• Journal of the Korean Magnetics Society
• /
• v.19 no.4
• /
• pp.152-155
• /
• 2009

Ba-Ferrite single crystals were prepared and the magnetic and thermal properties were characterized by Mossbauer spectroscopy. The single crystal layer was cut in the c-axis and radiated to the surface by ${\gamma}$-rays for Mossbauer spectroscopy. We found out that the spin states in Fe ions were parallel to the ${\gamma}$-rays direction and the whole crystal bulk formed only one crystal with the same spin direction. $M\"{o}ssbauer$ spectra in single crystal have only 4 sets of 4 absorption lines in each Fe site when the ${\gamma}$-rays have the same radiation direction with the c-axis in the crystal, and there was no 2b-site spectrum. The zero absorption of 2b-site means that there was a fast diffusion motion in a double-well atomic potential at room temperature, in which bipyramidal Fe ions have the two minima at each side mirror plane.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.191-194
• /
• 2002

In optical pick-up, optical components such as objective lens, collimator, mirror, laser diode and photo diode are mounted on the pick-up base. These components must keep their original position during operation for proper transmittance of information from laser diode to optical disk and back to photo diode. However, micro thermal deformation of pick-up base which is induced by thermal environment during operation can deteriorate the performance of optical pick-up. Therefore, it is important to measure and analyze the thermal deformation behavior of pick-up base under thermal environment. In the present study, a measurement system using holographic interferometry was designed to measure micro thermal deformation of pick up base. The measurement system was verified by using the deformation of cantilever with prescribed motion actuated by PZT with 1 nm resolution. Interferometric measurement was compared quantitatively with that induced by PZT actuator. Finally, micro thermal deformation of pick-up base under actual thermal environment was measured using the present holographic interferometry and the results were analysed.

• Journal of the Optical Society of Korea
• /
• v.15 no.4
• /
• pp.394-397
• /
• 2011

For the purpose of fabricating off-axis aspheric optics, we propose an 8-axis-polishing machine combined with a testing tower whose height is up to 9 m. The proposed polishing machine was designed and analyzed by using a well-known finite element method. The eight axes of the machine have a synchronized motion generated by a computer, and each axis was calibrated by a heterodyne laser interferometer or an optical encoder. After calibration, the maximum positioning error of the machine was less than 2 ${\mu}m$ within a whole 2 m ${\times}$ 2 m area. A typical fabrication result of a ${\phi}1.5$ m concave mirror was also described in this manuscript.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.3 s.174
• /
• pp.728-734
• /
• 2000

An asymmetric actuator can be used to reduce the distance between the reflective mirror and objective lens of a small optical disk drive for use in the notebook-sized personal computer data storage devices. However, this asymmetric actuator is very sensitive to the subsidiary resonance which is caused by its rigid body motion. In this paper, an analytical approach using a simple lumped parameter system model is presented with a physical insight to investigate why the subsidiary resonance occurs. The finite element method is used to figure out the force and torque characteristics of the asymmetric actuator which are essential to understand the subsidiary vibration characteristics. The frequency responses are presented to examine how the subsidiary resonance is altered for various situations of having different thickness of a yoke and permanent magnet and of having a different magnet circuit. Finally, the design guidelines to avoid the subsidiary resonance will be presented.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.7
• /
• pp.94-100
• /
• 2010

This paper describes the design and evaluation procedure of an ultra-precision rotary table for freeform generating machined tools. Design of the thrust and journal hydrostatic bearings and experimental evaluation of the table were performed. To get the compact size and less lost motion direct drive servomotor with ultra precision encoder. From the considered design, following performance were confirmed by experiment. The total stiffness of the prototype rotary table was 483.6 $N/{\mu}m$ and 97.6 $N/{\mu}m$ for axial and radial direction, respectively. Rotational accuracy of the table was investigated by capacitive sensor and reversal measurement technique, and 0.10 ${\mu}m$ radial direction and 0.05 ${\mu}m$ axial direction of the rotational accuracy were confirmed. The micro resolution of the table was also investigated with displacement of capacitive sensor, and $0.5/10000^{\circ}$ of micro resolution was confirmed. Index accuracy of the table was evaluated by the autocollimator and polygon mirror, and the $\pm0.39$ arcsec accuracy and $\pm0.16$ arcsec repeatability of the table were confirmed. Those are under the general requirements of ultra precision rotary tables for freeform generating machined tools.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.12
• /
• pp.3115-3123
• /
• 1993

This paper presents a real-time correction method of the movemont errors of a translatory precision machine axis. This method is a null-balances technique in which two plane mirrors are used to generate an interferometric fringe pattern utilizing the optical principles of TwymanGreen interferometry. One mirror is fixed on a reference frame, while the other is placed on the machine axis being supported by three piezoelectric actuators. From the fringe pattern, one translatory and two rotational error components of the machine axis are simultaneously detected by using CCD camera vision and image processing techniques. These errors are then independently suppressed by activating the peizoelectric actuators by real-time feedback control while the machine axis is moving. Experimental results demonstrate that a machine axis can be controlled with movement errors less than 10 nm in vertical straightness, 0.1 arcsec in pitch, and 0.06 arcsec in roll for 50mm travel by adopting the real-time correction method.

