• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2011.05a
• /
• pp.131-132
• /
• 2011

This study analyzes the yearly-best delivered size range of truck mixer based on the specified mix, Water to Binder Ratio, aggregate proportion and unit amount with statistical method targeting on Kyeongi and Kyeongsang province and compares with the similar materials of Japan to propose as a basic standard for the quality control of mixer truck. As a result, in case of the Water to Binder Ratio of these areas, it is higher than Japan's due to the excessive safety rate reflecting the changes of differential value impact and unit amount, and the unit amount's standard deviation is very large by reflecting the changes of the amount used and chemical admixture susceptibility. In case of aggregate proportion, the frequency rate is about 50%, which is very similar value with Japan's one.

• Computers and Concrete
• /
• v.20 no.4
• /
• pp.381-389
• /
• 2017

The various types of structural materials that are available in the construction industry nowadays make it necessary to predict their stress-strain behavior. Geopolymer are alternatives for ordinary Portland cement concrete that are made from pozzolans activation. Due to relatively new material, many mechanical specifications of geopolymer are still not yet discovered. In this study, stress-strain behavior has been provided from experiments for unconfined geopolymers. Modulus of Elasticity and stress-strain behavior are critical requirements at analysis process and knowing complete stress-strain curve facilitates structural behavior assessment at nonlinear analysis for structures that have built with geopolymers. This study intends to investigate stress-strain behavior and modulus of elasticity from experimental data that belongs for geopolymers varying in fineness and mix design and curing method. For the sake of behavior determination, 54 types of geopolymer are used. Similar mix proportions are used for samples productions that have different fineness and curing approach. The results indicated that the compressive strength ranges between 7.7 MPa and 43.9 MPa at the age of 28 days curing.

• Coupled systems mechanics
• /
• v.8 no.4
• /
• pp.289-298
• /
• 2019

Reinforced concrete can be considered as a heterogeneous material consisting of coarse aggregate, mortar mix and reinforcing bars. This paper presents a two-dimensional mesoscopic analysis of reinforced concrete beams using a simple two-phase mesoscopic model for concrete. The two phases of concrete, coarse aggregate and mortar mix are bonded together with reinforcement bars so that inter force transfer will occur through the material surfaces. Monte Carlo's method is used to generate the random aggregate structure using the constitutive model at mesoscale. The generated models have meshed such that there is no material discontinuity within the elements. The proposed model simulates the load-deflection behavior, crack pattern and ultimate load of reinforced concrete beams reasonably well.

• 한국도로학회:학술대회논문집
• /
• 2002.10a
• /
• pp.75-80
• /
• 2002

• Journal of applied mathematics & informatics
• /
• v.4 no.1
• /
• pp.223-234
• /
• 1997

By Stochastic simulations we discuss the fitness of a mix-ture normal distribution to observations from general mixture distribu-tions using the MLE method and the EM algorithm. We calulate the probability of misclassifying objects and estimate the optimal number of mixture components with mutual information measure.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.11a
• /
• pp.57-58
• /
• 2015

In this research the processing method of Desulfurized Plaster is changed to cyclotomy, 0.3mm sieve analysis and 500℃ heat exposure, and by changing the mix rate of the binding agent to 0~20%, it was applied to mortar that used cyclic aggregate and blast furnace slag for testing. The test results showed that the flow decreased in the order of cyclotomy, high heat exposure, and sieve analysis according to the mix rate of FGD, and while the air volume decreased for cyclotomy, it was shown to have almost no effect on sieve analysis and high heat exposure. The setting time accelerated as the mixing rate of FGD increased, and the compression strength increased as the mixing rate of FGD increased and especially showed a high trend with cyclotomy and sieve analysis.

• Computers and Concrete
• /
• v.17 no.5
• /
• pp.629-638
• /
• 2016

Optimization of the concrete mixture design is a process of search for a mixture for which the sum of the cost of the ingredients is the lowest, yet satisfying the required performance of concrete. In this study, a statistical model was carried out to model a cost effective optimal mix proportioning of high strength self-compacting concrete (HSSCC) using the Response Surface Methodology (RSM). The effect of five key mixture parameters such as water-binder ratio, cement content, fine aggregate percentage, fly ash content and superplasticizer content on the properties and performance of HSSCC like compressive strength, passing ability, segregation resistance and manufacturing cost were investigated. To demonstrate the responses of model in quadratic manner Central Composite Design (CCD) was chosen. The statistical model showed the adjusted correlation coefficient R2adj values were 92.55%, 93.49%, 92.33%, and 100% for each performance which establish the adequacy of the model. The optimum combination was determined to be $439.4kg/m^3$ cement content, 35.5% W/B ratio, 50.0% fine aggregate, $49.85kg/m^3$ fly ash, and $7.76kg/m^3$ superplasticizer within the interest region using desirability function. Finally, it is concluded that multiobjective optimization method based on desirability function of the proposed response model offers an efficient approach regarding the HSSCC mixture optimization.

