• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1996.06a
• /
• pp.258-292
• /
• 1996

In the last year great interest appears to YBCO thin films preparation on different substrate materials. Preparation of epitaxial film is a very difficult problem. There are many requirements to substrate materials that must be fullfilled. Main problems are lattice mismatch (misfit) and similarity of structure. From paper [1] or follows that difference in interatomic distances and angles of substrate and film is mire important problem than similarity of structure. In this work we present interatomic distances and angle relations between substrate materials belonging to ABCO4 group (where A-Sr or Ca, B-rare earth element, C-Al or Ga) of different orientations and YBCO thin films. There are many materials used as substrates for HTsC thin films. ABCO4 group of compounds is characterized by small dielectric constants (it is necessary for microwave applications of HTsC films), absence of twins and small misfit [2]. There most interesting compounds CaNdAlO4, SrLaAlO4 and SrLaGaO4 were investigated. All these compounds are of pseudo-perovskite structure with space group 14/mmm. This structure is very similar to structure of YBCO. SLG substrate has the lowest misfit (0.3%) and dielectric constant. For preparation of then films of substrates of this group of compound plane of <100> orientation are mainly used. Good quality films of <001> orientations are obtained [3]. In this case not only a-a misfit play role, but c-3b misfit is very important too. Sometimes, for preparation of thin films substrates of <001> and <110> orientations were manufactured [3]. Different misfits for different YBCO faces have been analyzed. It has been found that the mismatching factor for (100) face is very similar to that for (001) face so there is possibility of preparation of thin films on both orientations. SrLaAlO4(SLA) and SrLaGaO4(SLG) crystals of general formula ABCO4 have been grown by the Czochralski method. The quality of SLA and SLG crystals strongly depends on axial gradient of temperature and growth and rotation rates. High quality crystals were obtained at axial gradient of temperature near crystal-melt interface lower than 50℃/cm, growth rate 1-3 mm/h and the rotation rate changing from 10-20pm[4]. Strong anisotropy in morphology of SLA and SLG single crystals grown by the Czochralski method is clearly visible. On the basics of our considerations for ABCO4 type of the tetragonal crystals there can appear {001}, {101}, and {110} faces for ionic type model [5]. Morphology of these crystals depend on ionic-covalent character of bonding and crystal growth parameters. Point defects are observed in crystals and they are reflected in color changes (colorless, yellow, green). Point defects are detected in directions perpendicular to oxide planes and are connected with instability of oxygen position in lattice. To investigate facets formations crystals were doped with Cr3+, Er3+, Pr3+, Ba2+. Chromium greater size ion which is substituted for Al3+ clearly induces faceting. There appear easy {110} faces and SLA crystals crack even then the amount of Cr is below 0.3at.% SLG single crystals are not so sensitive to the content of chromium ions. It was also found that if {110} face appears at the beginning of growth process the crystal changes its color on the plane {110} but it happens only on the shoulder part. The projection of {110} face has a great amount of oxygen positions which can be easy defected. Pure and doped SLA and SLG crystals measured by EPR in the<110> direction show more intensive lines than in other directions which allows to suggest that the amount of oxygen defects on the {110} plane is higher. In order to find the origin of colors and their relation with the crystal stability, a set of SLA and SLG crystals were investigated using optical spectroscopy. The colored samples exhibit an absorption band stretching from the UV absorption edge of the crystal, from about 240 nm to about 550 m. In the case of colorless sample, the absorption spectrum consists of a relatively weak band in the UV region. The spectral position and intensities of absorption bands of SLA are typical for imperfection similar to color centers which may be created in most of oxide crystals by UV and X-radiation. It is pointed out that crystal growth process of polycomponent oxide crystals by Czochralski method depends on the preparation of melt and its stoichiometry, orientation of seed, gradient of temperature at crystal-melt interface, parameters of growth (rotation and pulling rate) and control of red-ox atmosphere during seeding and growth (rotation and pulling rate) and control of red-ox atmosphere during seeding and growth. Growth parameters have an influence on the morphology of crystal-melt interface, type and concentration of defects.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.12C
• /
• pp.1173-1183
• /
• 2006

In this paper, we propose an efficient method for improving visual quality of AR-FGS (Adaptive Reference FGS) which is adopted as a key scheme for SVC (Scalable Video Coding) or H.264 scalable extension. The standard FGS (Fine Granularity Scalability) adopts AR-FGS that introduces temporal prediction into FGS layer by using a high quality reference signal which is constructed by the weighted average between the base layer reconstructed imageand enhancement reference to improve the coding efficiency in the FGS layer. However, when the enhancement stream is truncated at certain bitstream position in transmission, the rest of the data of the FGS layer will not be available at the FGS decoder. Thus the most noticeable problem of using the enhancement layer in prediction is the degraded visual quality caused by drifting because of the mismatch between the reference frame used by the FGS encoder and that by the decoder. To solve this problem, we exploit the principle of cyclical block coding that is used to encode quantized transform coefficients in a cyclical manner in the FGS layer. Encoding block coefficients in a cyclical manner places 'higher-value' bits earlier in the bitstream. The quantized transform coefficients included in the ealry coding cycle of cyclical block coding have higher probability to be correctly received and decoded than the others included in the later cycle of the cyclical block coding. Therefore, we can minimize visual quality degradation caused by bitstream truncation by adjusting weighting factor to control the contribution of the bitstream produced in each coding cycle of cyclical block coding when constructing the enhancement layer reference frame. It is shown by simulations that the improved AR-FGS scheme outperforms the standard AR-FGS by about 1 dB in maximum in the reconstructed visual quality.

