• Journal of Korean Society of Forest Science
• /
• v.40 no.1
• /
• pp.43-50
• /
• 1978

The elder berry was known to the rich in natural food colour resources and used in as for making wine, confectionary, perfumes, natural food colour, making elder berry juice, jelly, jam and medicinal properties or oils. In the present study, wish was to find the effect of various factors on the success of the vegetative propagation of elder berry by means cutting in the exposed field and green house was carried out and those obtained results can be summarized as follows. 1. Cuttings with dormant cutting stocs in the polyethylen house with heating and water mist spray resulting 100 percent survival. And temperature and the relative humidity in which fraim during the cutting season were around $20{\sim}25^{\circ}C$ and 70-90% respectively and in case as more significant other of the 1% Level. 2. With five varieties tested, resulting 93.8 percent survival, The F. value is not significant. 3. With four organs of cutting stock tested resulting 57.5 percent survival on the cuttings with two knodes of dormant cutting stock served as better cutting stock than others. The F. value is more significantly 1% Level. 4. Dormand bud served as possible cutting stock was found to be 17.66 survival percentage. 5. Both earlier and later stage of germinated Leaves with soft wood cutting stock poor cuttings, and the degree of development of 15th June cutting stock was optimum stage on the principal factor governing the success of cutting in the soft wood cutting showing 54% survival. The F. value is more 1% Level significant.

• Tribology and Lubricants
• /
• v.24 no.6
• /
• pp.320-325
• /
• 2008

The recent industrial application requires technical methods to get the cutting fluid droplet surfaces in particular from the viewpoint of topography and micro texture. To characterize the surface topography of droplet, the combination of the confocal laser scanning microscope (CLSM) and wavelet filtering is well suited for obtaining the droplet geometry encountered in tribological research. This technique indicates a better agreement in obtaining an appropriate droplet surface obtained by the CLSM over a detail range of surface accuracy (resolution: $2{\mu}m$). And the results allow an excellent accuracy in a measurement of a droplet surface. The combination of extended focal depth measurement configured and multi-scale wavelet filtering has proven that it can construct a droplet surface in a successive and accurate way. A multi-scale approach of wavelet filtering was developed based on the decomposition and reconstruction of droplet surface by 2D wavelet transform using db9 (a mother wavelet of daubechies). Also this technique can be extended to characterize the quantification of droplet properties and other field in a wide range of scales. Finally this method is verified to be a better droplet surface modeling in a micro scale arising in a mist machining.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.04a
• /
• pp.206-208
• /
• 2002

Metalworking fluids (MWFs) are fluids used during machining and grinding to prolong the life of the tool , carry away debris, and protect the surfaces of work pieces. These fluids reduce friction between the cutting tool and the work surface, reduce wear and galling, Protect surface characteristics, reduce surface adhesion or welding and carry away generated heat. Workers can be exposed to MWFs by inhaling aerosols (mists) and by skin contact with the fluid. Skin contact occurs by dipping the hands into the fluid, splashes, or handling workpieces coated with the fluids. The amount of mist generated (and the result ins level of exposure) depends on many factors. To reduce the potential health risks associated with occupational exposures to MWFs, it is required to establish optimum MWFs supply method and condition with minimum Quantity in all over the mechanical machining field including high speed type heavy cult ing process.

• The Journal of Natural Sciences
• /
• v.18 no.1
• /
• pp.91-97
• /
• 2007

The Korean name "Bizooki" tree was named by the shape of winter bud which is like a slim bow. There are four scientific names in the tree which are Cleyera japonica Thunberg, Cleyera ochnacea DC, Sakakia ochnacea Nakai, and Ternstroemia gymnanthera. And the English name are Japanese Ternstroemia and Japanese Cleyera. "Bizooki" tree has planted at Buddhist temples in Japan for the ritual. The best result of stem cutting in "Bizooki" tree, 100 percent of rooting, could be accomplished in July when cuttings were done on the mixture-soil containing the same rates by volume of vermiculite, peatmoss and perlite with cuts processed with IBA 1,000 mg/l under the circumstances that 70% of shade, plastic mulching, and mist were conditioned.

• Journal of Bio-Environment Control
• /
• v.23 no.1
• /
• pp.31-38
• /
• 2014

Rooting agents and shading treatments were tested in two different experiments to determine their effects on the establishment success of hardwood cuttings of three highbush blueberry varieties 'Bluecrop', 'Duke' and 'Sunrise'. For the experiment with rooting agents, one-cm long bases of the cuttings were dipped into solutions of IBA or NAA for 5 s, both at 0, 500 and $1000mg{\cdot}L^{-1}$ in 50% ethanol, and were also treated with Rootone$^{(R)}$ powder. Determined 90 days after cutting, the percent rooting and root weight were increased by NAA at $500mg{\cdot}L^{-1}$ in 'Bluecrop' and 'Sunrise', while in 'Duke' IBA at $500mg{\cdot}L^{-1}$ was effective. These auxin treatments were found to work better than a commercial product Rootone$^{(R)}$. The rooting agent-induced increases in root development resulted in better shoot growth of the cuttings in all three varieties, as determined after 90 days of further growth in individual containers. In the experiment with shading treatments, different levels of the shading treatment (30 to 90%) were imposed over the cutting bed under no mist. In all three varieties, 30% shading increased the percent rooting and root and shoot growth, compared to no shading control. However, shading levels higher than 50% shading were found to be inhibitory for hardwood cuttings of highbush blueberries, especially under the environmental conditions with no mist system.

