• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 춘계 학술논문 발표대회 1부
• /
• pp.131-132
• /
• 2011

This study analyzes the yearly-best delivered size range of truck mixer based on the specified mix, Water to Binder Ratio, aggregate proportion and unit amount with statistical method targeting on Kyeongi and Kyeongsang province and compares with the similar materials of Japan to propose as a basic standard for the quality control of mixer truck. As a result, in case of the Water to Binder Ratio of these areas, it is higher than Japan's due to the excessive safety rate reflecting the changes of differential value impact and unit amount, and the unit amount's standard deviation is very large by reflecting the changes of the amount used and chemical admixture susceptibility. In case of aggregate proportion, the frequency rate is about 50%, which is very similar value with Japan's one.

• Computers and Concrete
• /
• 제20권4호
• /
• pp.381-389
• /
• 2017

The various types of structural materials that are available in the construction industry nowadays make it necessary to predict their stress-strain behavior. Geopolymer are alternatives for ordinary Portland cement concrete that are made from pozzolans activation. Due to relatively new material, many mechanical specifications of geopolymer are still not yet discovered. In this study, stress-strain behavior has been provided from experiments for unconfined geopolymers. Modulus of Elasticity and stress-strain behavior are critical requirements at analysis process and knowing complete stress-strain curve facilitates structural behavior assessment at nonlinear analysis for structures that have built with geopolymers. This study intends to investigate stress-strain behavior and modulus of elasticity from experimental data that belongs for geopolymers varying in fineness and mix design and curing method. For the sake of behavior determination, 54 types of geopolymer are used. Similar mix proportions are used for samples productions that have different fineness and curing approach. The results indicated that the compressive strength ranges between 7.7 MPa and 43.9 MPa at the age of 28 days curing.

• Coupled systems mechanics
• /
• 제8권4호
• /
• pp.289-298
• /
• 2019

Reinforced concrete can be considered as a heterogeneous material consisting of coarse aggregate, mortar mix and reinforcing bars. This paper presents a two-dimensional mesoscopic analysis of reinforced concrete beams using a simple two-phase mesoscopic model for concrete. The two phases of concrete, coarse aggregate and mortar mix are bonded together with reinforcement bars so that inter force transfer will occur through the material surfaces. Monte Carlo's method is used to generate the random aggregate structure using the constitutive model at mesoscale. The generated models have meshed such that there is no material discontinuity within the elements. The proposed model simulates the load-deflection behavior, crack pattern and ultimate load of reinforced concrete beams reasonably well.

• 한국도로학회:학술대회논문집
• /
• 한국도로학회 2002년도 학술발표회 논문집
• /
• pp.75-80
• /
• 2002

• Journal of applied mathematics & informatics
• /
• 제4권1호
• /
• pp.223-234
• /
• 1997

By Stochastic simulations we discuss the fitness of a mix-ture normal distribution to observations from general mixture distribu-tions using the MLE method and the EM algorithm. We calulate the probability of misclassifying objects and estimate the optimal number of mixture components with mutual information measure.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 추계 학술논문 발표대회
• /
• pp.57-58
• /
• 2015

In this research the processing method of Desulfurized Plaster is changed to cyclotomy, 0.3mm sieve analysis and 500℃ heat exposure, and by changing the mix rate of the binding agent to 0~20%, it was applied to mortar that used cyclic aggregate and blast furnace slag for testing. The test results showed that the flow decreased in the order of cyclotomy, high heat exposure, and sieve analysis according to the mix rate of FGD, and while the air volume decreased for cyclotomy, it was shown to have almost no effect on sieve analysis and high heat exposure. The setting time accelerated as the mixing rate of FGD increased, and the compression strength increased as the mixing rate of FGD increased and especially showed a high trend with cyclotomy and sieve analysis.

• Computers and Concrete
• /
• 제17권5호
• /
• pp.629-638
• /
• 2016

Optimization of the concrete mixture design is a process of search for a mixture for which the sum of the cost of the ingredients is the lowest, yet satisfying the required performance of concrete. In this study, a statistical model was carried out to model a cost effective optimal mix proportioning of high strength self-compacting concrete (HSSCC) using the Response Surface Methodology (RSM). The effect of five key mixture parameters such as water-binder ratio, cement content, fine aggregate percentage, fly ash content and superplasticizer content on the properties and performance of HSSCC like compressive strength, passing ability, segregation resistance and manufacturing cost were investigated. To demonstrate the responses of model in quadratic manner Central Composite Design (CCD) was chosen. The statistical model showed the adjusted correlation coefficient R2adj values were 92.55%, 93.49%, 92.33%, and 100% for each performance which establish the adequacy of the model. The optimum combination was determined to be $439.4kg/m^3$ cement content, 35.5% W/B ratio, 50.0% fine aggregate, $49.85kg/m^3$ fly ash, and $7.76kg/m^3$ superplasticizer within the interest region using desirability function. Finally, it is concluded that multiobjective optimization method based on desirability function of the proposed response model offers an efficient approach regarding the HSSCC mixture optimization.

