• Membrane Journal
• /
• v.18 no.4
• /
• pp.354-361
• /
• 2008

Effects of operational conditions and solution chemistry on permeate flux in a hybrid ozone-ceramic ultra-filtration (UF) membrane system treating natural organic matter (NOM) were investigated. Results showed that the extent of permeate flux decline was higher at higher cross-flow velocity and ozone dosage, but it was higher at lower transmembrane pressure (TMP). The mechanism of fouling mitigation was found to be more dependent upon reaction between ozone and natural organic matter at/near catalytic membrane surface than scouring effect due to ozone gas bubbles. Addition of calcium into model NOM solution at high pH led to significant decline in permeate flux while the calcium effect on permeate flux decline was less pronounced at lower pH. After permeate flux decline during the early stage of filtration, the flux started recovering and approached fully to the initial value of it due to degradation of NOM by catalytic ozonation at ceramic membrane surface in the hybrid ozone-ceramic membrane system.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.5
• /
• pp.91-103
• /
• 2015

This paper presents "The 3-User NOR switching channel based on interference decoding with receiver cooperation" in succession to "Jeju Jong Nang channel code I, II". The Jeju Jong Nang code is considered as one of the earliest human binary coded communication (HBCC) in the world with a definite "1" or "0" binary symbolic analysis of switching circuits. In this paper, we introduce a practical example of interference decoding with receiver cooperation based on the three user Jong Nang NOR switching channel. The proposed system models are the three user Jong Nang (TUJN) NOR logic switching on-off, three-user injective deterministic NOR switching channel and Gaussian interference channel (GIC) with receiver cooperation. Therefore, this model is well matched to Shannon binary symmetric and erasure channel capacity. We show the applications of three-user Gaussian interference decoding to obtain deterministic channels which means each receiver cooperation helps to adjacent others in order to increase degree of freedom. Thus, the optimal sum rate of interference mitigation through adjacent receiver cooperation achieves 7 bits.

• Journal of Advanced Navigation Technology
• /
• v.9 no.2
• /
• pp.177-184
• /
• 2005

In this paper, we have analyzed the effects of the interference from HAPS airship stations to P-MP FWA base station and to P-MP FWA terminal station, using more detail parameters such as a new interference model, a realistic HAPS scenario, practical antenna patterns for both HAPS system and FWA system. The analysis results show that, in the case of interference from HAPS AS into the P-MP FWA BS, compatibility between two systems can be obtained by using a sectored BS antenna with the boresight directed away from the nadir. However, in the case of Interference from HAPS AS into the P-MP FWA TS, the two systems cannot operate effectively in the same bands unless the separation distance is guranteed and/or some form of interference mitigation technique is employed such as dynamic channel allocation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.1A
• /
• pp.17-24
• /
• 2012

In this paper, we described a received signal model in terms of the starting point of FFT window and derive a post-detection SINR for the receiver with MMSE filter and the corresponding filter coefficients in order to mitigate the effects of interferences caused by time and frequency selective fading channels and time difference of arrival (TDoA) in OFDMA-based Mesh Networks. In addition, we proposed an MMSE Bidirectional Successive Detection (BSD) technique which can suppress the effects of interferences among multi-nodes without any redundant FFT operations. It was shown by simulation that the proposed interference suppression technique has not an error floor at higher average SNR than 30dB in terms of 64QAM uncoded BER contrary to the conventional techniques.

• Journal of Korea Water Resources Association
• /
• v.49 no.3
• /
• pp.177-186
• /
• 2016

Drought is a water-related natural disaster which can be simply described as spatially and temporally sequential absence of water. However, its characteristics are very difficult to define. For this reason, the preparation and mitigation from drought events have not been successful. In the current study, we illustrated a design drought estimation approach of water resources infrastructures as well as the existing theoretical one to prepare and mitigate drought disasters. Theoretical and simulation methods were tested including three time series models such as autoregressive (AR), Gamma AR, Copula AR models. The results indicated that for South Korea region, the simulation-based method to estimate drought frequency presented better performance and all the three time series models show similar performance to each other. The current drought event occurring in South Korea was investigated with dividing South Korea into four basins as Han River, Nakdong River, Geum River, and Nakdong River basins. The results showed that two middle and north basins presented significant drought events with 3 year drought duration and around 40 year return period while the other two southern regions illustrated relatively weaker drought events.

• Smart Structures and Systems
• /
• v.26 no.4
• /
• pp.435-449
• /
• 2020

To effectively extract the vast wind resource, offshore wind turbines are designed with large rotor and slender tower, which makes them vulnerable to external vibration sources such as wind and wave loads. Substantial research efforts have been devoted to mitigate the unwanted vibrations of offshore wind turbines to ensure their serviceability and safety in the normal working condition. However, most previous studies investigated the vibration control of wind turbines in one direction only, i.e., either the out-of-plane or in-plane direction. In reality, wind turbines inevitably vibrate in both directions when they are subjected to the external excitations. The studies on both the in-plane and out-of-plane vibration control of wind turbines are, however, scarce. In the present study, the NREL 5 MW wind turbine is taken as an example, a detailed three-dimensional (3D) Finite Element (FE) model of the wind turbine is developed in ABAQUS. To simultaneously control the in-plane and out-of-plane vibrations induced by the combined wind and wave loads, another carefully designed (i.e., tuned) spring and dashpot are added to the perpendicular direction of each Tuned Mass Damper (TMD) system that is used to control the vibrations of the tower and blades in one particular direction. With this simple modification, a bi-directional TMD system is formed and the vibrations in both the out-of-plane and in-plane directions are simultaneously suppressed. To examine the control effectiveness, the responses of the wind turbine without control, with separate TMD system and the proposed bi-directional TMD system are calculated and compared. Numerical results show that the bi-directional TMD system can simultaneously control the out-of-plane and in-plane vibrations of the wind turbine without changing too much of the conventional design of the control system. The bi-directional control system therefore could be a cost-effective solution to mitigate the bi-directional vibrations of offshore wind turbines.