• Journal of Preventive Medicine and Public Health
• /
• v.29 no.4 s.55
• /
• pp.785-799
• /
• 1996

We investigated the 1,004 workers who worked in a automobile factory to study the epidemiologic characterists of dermatoses due to cutting oils. Among the workers, 667(66.4%) answered the questionaire. They are belong to 5 departments of the factory-the Engine-Work(258 workers), Gasoline engine Assembly(210), Diesel engine Assembly(96), Power train Work(86), Power train Assembly(17). We measured the oil mist concentration in air of the departments and examined the workers who had dermatologic symptoms. The results were follows; 1) Oil mist concentration ; Of all measured points(52),9 points(17.2%) exeeded $5mg/m^3$- the time-weighed PEL-and one department had a upper confidence limit(95%) higher than $5mg/m^3$. 2) Dermatologists examined 213 workers. 172 of them complained any skin symptoms at that time - itching(32.5%), papule(21.6%), scale(15.7%), vesicle(12.5%) in order. The abnormal skin site found by dermatologist were palm(29.3%), finger & nail(24.6%), forearm(16.2%), back of hand(8.4%) in order. 3) As the result of physical examination, we found that 160 workers had skin diseases. Contact dermatitis was the most common; 69 workers had contact dermatitis alone(43.1%), 11 had contact dermatitis with acne(6.9%), 10 had contact dermatitis with folliculitis(6.3%), 1 had contact dermatitis with acne & folliculitis, and 1 had contact dermatitis with abnormal pigmentation. Others were folliculitis(9 workers, 5.6%), acne(8, 5.0%), folliculitis & acne (2, 1.2%), keratosis(1, 0.6%), abnormal pigmentation (1, 0.6%), and non-specific hand eczema (47, 29.3%). 4) The prevalence of any skin diseases was 34.0 pet 100 in cutting oil users, and 13.3 per 100 in non- users. Especially, the prevalence of contact dermatitis was 23.0 per 100 in cutting oil users and 23.0 per 100 in non-users. 5) We tried patch test(standard serise, oil serise, organic solvents) on 49 patients to differentiate allergic contact dermatitis from irritant contact dermatitis and found 20 were positive. 6) In a multivariate analysis(independant=age, tenure, kinds of cutting oil), the risk of skin diseases was higher in the water-based cutting oil user and both oil user than non-user or neat oil user(odds ratio were 2.16 and 2.78, respectively). And the risk of contact dermatitis was much higher at the same groups(odds ratio were 5.16 and 6.82, respectively).

• Journal of the Korean Society of Costume
• /
• v.51 no.4
• /
• pp.71-80
• /
• 2001

Since the beginning of the 90's, Fashion shows appear to be a type of performance form of art combining with other areas to visually entertain the viewers. This can be explained by the modern tendency to escape from society which requires formality and complicated lifestyles. Fashion shows take place in a scene Influenced by the idea of post-modernism which redefines the definition of space. A church, old factory, unoccupied ground, subway stations, or even place like a waste disposal are used as a setting. The stage set is no longer the T shape run way and the procinium arch has disappeared. The gap between audience and stage has diminished and theatrical element is added to the fashion performance by using viewers living and working environments as setting of the show. The human relation with machine based on the cutting edge technology such as the stage automation, robots and mist making sprinkler system introduces new elements with spontaneity and detailed planning in the stage performance. Music also plays an Important role in attracting viewers. The sound track covers house music to techno music. Instead of music being abstract, folks orchestral music, choirs, piano. even live concert performed by pop artist provide the liveliness of the fashion show. And the catwalk itself is a performance. Model needs to be well trained as the capable talent who can handle sensitive gestures, facial expressions, dancing and choreography. The improvisatorial interaction between audience and model lead to audience participation. Models now range from pop star, ordinary people, handicapped people, to elderly and so on. John Galliano introduced the theatrical factors for the fashion show and Alexander Mcqueen approached the fashion show as the visual art of communication. Hussein Chalayan utilized high technology skewing futurism as if in a magic show. Today the Fashion show tends to be a total performance which includes audience participation, impromptu, and that break the limitation that fashion shows previously had. This will lead the fashion industry in opening new horizon of its own.