• 대한기계학회논문집A
• /
• 제26권6호
• /
• pp.1194-1202
• /
• 2002

A study on the topology optimization of a multi-spectral camera for space-use is presented. The optimization is carried out under self-weight and polishing pressure loading. A multi-spectral camera for space-use experiences degradation of optical image in the space, which can not be detected on the optical test bench on the earth. An optical surface deformation of a primary mirror, which is a principal component of the camera system, is an important factor affecting the optical performance of the whole camera system. In this study, topology optimization of the primary mirror of the camera is presented. As an objective function, a measure of Strehl ratio is used. Total mass of the primary mirror is given as a constraint to the optimization problem. The sensitivities of the objective function and constraint are calculated by direct differentiation method. Optimization procedure is carried out by an optimality criteria method. For the light-weight primary mirror design, a three dimensional model is treated. As a preliminary example, topology optimization considering a self-weight loading is treated. In the second example, the polishing pressure is also included as a loading in the topology optimization of the mirror. Results of the optimized design topology for the mirror with various mass constraints are presented.

• 한국항공우주학회지
• /
• 제39권7호
• /
• pp.682-687
• /
• 2011

일반적으로 탑재 교정을 위한 교정 반사경 구동장치는 교정임무 수행 시에는 주광경로 상의 전개위치로 반사경을 구동하며, 교정 후에는 주광경로와 이격된 수납위치로 반사경을 구동한다. 교정 반사경 구동장치의 결함 발생 시에는 반사경이 전개된 상태로 남아 주광경로를 차단하지 않도록 반사경을 강제 수납한다. 본 논문에서 제안한 결함 안전장치를 가지는 교정용 반사경 구동장치는 구동을 위한 스텝모터, 전개 및 수납 상태확인을 위한 마이크로 스위치, 베어링과 스프링의 기능을 동시에 갖는 피봇베어링 등으로 구성된다. 본 논문에서는 상기의 기능을 갖는 교정 반사경 구동장치 구현을 위한 구동장치 구성을 제안하였으며, 구성요소의 최적화 설계치를 도출하고 기능시험을 통해 결함안전 기능을 갖는 교정 반사경 구동장치의 유효성을 검증하였다.

• Journal of the Optical Society of Korea
• /
• 제19권6호
• /
• pp.604-613
• /
• 2015

An unobstructed off-axis two-mirror system is presented in this paper. First a suitable initial configuration is established based on third-order aberration theory. In order to achieve a wide field of view (FOV) with high image quality , the diffractive mirror is adopted in the two-mirror system to increase the optimization freedom and the aberration relationship between diffractive phase coefficients and Zernike coefficients is derived. Furthermore, a complete comparison design example with a focal length of 1200 mm, F-number of 12, and FOV of 40° × 2° is given to verify the aberration correction ability of the diffractive mirror. The system average wavefront error is 0.007 λ (λ=0.6328 μm) developed from 0.061 λ when the system didn’t adopt the diffractive mirror. In this system the phase modulation function of the diffractive mirror is established as an even function of x, so we could obtain a symmetrical imaging quality about the tangential plane, and the symmetric aberration performance also brings considerable convenience to alignment and testing for the system.

• Current Optics and Photonics
• /
• 제7권4호
• /
• pp.435-442
• /
• 2023

These days, the size of a reflective telescope has been increasing for astronomical observation. An additional optical system usually assists a large ground telescope for image analysis or the compensation of air turbulence. To guide collimated light to the external optical system through a designated path, a coudé mirror is usually adopted. Including a collimator, a coudé mirror of a ground telescope is affected by gravity, depending on the telescope's pointing direction. The mirror surface is deformed by the weight of the mirror itself and its mount, which deteriorates the optical performance. In this research, we propose an optimization method for the coudé mirror assembly for a 1-m class ground telescope that minimizes the gravitational surface error (SFE). Here the mirror support positions and the sizes of the mount structure are optimized using finite element analysis and the response surface optimization method in both the horizontal and vertical directions, considering the telescope's altitude angle. Throughout the whole design process, the coefficients of the Zernike polynomials are calculated and their amplitude changes are monitored to determine the optimal design parameters. At the same time, the design budgets for the thermal SFE and the mass and size of the mount are reflected in the study.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.1332-1335
• /
• 1996

It is very important to predict the future position for the heavy vehicle with evasive maneuvering. In this paper, we considered for the manual image tracking system. The vehicle images are received from gyro stabilized mirror system, pass through the optical lens, processed, and displayed on the TV monitor. The operator try to lay the reticle to the center of vehicle image. When the vehicle is moving, the mirror platform (actually the line of sight) should follow the vehicle and the angular rate information is picked up from the mirror stabilized system. This rate signal should be used to predict the future vehicle position. The problem is that the visual system of the human operator is in the closed loop system. The rate signals are disturbed by the operator. In addition, there are some non linearities concerned with the control handle bar and the servo control system. The proposed Kalman filter, combined with some modifications for operator disturbance rejection, improved the predication of the future vehicle position when compared with the conventional passive filter used.