• KDI Journal of Economic Policy
• /
• v.32 no.4
• /
• pp.153-195
• /
• 2010

The recent global financial crisis has been the outcome of, among other things, the mismatch between institutions and the reality of the market in the current global financial system. The International financial institutions (IFIs) that were designed more than 60 years ago can no longer effectively meet the challenges posed by the current global economy. While the global financial market has become integrated like a single market, there is no international lender of last resort or global regulatory body. There also has been a rapid shift in the weight of economic power. The share of the Group of 7 (G7) countries in global gross domestic product (GDP) fell and the share of emerging market economies increased rapidly. Therefore, the tasks facing us today are: (i) to reform the IFIs -mandate, resources, management, and governance structure; (ii) to reform the system such as the international monetary system (IMS), and regulatory framework of the global financial system; and (iii) to reform global economic governance. The main focus of this paper will be the IMS reform and the role of the Group of Twenty (G20) summit meetings. The current IMS problems can be summarized as follows. First, the demand for foreign reserve accumulation has been increasing despite the movement from fixed exchange rate regimes to floating rate regimes some 40 years ago. Second, this increasing demand for foreign reserves has been concentrated in US dollar assets, especially public securities. Third, as the IMS relies too heavily on the supply of currency issued by a center country (the US), it gives an exorbitant privilege to this country, which can issue Treasury bills at the lowest possible interest rate in the international capital market. Fourth, as a related problem, the global financial system depends too heavily on the center country's ability to maintain the stability of the value of its currency and strength of its own financial system. Fifth, international capital flows have been distorted in the current IMS, from EMEs and developing countries where the productivity of capital investment is higher, to advanced economies, especially the US, where the return to capital investment is lower. Given these problems, there have been various proposals to reform the current IMS. They can be grouped into two: demand-side and supply-side reform. The key in the former is how to reduce the widespread strong demand for foreign reserve holdings among EMEs. There have been several proposals to reduce the self-insurance motivation. They include third-party insurance and the expansion of the opportunity to borrow from a global and regional reserve pool, or access to global lender of last resort (or something similar). However, the first option would be too costly. That leads us to the second option - building a stronger globalfinancial safety net. Discussions on supply-side reform of the IMS focus on how to diversify the supply of international reserve currency. The proposals include moving to a multiple currency system; increased allocation and wider use of special drawing rights (SDR); and creating a new global reserve currency. A key question is whether diversification should be encouraged among suitable existing currencies, or if it should be sought more with global reserve assets, acting as a complement or even substitute to existing ones. Each proposal has its pros and cons; they also face trade-offs between desirability and political feasibility. The transition would require close collaboration among the major players. This should include efforts at the least to strengthen policy coordination and collaboration among the major economies, and to reform the IMF to make it a more effective institution for bilateral and multilateral surveillance and as an international lender of last resort. The success on both fronts depends heavily on global economic governance reform and the role of the G20. The challenge is how to make the G20 effective. Without institutional innovations within the G20, there is a high risk that its summits will follow the path of previous summit meetings, such as G7/G8.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.39 no.4
• /
• pp.187-194
• /
• 2023

Purpose: A mismatched size in the post and post space is a common problem during post-fixation. Since this discordance affects the bonding strength of the fiber-reinforced composite resin post (FRC Post), a corresponding luting agent is required. The aim of this study was to evaluate the bonding strength of the FRC post according to the fitness of the fiber post and the type of luting agent. Materials and Methods: Thirty mandibular premolar were endodontic-treated and assigned to two groups according to their prepared post space: Fitting (F) and Mismatching (M). These groups were further classified into three subgroups according to their luting agent: RelyX Unicem (ReX), Luxacore dual (Lux), and Duolink (Duo). A push-out test was performed to measure the push-out bond strengths. The fractured surfaces of each cross-section were then examined, and the fracture modes were classified. Results: In the ReX and Duo subgroups, the F group had a higher mean bond strength; however, the Lux subgroup had no significant difference between the F and M groups. In the analysis of the failure modes, the ReX subgroup had only adhesive failures between the cement and dentin. Conclusion: The result of this study showed that the bond strength of an FRC post was influenced by the type of luting agent and the mismatch between the diameter of the prepared post space and that of the post.