• Journal of Advanced Marine Engineering and Technology
• /
• 제35권7호
• /
• pp.899-906
• /
• 2011

Generally, load conditions of machine or structure in fatigue destruction is occurred not under single load conditions but under mixed load conditions. However, the experiment under mixing mode is insufficient because of no having test standard to the behavior of crack under mixing mode and variety of test methods, and many tests are required. In this paper measured crack direction path by created figure capture system when a experiment. Also, we studied by comparison the behavior of crack giving the change of stress ratio and inserting beach mark. Through the test under mixing mode, advancing path of crack is indicated that advancing inclined angle ${\Theta}$ (direction of specimen length) has increased depending on the increase of mixed mode impaction. It is indicated that according to the increase of mixed mode loading condition impaction under mixing mode, advancing speed of crack gets slow. Also, we found that inner crack(cross section of specimen) is progressed more rapidly than outer crack based on data through beach mark.

• 펄프종이기술
• /
• 제43권4호
• /
• pp.1-10
• /
• 2011

Beating or refining is an energy intensive process in paper industry. In India, most of the paper industries blend long fibered softwood pulps with short fibered hardwood or agro based pulps to get the paper properties of competitive level. Refining characteristics of the blend of pulps is very crucial with respect to freeness and strength properties. This study has been carried out to understand the refining behavior of three hardwood pulps and a softwood pulp. The hardwood and softwood pulps are blended in different proportions in two different ways; a) blending after their separate refining, and b) blending before refining followed by mixed refining of the blended pulps. Freeness of pulp, strength, optical and surface properties of paper along with formation have been determined and compared for both the refining methods. The fiber classification of refined pulps was also carried out to analyze the effect of refining method on fiber morphology. The mixed refining of hardwood and softwood pulps marginally affects the fiber morphology in comparison to separate refining of pulps. The strength and other properties of paper prepared from mixed refining of pulps are either better or comparable than those of separately refined pulps.

• 한국주거학회논문집
• /
• 제24권6호
• /
• pp.81-92
• /
• 2013

Recently, the interest in the mixed-use development of various urban planning facilities has been increased, but the interest in the Mixed-use development of bus depots that is closely related to our daily life is insufficient circumstance so far. Accordingly, this study aims to realize the necessity for the mixed-use development of bus depots as methods to improve the living environment and use efficiently the land, and to suggest reasonable development directions by analyzing their physical character after classifying bus depots according to their position in the residential area. As the results of study, bus depots have different properties according to their position in residential area and have the problem of space shortage. Also, many things such as location of entrances, the finish method of edge of bus depot's area are affected by the surrounding environment. So development plan to consider the each condition is required.

• Korean Chemical Engineering Research
• /
• 제56권2호
• /
• pp.269-274
• /
• 2018

All the $Ni-Co-Ce-ZrO_2$ mixed oxides are prepared by co-precipitations methods. Methanation of CO and $H_2$ reaction is screened tested over different fractions of cerium (2, 4, 7 and 12 wt.%) over $Ni-Co/ZrO_2$ bimetallic catalysts are investigated. The mixed oxides are characterized by XRD, CO-Chemisorption, TGA and screened methanation of CO and $H_2$ at $360^{\circ}C$ for 3000 min on stream at typical ratio $CO:H_2=1:1$. In $Ni-Co/CeZrO_2$ series 2 wt.% Ce loading catalyst shows most promising catalyst for $CH_4$ selectivity than $CO_2$, which directs more stability with less coke formation. The high activity is attributed to the better bimetallic synergy and the well-developed crystalline phases of NiO, $ZrO_2$ and $Ce-ZrO_2$. Other bimetallic mixed oxides NCoZ, $NCoC^{4-12}Z$ has faster deactivation with low methanation activity. Finally, 2 wt.% Ce loading catalyst was found to be optimal coke resistant catalyst.

• 한국조경학회지
• /
• 제29권6호
• /
• pp.72-81
• /
• 2002

The purpose of this study is to determine the impact of the soil load for artificial ground on a building's structural expenses. Three types of soil - 100% soil, soil mixed with 50% perlite, and 100% artificial soil - were used for this study. A one story concrete steel building specific to each soil load was designed, and then, the cost of steel and concrete used for the design was estimated. As the result of this study, the structural expenses in the case of 5:5 mixed soil can be reduced about 17% compare with 100% soil. Using artificial soil, the structural expenses can be cut about 32% compare to 100% soil and about 12% less when 5:5 mixed soil is used. However, considering total expense which includes the structural expense and soil expense, the expense of 5:5 mixed soil have an increase 25% compared with 100% soil. In the artificial soil, the total expense is 45% more expensive than 100% soil and 17% higher when 5:5 mixed soil is used because of the high unit price of artificial soil. This study expected substantial savings in structural cost as the soil-load was lightened. But, savings were significantly reduced because the unit price of the artificial soil is much more expensive than the price of the natural one. Therefore, further research on methods of reducing the unit price of the artificial soil should be conducted in order to extend green space on to artificial ground.