• 한국광학회지
• /
• 제5권2호
• /
• pp.212-216
• /
• 1994

원적외선 영역인 $8-12.\mu$m 대역의 열상장비 주사광학계를 설계 제작하였다. 검출기로 5개 소자의 SP-RITE HgCdTe를 사용하는 직병렬 주사를 위해 수평 및 수직주사에는 각각 회전다면거울과 진동평면거울을 사용하였으며, 주사연결거울로는 구면거울을 사용하여 주사거울의 크기 및 입사동에서의 동수차를 최소화 하였다. 주사광학계는 $40^{\circ}\times26.67^{\circ}$의 넓은 주사시야를 갖는다. 회절 변조전달함수의 계산결과 회절한계의 성능을 만족하였으며 제작 및 시험 결과 고분해능의 열영상을 얻을 수 있었다.

• 한국위성정보통신학회논문지
• /
• 제3권2호
• /
• pp.26-31
• /
• 2008

As a multi-mission GEO satellite, Communication, Ocean, and Meteorological Satellite (COMS) is scheduled to be launched in the year 2009. COMS has three different payloads: Ka-band communication payload, Geostationary Ocean Color Imager (GOCI) and Meteorological Imager (MI). Among the three payloads, MI and GOCI have several conflict relationships; one of them is that if MI mirror moves vertically larger than 4 Line Of Sight (LOS) angle while GOCI is imaging, image quality of GOCI becomes degraded. In this paper, MI scheduling algorithm to prevent GOCI's image quality degradation will be presented.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.319-320
• /
• 2006

In this paper, we propose a vision based system employing two cameras to provide effective touch screen function. The two main processes - determining touch (or no-touch) and contact location of screen plane - are essential for enabling touch screen function. First region of interest is found by using color characteristic and histogram for determining the contact mode. Second, if the hand touches the mirror, the fingertip point in image is found using the correlation coefficient based on the mirror attribute. Subsequently, the fingertip coordinate in image is transformed to the location in mirror plane by using four predefined points (termed as four-point method) and bilinear transform. Representative experimental results show that the proposed system is suited to touch screen.

• Current Optics and Photonics
• /
• 제5권6호
• /
• pp.660-671
• /
• 2021

We present a novel optical system for an augmented reality head-up display (AR HUD) with two virtual images at different conjugates by employing a confocal off-axis two-mirror and introducing the horopter circle. For a far virtual image with large asymmetrical aberrations, we initially obtain an off-axis two-mirror system corrected for these aberrations and compensated for the down angle by configuring its parameters to satisfy the confocal and Scheimpflug conditions, respectively. In addition, this system is designed to reduce the biocular parallax by matching Petzval surface into the longitudinal horopter circle in a near virtual image. This design approach enables us to easily balance the residual aberrations and biocular parallax when configuring the optical system with two different conjugates, which results in an AR HUD available for near and far virtual images together.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2012년도 추계학술대회
• /
• pp.665-668
• /
• 2012

본 논문에서는 스마트폰이나 태블릿 PC등의 매체에서 2차원 적으로 보이는 컨텐츠를 프로젝션 도구를 사용해서 3차원 입체영상으로 볼 수 있게 하는 연구를 했다. 이를 위해 4장의 브라운 유리를 피라미드 모양으로 구성했고, PC로부터 출력되는 4대의 LCD 모니터 화면을 역 피라미드 모양의 거울 4면으로 각각 프로젝션 시켜서 거울의 중심부에 3차원 입체 영상이 나타나게 시스템을 구성했다. 실험은 태블릿 PC와 서버측 PC(데스크탑 PC)를 무선으로 연동시켜, 태블릿 PC에서 선택한 콘텐츠가 서버측 PC에서 실행되어 역 피라미드형 거울의 중심부에 3차원 입체영상으로 보이게 했다. 실험결과 관찰자의 관찰 각도에 따라서 조금 차이가 나지만 2차원 컨텐츠를 3차원적으로 디스플레이 하는 것이 가능함을 보였다.