• Journal of the Korean Solar Energy Society
• /
• v.29 no.1
• /
• pp.50-57
• /
• 2009

Heliostat in the tower type solar thermal power plant is a mirror system tracking the sun's movement to collect the solar energy and it is the most important subsystem determining the efficiency of solar thermal power plant. Thus a good performance of it, which is mostly the accurate sun tracking performance under the various hazardous operating condition, is required. Heliostat control system is a system to manage the heliostat sun tracking movement and other operations. It also communicates with the master controller through the heliostat filed control system to receive and send the informations required to operate the heliostat as a part of the solar thermal power plant. This study presents a heliostat control system designed and developed for the 1MW solar thermal power plant. We first define the functionality of heliostat control system. Then sun tracking controller as well as the sun tracking algorithm satisfying the required functionality have been developed. We tested the developed heliostat control system and it showed a good performance in regulation of heliostat motion and communication.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.3
• /
• pp.25-31
• /
• 2003

In this paper, proposed is a control system for a galvanometer which is widely used fer laser display, laser processing and marking systems. The galvanometer with mirror is modeled as a second-order dynamic system Based on frequency responses and time domain responses of the developed model, a conventional PID controller is designed And it is implemented using a DSP(TMS320C32) chip with precision A/D and D/A converters. Through frequency response and experimental results, it is convinced that the proposed control system works well in real environment. Furthermore it is very easy to be connected to any PC because of USB communication port, and the cost of the marking system can be lowered very much because the DSP do the all the jobs for generating font motion as well as controlling the galvanometer.

• Journal of Korean Theatre Studies Association
• /
• no.49
• /
• pp.133-169
• /
• 2013

Reexamining Brecht's theoretical hypotheses in terms of cognitive science, this essay arrived at several temporary interpretations. Cognitive science implies that empathy can precede the rational understanding in Verfremdungseffekt. The spectator tends to simulate the unfamiliar incident and character and feels the consequential embodied emotion that leads to the cognitive understanding. The similar situation can be found in social gestus. According to cognitive science, gesture(social gestus) is simulated in the mirror-neuron of spectator, arousing consequently the embodied emotion that triggers the succeeding understanding. The spectator apts to experience and feel physically the moving gesture before decoding it as a social signification. Brecht's intention that attempts to reveal the duality of actor and character by eliminating the fourth wall is negated by cognitive science. According to the theory of conceptual blending, the spectator under the eliminated fourth wall mixes actor and character, and simulates this blending image so that he experiences it imaginatively. As such, another kind of illusion can be formed when a fourth wall is collapsed. Meanwhile, the critical thinking of spectator Brecht wanted can be hard to occur during the performance. It is necessary for the spectator to recollect the bygone dialogue and action in terms of social context as if he presses the pause, stopping the playback while watching a play in video. In this respect the social meaning Brecht intended can be achieved more effectively by the stop motion like tableau. It would not only give the time for the spectator to consider the implied social signification, but also make him possible to decode a semiotic meaning as if interpreting a still picture. Or it can be delivered by the dialogue that expresses the playwright's critical judgement. In this case, the subject of critical thinking is not the spectator but the author. The alternative explanation that the cognitive science suggests illuminates theoretically the reasons why Brecht's theory fails to be realized in practice. In a sense, Brecht's theory is nothing but a theoretical hypothesis. It takes the premise that the emotion hinders the rational thinking, understanding emotion and reason oppositively like Plato. This assumption is negated easily by the recent cognitive science that sees the reason as a by-product of physical experience including emotion. The rational understanding, in this sense, begins from the embodied emotion. As such the cognitive science denies the dichotomy of emotion and reason that Brecht adopted. The theoretical hypothesis of cognitive science makes us recognize again the importance of bodily experience in theatre. In theatre the spectator tends to experience physically before decoding the intellectual meaning. The spectator Brecht wanted, therefore, is far from the reality. The spectator usually experiences and reacts physically before decoding the meaning critically. Thus Brecht's intention can be realized by the embodied emotion resulted from simulation. This tentative interpretation suggests that we need to pay more attention to the empirical study of spectatorship, not remaining in a speculative study.

• Korean Institute of Interior Design Journal
• /
• v.23 no.5
• /
• pp.33-40
• /
• 2014

The Danish-Icelandic artist, Olafur Eliasson who was born in 1967 is known for installation projects employing materials such as colour, fog, mirror and light to rethink the relationship between human and surrounding. Since he started the early projects, Eliasson has been interested in the relationship between an art, a viewer and space. He has used the medium from nature because he thought nature is very common subject to derive new idea of relationship between human and surrounding. Eliasson revealed the idea of relationship between human and surrounding by three characteristics of spatial design such as 'reinterpretation of placeness by juxtaposition of mediums and defamilarization', 'ambiguity and extensity of depth distance of space by mediums' and 'change in spatiality by movement of viewers and time'. This paper focused on four case projects : The mediated motion in 2001, The weather project in 2003, The blind pavilion in 2003, Your rainbow panorama in 2011. It is aimed to discover relationship between human and surrounding in the case projects under three characteristics. This study found that three characteristics were differently applied in the case projects in terms of spatial experience and design methods. Inside & outside locations, formal quality, visual-perceptual relationships in and around each case are crucial elements and tools. The unique relationship between human and surrounding of Eliasson and three characteristics are applicable to architecture and spatial design.