• 대한한방내과학회지
• /
• 제40권3호
• /
• pp.557-565
• /
• 2019

Objectives: This study investigated the effect of local acupuncture point stimulation and the application of a topical herbal mixed heating cream in a chronic cough patient who had not responded to various medications for more than a few months. Methods: An 81 year-old female patient who was suspected to be suffered from Upper Airway Cough Syndrome (UACS) was examined. The patient was treated with local acupuncture point stimulation and the application of a topical herbal mixed heating cream. We used the Leicester Cough Questionnaire, Cough-Specific Quality-of-Life Questionnaire, and Verbal Numerical Rating Scale to assess the patient's respiratory symptoms. Results: Local acupuncture point stimulation and the application of a topical herbal mixed heating cream resulted in the improvement of cough symptoms. The quality of life due to the alleviation of symptoms also significantly improved. Adverse effects were not observed. Conclusions: This study suggests that local acupuncture point stimulation and the application of a topical herbal mixed heating cream may be an effective therapy for the treatment of chronic cough in patients with UACS.

• 한방안이비인후피부과학회지
• /
• 제34권4호
• /
• pp.171-180
• /
• 2021

Objectives: The purpose of this study is to report the clinical course of a patient with mixed hemorrhoids treated with Korean medicine alone. Methods: A patient visited for an mixed hemorrhoids was treated with Korean herbal medicine. The effects of the treatment were evaluated via photography of hemorrhoids and symptoms of pain, bleeding, prolapse, itching, discharge and Total Symptom Score(TSS). Results: After treatment, in photography before and after, the size of hemorrhoids was reduced and lost. Scores of Pain (4→0), bleeding (3→0), prolapse (3→2), itching (0→0), discharge (1→0) and TSS (11.5->3) were observed. Conclusion: In light of the reduced size of hemorrhoids and scores of symptoms, herbal medicine might be a possible treatment method on mixed hemorrhoids.

• 국제학술발표논문집
• /
• The 7th International Conference on Construction Engineering and Project Management Summit Forum on Sustainable Construction and Management
• /
• pp.225-234
• /
• 2017

Mixed-reality technologies have proven to be valuable in many architecture, engineering and construction / facilities management (AEC/FM) applications. However, its potential of being adapted to facilitate hazard identification and risk communication in construction workplaces has yet to be fully explored. This paper makes an attempt to evaluate the feasibility of applying mixed-reality to enhancing safety risk communication in construction workplaces. Experiments have been designed in which Microsoft HoloLens^® together with a developed application will be used to intervene in the practice of jobsite risk communication. A cross-sectional survey will then be followed to examine the effectiveness and acceptability of this technology through analysis on data collected from participants in the construction industry. The preliminary results show that this emerging HoloLens^® technology, compared to the traditional communication methods (i.e., phone calls, walking up people and talk, and video conferencing), facilitates accurate, prompt safety communication on construction sites. Such findings signify the potential of applying mixed-reality to safety performance enhancement in the construction industry.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2015년도 춘계학술대회
• /
• pp.281-284
• /
• 2015

디지털 영상 처리는 메모리 소자 등의 급속한 진보에 의해 다양한 응용 분야에 실용화되고 있다. 그러나 영상 처리 과정에서 여러 가지 원인에 의해 잡음이 발생하고 있으며, 잡음들을 제거하기 위한 다양한 방법들이 연구되고 있다. 일반적으로, 영상은 서로 다른 특성을 갖는 복합잡음에 의해 손상된다. 본 논문에서는 영상에 첨가된 복합잡음의 영향을 완화하기 위해, 잡음 형태에 따라 처리하는 필터 알고리즘을 제안하였다. 그리고 객관적 판단을 위해 기존의 방법들과 비교하였으며, 판단의 기준으로 PSNR(peak signal to noise ratio)을 사용하였다.

• 품질경영학회지
• /
• 제46권1호
• /
• pp.27-38
• /
• 2018

Purpose: A large number of attributes with mixed levels are often considered in the conjoint analysis. In the cases where attributes have two or three levels, we research on the efficient design of survey questionnaire to estimate all the main effect and two factor interaction effects with a reasonable size of it. Methods: To reduce the number of questions in a questionnaire, the balanced incomplete block mixed level factorial design with minimum aberration was proposed by Lim and Chung (2016). Based on the number of questions and that of the respondents in that design, D-optimality criterion is adopted to find efficient designs where the main effect and two factor interaction effects are estimated. Results: The list of the number of questions and that of the respondents in efficient designs for survey questionnaire are recommended based on the D-efficiency of each design and the proposed selection criteria for the number of both questions and the respondents. By analyzing all the respondents survey data generated by the simulation study, we find the proper model. Conclusion: The proposed methods of designing survey questionnaires seem to perform well in the sense that how often the proper model is found in a simulation study where all the respondents survey data are generated by the simulation model.