• Journal of Korea Multimedia Society
• /
• v.15 no.8
• /
• pp.963-976
• /
• 2012

'Gesture' except for voice is the most intuitive means of communication. Thus, many researches on how to control computer using gesture are in progress. User detection and tracking in these studies is one of the most important processes. Conventional 2D object detection and tracking methods are sensitive to changes in the environment or lights, and a mix of 2D and 3D information methods has the disadvantage of a lot of computational complexity. In addition, using conventional 3D information methods can not segment similar depth object. In this paper, we propose object detection and tracking method using Depth Projection Map that is the cumulative value of the depth and motion information. Simulation results show that our method is robust to changes in lighting or environment, and has faster operation speed, and can work well for detection and tracking of similar depth objects.

• Journal of the Korea Institute of Building Construction
• /
• v.8 no.4
• /
• pp.79-85
• /
• 2008

The purpose of this study is to evaluate the mix design of pH reducing cement concrete which can be used for environment-friendly concrete. Cement pastes and concretes are prepared with water-binder ratios and various admixtures such as blast-furnace slag, fly ash and recycled cement, and tested for compressive strength and pH. pH is measured through pore solution expressed from hydrated cement paste by special apparatus. From the test results, regardless of water-binder ratio, The pH of expressed pore solution from hydrated cement paste which is made of ordinary portland cement with blast-furnace slag, fly ash is decreased with increasing of admixtures content, and compressive strength is also slightly improved. The compressive strength of cement paste made of recycled cement which is burnt at $1000^{\circ}C$, for 2 hours is considerably increased compared with that of none-burnt recycled cement due to restoration of hydraulic property, but pH is a little higher. Porous concrete with ordinary portland cement has high pH in the range of 12.22 to 12.59, however, that is reduced to the range of 8.95 to 10.39 by carbonation at the surface of porous concrete. The pH reduction of porous concrete is possible by various admixture addition, however their degrees are very slight. Therefore, to reduce the pH considerably, carbonation method of porous concrete is better in pH reduction methods for plant survival condition of pH of 9.0 or less. In this study, it is apparent that pH for the environment-friendly porous concrete products used in the construction field can be suppressed by this carbonation method and various admixtures addition.

• Journal of Environmental Science International
• /
• v.27 no.3
• /
• pp.219-225
• /
• 2018

This study was conducted to investigate the possibility of utilizing various types of nozzles and gas-liquid mixers to increase the dissolution rate of plasma gas containing ozone generated in a dielectric barrier plasma reactor. After selecting the air atomizing nozzle with the highest gas dissolution rate among the 13 types of test equipment, we investigated the influence of the operating factors on the air atomizing nozzle to determine the optimal plasma gas dissolution method. The gas dissolution rate was measured by a simple and indirect method, specifically, the measurement of KLa instead of direct measurement of ozone concentration, which requires a longer analysis time. The results showed that the KLa value of the simple mix of air and water was $0.372min^{-1}$, Which is 1.44 times higher than that ($0.258min^{-1}$) of gas emitted from a normal diffuser. Among the nozzles of the same type, the KLa value was highest for the nozzle having the smallest orifice diameter. Among the 13 types of devices tested, the nozzle with highest KLa value was the M22M nozzle, which is a gas-liquid spray nozzle. The relationship between water circulation flow rate and KLa value in the experimental range was linear. The air supply flow rate and KLa value showed a parabolic-type correlation, while the optimum air supply flow rate for the water circulation flow rate of 1.8 L / min is 1.38 times.

• Journal of KIISE
• /
• v.43 no.2
• /
• pp.212-221
• /
• 2016

Android apps suffer from intent vulnerabilities in that they abnormally stop execution when Android components such as, activity, service, and broadcast receiver, take malformed intents. This paper proposes a method to prevent intent vulnerabilities by allowing programmers to write a specification on intents that a component expects to have, and by checking intents against the specification in runtime. By declaring intent specifications, we can solve the problem that one may miss writing conditional statements, which check the validity of intents, or one may mix those statements with another regular code, so making it difficult to maintain them. We perform an experiment by applying the proposed method to 7 Android apps, and confirm that many of abnormal termination of the apps because of malformed intents can be avoided by the intent specification based runtime assertion.

• Journal of the Korean Geotechnical Society
• /
• v.27 no.12
• /
• pp.53-68
• /
• 2011

This paper presents the fundamental parameters for designing the NATM Composite Lining to be used in NATM tunnel construction. Firstly, the concept of NATM Composite Lining behaviour is introduced and reviewed in construction-performance. For the fundamental study, the optimal mix ratio tests and backfill material property tests to develop high-quality composite lining (PC panel lining) are fundamentally carried out. And the light-weight foamed mortar which is used for backfill material is developed. Full-scale loading tests to verify a performance of the NATM Composite Lining is also performed. From this research, it is clearly found that the NATM Composite Lining is very applicable method to considerably increase the stability and constructability of tunnel structure.