• Korean Journal of Ecology and Environment
• /
• v.46 no.1
• /
• pp.1-9
• /
• 2013

Algal blooms in potable water supplies are becoming an increasingly prevalent and serious water quality problem around the world. In addition to precipitating taste and odor problems, blooms damage the environment, and some classes like cyanobacteria (blue-green algae) release toxins that can threaten human health, even causing death. There is a recognized need in the water industry for models that can accurately forecast in real-time algal bloom events for planning and mitigation purposes. In this study, using data for an interconnected system of rivers and reservoirs operated by a New Jersey water utility, various ANN models, including both discrete prediction and classification models, were developed and tested for forecasting counts of three different algal classes for one-week and two-weeks ahead periods. Predictor model inputs included physical, meteorological, chemical, and biological variables, and two different temporal schemes for processing inputs relative to the prediction event were used. Despite relatively limited historical data, the discrete prediction ANN models generally performed well during validation, achieving relatively high correlation coefficients, and often predicting the formation and dissipation of high algae count periods. The ANN classification models also performed well, with average classification percentages averaging 94 percent accuracy. Despite relatively limited data events, this study demonstrates that with adequate data collection, both in terms of the number of historical events and availability of important predictor variables, ANNs can provide accurate real-time forecasts of algal population counts, as well as foster increased understanding of important cause and effect relationships, which can be used to both improve monitoring programs and forecasting efforts.

• Journal of the Korean GEO-environmental Society
• /
• v.11 no.3
• /
• pp.63-68
• /
• 2010

The purpose of this paper is estimating of the amount of debris flow in hazard area using terrestrial LiDAR surveying data. Jecheon area was selected for this study. Then, the surveyed LiDAR information of DEM and 1:5000 digital map of DEM have been compared with each other and the amount of debris flow has been estimated. The result of this study was shown that the amount of erosion was $24,150m^3$ and deposition was $14,296m^3$. Well shape of channelized debris flow, hillslope debris and deposition at the bending reach of a channel can be found in the area. This study on estimation of the amount of debris flow was expected to provide more informations for debris flow of disaster mitigation and simulation work.

• Journal of the Korean Society of Safety
• /
• v.33 no.4
• /
• pp.8-14
• /
• 2018

In the industrial chemical process involving combustible materials, reliable safety data are required for design prevention, protection and mitigation measures. The accurate combustion properties are necessary to safely treatment, transportation and handling of flammable substances. The combustion parameters necessary for process safety are lower flash point, upper flash point, fire point, lower explosion limit(LEL), upper explosion limit(UEL)and autoignition temperature(AIT) etc.. However, the combustion properties suggested in the Material Safety Data Sheet (MSDS) are presented differently according to the literatures. In the chemical industries, tetralin which is widely used as a raw material of intermediate products, coating substances and rubber chemicals was selected. For safe handling of tetralin, the lower and flash point, the fire point, and the AIT were measured. The LEL and UEL of tetralin were calculated using the lower and upper flash point obtained in the experiment. The flash points of tetralin by using the Setaflash and Pensky-Martens closed-cup testers measured $70^{\circ}C$ and $76^{\circ}C$, respectively. The flash points of tetralin using the Tag and Cleveland open cup testers are measured $78^{\circ}C$ and $81^{\circ}C$, respectively. The AIT of the measured tetralin by the ASTM E659 apparatus was measured at $380^{\circ}C$. The LEL and UEL of tetralin measured by Setaflash closed-cup tester at $70^{\circ}C$ and $109^{\circ}C$ were calculated to be 1.02 vol% and 5.03 vol%, respectively. In this study, it was possible to predict the LEL and the UEL by using the lower and upper flash point of tetralin measured by Setasflash closed-cup tester. A new prediction method for the ignition delay time by the ignition temperature has been developed. It is possible to predict the ignition delay time at different ignition temperatures by the proposed model.

• Advances in environmental research
• /
• v.1 no.1
• /
• pp.15-35
• /
• 2012

Mercury (Hg) is a global environmental pollutant that has been the cause of many public concerns. One particular concern about Hg in aquatic systems is its trophic transfer and biomagnification in food chains. For example, the Hg concentration increases with the increase of food chain level. Fish at the top of food chain can accumulate high concentrations of Hg (especially the toxic form, methylmercury, MeHg), which is then transferred to humans through seafood consumption. Various biological and physiochemical conditions can significantly affect the bioaccumulation of Hg-including both its inorganic (Hg(II)) and organic (MeHg) forms-in fish. There have been numerous measurements of Hg concentrations in marine and freshwater fish worldwide. Many of these studies have attempted to identify the processes leading to variations of Hg concentrations in fish species from different habitats. The development of a biokinetic model over the past decade has helped improve our understanding of the mechanisms underlying the bioaccumulation processes of Hg in aquatic animals. In this review, I will discuss how the biokinetic modeling approach can be used to reveal the interesting biodynamics of Hg in fish, such as the trophic transfer and exposure route of Hg(II) and MeHg, as well as growth enrichment (the increases in Hg concentration with fish size) and biomass dilution (the decreases in Hg concentration with increasing phytoplankton biomass). I will also discuss the relevance of studying the subcellular fates of Hg to predict the Hg bioaccessibility and detoxification in fish. Future challenges will be to understand the inter- and intra-species differences in Hg accumulation and the management/mitigation of Hg pollution in both marine and freshwater fish based on our knowledge of Hg biodynamics.