• Computers and Concrete
• /
• 제4권4호
• /
• pp.299-316
• /
• 2007

The compressive strength of concrete is a commonly used criterion in producing concrete. However, the test on the compressive strength is complicated and time-consuming. More importantly, since the test is usually performed 28 days after the placement of the concrete at the construction site, it is too late to make improvements if unsatisfactory test results are incurred. Therefore, an accurate and practical strength estimation method that can be used before the placement of concrete is highly desirable. In this study, the estimation of the concrete strength is performed using support vector regression (SVR) based on the mix proportion data from two ready-mixed concrete companies. The estimation performance of the SVR is then compared with that of neural network (NN). The SVR method has been found to be very efficient in estimation accuracy as well as computation time, and very practical in terms of training rather than the explicit regression analyses and the NN techniques.

• 한국건설순환자원학회논문집
• /
• 제9권2호
• /
• pp.167-176
• /
• 2021

순환아스팔트 혼합물은 제조 시 믹서에서 혼합되는 동안 노화된 RAP(회수 아스팔트포장재)을 잘 녹이는 것이 중요하다. 순환아스팔트 혼합물은 모든 재료(RAP, 신규 아스팔트 및 신규 골재)를 동시에 믹서에 넣고 혼합하여 생산한다. 동시 혼합(IM)방법으로 제조된 순환아스팔트 혼합물의 경우 RAP에 포함된 노화된 바인더는 신규 바인더와 혼합되는 동안 적절하게 회생되지 못하기 때문에 동일한 혼합물 내에서 신규 골재 주위에 코팅된 바인더보다 더 높은 산화·노화 수준을 나타내며, 큰 강성을 보인다. 본 연구에서는 RAP의 노화된 바인더를 회생시키기 위해서 단계 혼합(SM) 방법을 적용하였다. 첫 번째 단계에서는 RAP과 신규 아스팔트를 혼합한 다음 두 번째 단계에서는 가열된 신규 골재와 함께 혼합하였다. 혼합 방법에 따른 순환아스팔트 혼합물의 수분저항성 개선효과를 비교하기 위해 간접인장강도(ITS)와 인장강도 비(TSR) 시험을 수행하여 SM 방법과 IM 방법 간에 통계적 t- 테스트를 수행했다. 수분저항성을 평가하기 위해서 세 가지 전처리 조건 즉, -18℃ 동결 후 60℃에서 24 시간 수침, 60℃에서 48 시간 수침 및 60℃에서 72 시간 수침 조건을 적용하였다. SM 방법으로 제조한 순환아스팔트 혼합물의 TSR은 IM 방법에 의한 순환아스팔트 혼합물보다 분명히 높았고, SM 방법의 변동계수는 IM보다 낮았다. 또한 통계적 t-test에 의해 SM 방법의 ITS_WET이 α = 0.05 수준에서 IM과 유의하게 다른 것으로 관찰되었다. 또한, SM 방법의 ITS_WET은 IM과 비교하여 더 가혹한 조건에서 처리할수록 훨씬 개선된 결과를 나타냈다. 따라서 단계 혼합 방법은 기존의 동시 혼합방법으로 생산된 순환아스팔트 혼합물보다 더 높은 수분저항성을 보이고, 보다 더 우수한 순환아스팔트 혼합물을 생산하기 위한 중요한 혼합 방법임을 확인하였다.

• 대한수의학회지
• /
• 제38권4호
• /
• pp.793-802
• /
• 1998

Salmonellosis caused by a number of serotypes of Salmonella is an infectious, acute or chronic, zoonotic disease and characterized by enteritis and diarrhea, septicemia in animal. In these studies we investigated the prevalent serotypes of Salmonella causing animal salmonellosis in Korea and the 71 strains of Salmonella spp. were isolated from materials such as mesenteric lymph nodes, fecal samples from slaughtered animal. With the identification test results, the most prevalent serotypes were, in order, S stanley 31 strains (43.7%), S typhimurium 19 strains (26.8%) and S montevideo 11 strains (15.5%), respectively. And we could establish the method for detection of antibodies to broad variety of Salmonella serotypes. Lipopolysaccharide(LPS) antigen extracted from Salmonella was more sensitive and specific than outer membrane protein antigen from that for detection of Salmonella antibody by using an indirect ELISA. The optimal concentration of antigen was 100ng/ml of LPS, the dilutions of conjugate and serum were 1 : 1,000~2,000 and 1 : 200~400, respectively. The mix LPS-ELISA which was used by mixing LPS from S typhimurium (group B), S choleraesuis (group C) and S enteritidis (group D) were more rapid and effective than that used LPS from individual strain for detection of Salmonella serogroup O4, O7 and O9 antibody at the same time. We could obtain the high values of optical density ($0.73{\pm}0.32$) by mix LPS-ELISA on the farm which had occurred salmonellosis, but very low values of $0.17{\pm}0.06$ on the negative farm of salmonellosis. So, the mix LPS-ELISA may be used to monitor the serological surveillance for the presence of infection with a number of serotypes of Salmonella and would be useful for prevention and control of salmonellosis in animal.