• Transactions of Materials Processing
• /
• v.14 no.5 s.77
• /
• pp.477-481
• /
• 2005

Wafer scale micro mirror array with high surface quality for small form factor (SFF) optical pick-up was fabricated by micro UV-molding. To replicate micro mirror array for SFF optical pick-up, a high- precision mold was fabricated using micro-machining technology. Wafer scale micro mirror array was UV-molded using the mold and then the process was optimized experimentally. The surface flatness and roughness of UV-molded micro mirror array were measured by white light scanning interferomety system and analyzed the transcribing characteristics. Finally, the measured flatness of UV-molded micro mirror away for SFF optical pick-up, which was fabricated in the optimum processing condition, was less than 70nm.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.1 s.178
• /
• pp.89-96
• /
• 2006

In this study, fabrication of the large area silicon mirror is accomplished by anisotropic wet etching using micromachining technology for implementation of integrated slim optical pickup and the process condition is also established for improving the mirror surface roughness. Until now, few results have been reported about the production of highly stepped $9.74^{\circ}$ off-axis-cut silicon wafers using wet etching. In addition rough surface of the mirror is achieved in case of tong etching time. Hence a novel method called magnetorheolocal finishing is applied to enhance the surface quality of the mirror plane. Finally, areal peak to valley surface roughness of mirror plane is reduced about 100nm in large area of $mm^2$ and it is applicable to optical pickup using infrared wavelength.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.11
• /
• pp.211-220
• /
• 2002

Optical disk drives read information by replacing a laser beam on the disk track. As information has become larger, the more accurate position control of a laser beam is necessary. In this paper, we report the analysis and fabrication of the micro mirror for optical disk drivers. A coupled simulation of gas flow and structural displacement of the micro mirror using the Finite-Element-Method is applied to this. The mirror was fabricated by using MEMS technology. Especially, the process using the lapping and polishing step after the bonding of the mirror and electrode plates was employed for the Process reliability. The mirror size was 2.5mm${\times}$3mm and it needed about 35V for displacement of 3.2 ${\mu}$.

• Journal of KSNVE
• /
• v.9 no.4
• /
• pp.703-713
• /
• 1999

A side mirror is an important safety tool with which the driver can observe objects out of sight. This paper presents an organized design technology for the side mirror of improved vibration characteristics. Resonance response to forced vibration is critical to observability through the mirror to be designed. This study aims at the reduction of vibration level by the modification of mirror structures and consequent effects are predicted by computer simulations. We used a three-dimensional solid modeling and the modal and frequency analysis ; Pro/Engineer is used as a solid modeler; Pro/Mechanica for vibration analysis. The simulation results are compared with those obtained in experiemnts to check the validity by the three-dimensional modeling. The design technique of side mirror has been established and found to be effective in vibration analysis of redesigned parts.

• Journal of the Optical Society of Korea
• /
• v.16 no.1
• /
• pp.80-84
• /
• 2012

A high reflectance mirror, which has very low absorption and scattering loss, was coated onto a crystalline substrate by ion beam sputtering and then annealed at $450^{\circ}C$. We carefully selected the mirror coating material, and designed the high reflectance mirror, in order to avoid UV degradation which comes from the He-Ne plasma. We measured the surface roughness of the Zerodur substrate using phase shift interferometry and atomic force microscopy, and compared it with the TIS scattering of the mirror. The cavity ring-down method was used to measure the absorption of the mirror, and the thin film structure was correlated to its results. We also compared the optical properties of coated mirrors before and after annealing.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.462-467
• /
• 2003

For the Space-borne optical imaging payload system design, light weighting and moderate stiffness of mirror and/or mirror fixation device is very important aspects. The front surface of mirror is regulated by optical performance requirement, but the shape of backplate of mirror is to be optimised while satisfing the required stiffness and weight. According to the results, the best shape of backplate cell is triangular. And also related geometric dimensions and the optimised mounting point of MFD(Mirror Fixation Device) is presented. Finally, natural frequencies and shpaes of mirror structure are analysed.

• Bulletin of the Korean Mathematical Society
• /
• v.57 no.1
• /
• pp.139-165
• /
• 2020

Mirror symmetry for del Pezzo surfaces was studied in [3] where they suggested that the mirror should take the form of a Landau-Ginzburg model with a particular type of elliptic fibration. This argument came from symplectic considerations of the derived categories involved. This problem was then considered again but from an algebro-geometric perspective by Gross, Hacking and Keel in [8]. Their construction allows one to construct a formal mirror family to a pair (S, D) where S is a smooth rational projective surface and D a certain type of Weil divisor supporting an ample or anti-ample class. In the case where the self intersection matrix for D is not negative semi-definite it was shown in [8] that this family may be lifted to an algebraic family over an affine base. In this paper we perform this construction for all smooth del Pezzo surfaces of degree at least two and obtain explicit equations for the mirror families and present the mirror to dP₂ as a double cover of ℙ².

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.7-7
• /
• 2000

This paper describes a mirror control system that can adjust the location of side and room mirror of the vehicle automatically using 3D coordinates to monitor the location of driver's eyes. Through analysis of the image inputted by two B/W CCD camera and infrared lamps installed on top of the driver's dashboard, we can estimate the values of 3D coordinate of the driver's eyes. Using these values, this system can determine the absolute position of each mirror and activate each actuator to the appropriate position. The stereo vision system can detect the driver's eyes whether it is day or night by virtue of infrared Lamps. We have tested this system using 10 drivers who drive a car currently, and most of the drivers were satisfied with the convenience of this system.

• Journal of the Korean Society of Industry Convergence
• /
• v.15 no.2
• /
• pp.43-47
• /
• 2012

In this study, the experiments for surface enhancement of silver mirror substrate were done, where we checked the characteristics of silver mirror substrate made by Tollen's method. The surface enhancement of Bromothymol blue was analyzed by three kind of silver mirror substrates. The assignments of the vibrational bands shown in SERS spectra are given based on both literature and the semi-empirical calculations at the PM3 methods. Finally, we deduced that the adsorption orientation of bromothymol blue was little tilted flat to the silver mirror surfaces by using of the surface selection rules.

• Journal of the Korean Society of Industry Convergence
• /
• v.14 no.1
• /
• pp.23-27
• /
• 2011

In this study, the experiments for surface enhancement of silver mirror substrates were done, where we checked the characteristics of silver mirror substrate made by Tollen's method. The surface enhancement of Eriochrome Black T(EBT) was analyzed by silver mirror substrates. We observed the SERS spectra of EBT. The assignments of the vibrational bands shown in SERS spectra are given based on both literature and the semi-empirical calculations at the PM3 methods. Finally, we deduced that the adsorption orientation of EBT was little tilted perpendicular to the silver mirror surfaces by using of the surface selection rules.