• Health Policy and Management
• /
• v.16 no.1
• /
• pp.17-40
• /
• 2006

With the prospect of rapidly growing health insurance expenditures, particularly spending for ambulatory care, the introduction of a case-based payment method is discussed as an alternative to the current fee-for-service based method. A system to measure case mixes of providers is a core component of such payment systems. The objective of this study were to develop a classification system for ambulatory care, Korean Ambulatory Patient Group (KAPG) based on the U.S. APG version 2.0 and to evaluate the classification accuracy of the system. A database of 64,258,386 records was constructed from insurance claims submitted to the Health Insurance Review Agency (HIRA) during three months from August 2002. A total of 41,347,307 records with a single visit was used for the development and 7% random sample of the database was used for the evaluation. Additional groups were defined to include both physician and hospital fees in the classification, age splits were added to classify the entire population as well as the population older than 65, and the definition of medical groups used by the HIRA was adopted. The variance reduction in charges achieved by KAPGs was computed to evaluate the accuracy of classification. A total of 474 KAPGs was defined compare to 290 groups in the U.S. APG. The variance reduction for charges of all visits ranged from 20% to 37% depending on the type of provider, and ranged from 22% to 42% for non-outliers, that were better than those achieved by the system currently used by the .HIRA for its internal review purpose. Although further study is required to improve the classification for complicated care in larger hospitals, the results indicated that KAPGs could be used for better management of costs for ambulatory care.

• Cartoon and Animation Studies
• /
• s.41
• /
• pp.57-73
• /
• 2015

A pose is an important component in the animation with timing and spacing. Pose is the key to describe the story-telling or how the animation behavior. Key animation method is Straight Ahead and pose to pose method. Many animaters have been using these two methods, or by a mix of two ways. It is possible that computer animation make a pose using interpolation between keyframes. The many animators of computer animation are using pose to pose in their work. It is depend on good and strong pose that make audience understand a story or a situation. This makes animators to be efficient of inefficient operation. In this study, according to the effective good pose to catch proposes four ways. There are four methods of making pose that are stretch and squash, the height of the character, the center of weight, step. The law of 12 kinds of Disney Animation is a good reference for the study.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.1101-1104
• /
• 2008

Recently, active researches are conducted on high performance concrete(HPC) exhibiting high strength and high fluidity. These researches are resulting in increased applications on real structures. In order to satisfy the required performances, HPC makes use of large quantities of binder and presents low water-cementitious material ratio. Such mixing is increasing significantly the autogenous shrinkage, which subsequently is likely to favor the potential development of cracks. Therefore, we investigated the effect of used materials and mix proportions on the shrinkage properties of HPC, and of the use of expansive additives and shrinkage reducing agents on the HPC. The autogenous shrinkage of HPC using blast furnace slag are tend to be increased, in some case have the potential development of cracks by only the autogenous shrinkage. Also the using method in combination with expansive additive and shrinkage reducing agent is more effective than the separately using method of that.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.4
• /
• pp.396-403
• /
• 2016

This study is based on the evaluation of a single component injection type adhesive repair material and a new 2 component type used in leakage of underground concrete structures. The studies showed that based on different mix ratio of the 2 component type adhesive sealant comprised of an asphalt main and latex mixture agent the viscosity of the material compound differed significantly. Based on a permeability testing, injection and economic efficiency, and performance, the appropriate ratio was determined to be 6:1 and was proceeded to the KS F 4935 evaluation method. The 2 component type adhesive sealant uses a static mixer and a cartridge type container for the injection procedure and was able to satisfy the evaluation criteria outlined in the KS F 4935 standard.

• Journal of Energy Engineering
• /
• v.24 no.1
• /
• pp.164-171
• /
• 2015

Although coal-fired power generation has played a role as base load unit, it has incurred various social costs in the process of generating and providing electricity. It is necessary to extend the proportion of low-carbon power generations, and reduce the ratio of coal-fired power generation to cope with global climate changes. This study, therefore, attempts to estimate the public's willingness-to-pay (WTP) for substitution of supplied electricity from hydro-electricity generation, a representative renewable energy, for coal-fired power generation. To this end, we apply the contingent valuation (CV) method, widely used technique when valuing non-market goods, to elicit the public's WTP. In addition, a spike model is employed to consider zero WTPs. After the empirical analysis with 1,000 households CV survey data, the results show that mean household's WTP for replacing supplied electricity from hydro-electricity generation with coal-fired power generation is estimated to be about 54 KRW per kWh. The results of this study are expected to contribute to determining energy-mix and provide benefit information of hydro-electricity generation.