. DeFord-Hume 및 Schaap-McMasters의 도표법을 이용하여 단일 및 혼합 리간드 착물의 안정도상수 값을 구하였다. $log\beta_{11}$, $log\beta_{12}$ 및 $log\beta_{21}$값은 각각 4.91, 4.99와 5.18이었으며 이들 값으로부터 혼합 리간드 착물계의 여러 평형관계 등을 논의하였다.

• Applied Biological Chemistry
• /
• 제19권4호
• /
• pp.183-188
• /
• 1976

농가에서 감자를 쉽게 절단 변색처리하여 주식으로 흔취 할 수 있는 감자쌀의 제조방법을 확정하기, 위한 예비시험으로서 감자의 절단 모양과 크기, 감자쌀의 혼취 기호성 및 적정 혼취량을 연구하여 다음과 같은 결과를 얻었다. 1. 건조 감자쌀을 위한 생감자의 모양은 장방형보다 원통형이 좋고 직경 6mm내외, 길이 $10{\sim}13mm$의 크기가 적당하였다. 2. 감자쌀을 혼취한 쌀밥은 백미 쌀밥보다 기호도가 약간 높으며 30%가 가장 좋았다. 3. 감자쌀과 기타 잡곡 혼취 쌀밥의 대비 식미시험 결과는 혼취량에 따라 다르나 대체로 감자 혼취 쌀밥이 좋았다.

• Structural Engineering and Mechanics
• /
• 제34권5호
• /
• pp.563-580
• /
• 2010

Composite beams using bolts to attach steel plates to the side faces of existing reinforced concrete (RC) coupling beams can enhance both their strength and deformability. The behavior of those composite beams differs substantially from the behavior of typical composite beams made up of steel beams and concrete slabs. The former are subjected to longitudinal, vertical and rotational slips, while the latter only involve longitudinal slip. In this study, a mixed analysis method was adopted to develop the fundamental equations for accurate prediction of the load-carrying capacity of steel plate strengthened RC coupling beams. Then, a rigid plastic analysis technique was used to cope with the full composite effect of the bolt group connections. Two theoretical models for the determination of the strength of medium-length plate strengthened coupling beams based on mixed analysis and rigid plastic methods are presented. The strength of the strengthened coupling beams is derived. The vertical and longitudinal slips of the steel plates and the shear strength of the anchor-bolt connection group is considered. The theoretical models are validated by the available experimental results presented in a companion paper. The strength of the specimens predicted from the mixed analysis model is found to be in good agreement with that from the experimental results.

• Journal of Power Electronics
• /
• 제16권1호
• /
• pp.27-37
• /
• 2016

In this paper, a mixed algorithm is proposed to overcome the limitations of the conventional algorithms, which cannot be applied in various driving patterns of drivers. The proposed algorithm based on the coulomb counting method is mixed with reset algorithms that consist of the enhanced OCV reset method and the DCIR iterative calculation method. It has many advantages, such as a simple model structure, low computational overload in various profiles, and a low accumulated SOC error through the frequent SOC reset. In addition, the enhanced parameter based on a mathematical analysis of the second-order RC ladder model is calculated and is then applied to all of the methods. The proposed algorithm is verified by experimental results based on a 27-Ah LiPB. It is observed that the SOC RMSE of the proposed algorithm decreases by about 9.16% compared to the coulomb counting method.