• Computers and Concrete
• /
• v.4 no.4
• /
• pp.299-316
• /
• 2007

The compressive strength of concrete is a commonly used criterion in producing concrete. However, the test on the compressive strength is complicated and time-consuming. More importantly, since the test is usually performed 28 days after the placement of the concrete at the construction site, it is too late to make improvements if unsatisfactory test results are incurred. Therefore, an accurate and practical strength estimation method that can be used before the placement of concrete is highly desirable. In this study, the estimation of the concrete strength is performed using support vector regression (SVR) based on the mix proportion data from two ready-mixed concrete companies. The estimation performance of the SVR is then compared with that of neural network (NN). The SVR method has been found to be very efficient in estimation accuracy as well as computation time, and very practical in terms of training rather than the explicit regression analyses and the NN techniques.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.2
• /
• pp.167-176
• /
• 2021

When producing recycled asphalt mix, it is important that the old binder of reclaimed asphalt pavement(RAP) should be well melted during blending in the mixer. The recycled asphalt mix is produced by instant mixing(IM) of all materials(RAP, virgin asphalt and new aggregates) all together in the mixer. However, in the same recycled mix, the binder around RAP aggregate was found to show higher oxidation level than the binder coated around the virgin aggregate because the old binder of RAP was not rejuvenated properly while instant mixing. The partially-rejuvenated RAP binder is assumed to be a high stiffness point in IM recycled mix. In this study, the stage mixing(SM) method was introduced; blending RAP and virgin asphalt for the first stage, and then mixing all together with hot new aggregates for the second stage. To compare the effect of the two mixing methods on moisture resistance of recycled mixes, a statistical t-test was performed between SM and IM using indirect tensile strength(ITS) and tensile strength ratio(TSR). Three conditioning methods were used; a 16-h freezing and then 24-h submerging, 48-h submerging, and 72-h submerging in 60℃ water. It was found that the TSR(=ITS_wet/ITS_dry) values of the mixes prepared by SM was clearly higher than the IM mixes, and coefficients of variation of SM mixes were lower than the IM mixes. It was also observed that the ITS_WET of SM was significantly different from the IM at α=0.05 level by statistical t-test. The ITS_WET of SM mix was reduced less than the IM mix in severer conditioned mixes. Therefore, it was concluded that the stage mixing method was an important blending technique for producing better-quality of recycled asphalt mixes, which would show higher moisture resistance than the recycled mixes produced by conventional instant mixing.

• Korean Journal of Veterinary Research
• /
• v.38 no.4
• /
• pp.793-802
• /
• 1998

Salmonellosis caused by a number of serotypes of Salmonella is an infectious, acute or chronic, zoonotic disease and characterized by enteritis and diarrhea, septicemia in animal. In these studies we investigated the prevalent serotypes of Salmonella causing animal salmonellosis in Korea and the 71 strains of Salmonella spp. were isolated from materials such as mesenteric lymph nodes, fecal samples from slaughtered animal. With the identification test results, the most prevalent serotypes were, in order, S stanley 31 strains (43.7%), S typhimurium 19 strains (26.8%) and S montevideo 11 strains (15.5%), respectively. And we could establish the method for detection of antibodies to broad variety of Salmonella serotypes. Lipopolysaccharide(LPS) antigen extracted from Salmonella was more sensitive and specific than outer membrane protein antigen from that for detection of Salmonella antibody by using an indirect ELISA. The optimal concentration of antigen was 100ng/ml of LPS, the dilutions of conjugate and serum were 1 : 1,000~2,000 and 1 : 200~400, respectively. The mix LPS-ELISA which was used by mixing LPS from S typhimurium (group B), S choleraesuis (group C) and S enteritidis (group D) were more rapid and effective than that used LPS from individual strain for detection of Salmonella serogroup O4, O7 and O9 antibody at the same time. We could obtain the high values of optical density ($0.73{\pm}0.32$) by mix LPS-ELISA on the farm which had occurred salmonellosis, but very low values of $0.17{\pm}0.06$ on the negative farm of salmonellosis. So, the mix LPS-ELISA may be used to monitor the serological surveillance for the presence of infection with a number of serotypes of Salmonella and would be useful for prevention and control of salmonellosis in animal.