• 전기학회논문지
• /
• 제66권12호
• /
• pp.1725-1731
• /
• 2017

In hysteresis simulation, the Preisach model is most widely used as the reliability. However, since the first-order transition curves used in the conventional Preisach model are very inconvenient for actual measurement, many researches have been made to simplify them. In this study, the minor loops obtained along the initial magnetization curve are used to obtain the Everett function used in the Preisach model. In other words, The Everett table is constructed by using the minor loops, and are applied to the magnetization dependent Preisach model to reconstruct the Everett table. In order to minimize the error, the spline interpolation method is used to complete the final Everett table and the hysteresis loop simulation is performed with the Everett table. Furthermore, it is applied to the inductor analysis to perform not only sinusoidal wave and square wave drive but also PWM wave drive considering hysteresis. The validity of the proposed method is confirmed by comparison with simulation and experiment.

• Journal of Magnetics
• /
• 제1권2호
• /
• pp.69-74
• /
• 1996

Justeresos loops of melt-spun Nd13Fe77B10 cooled down at remanent state were measured at 4.2 K and 250 K. The hysteresis loops were analysed on the basis of the Stoner-Wohlfarth (S-W) model, the inter-grain exchange coupled single domain (SD) model and micromagnetism. The coercivity higher than that predicted from the S-W model and the striking shift of the thin minor loop along the H-axix observed at the fields of Hmax=4MA/m at 4.2 K indicated new evidences for the inter-grain exchange interaction . The S-W model failed in explaining the high iHc and the shift of the thin minor loop. The exchange coupled SD model was found to explain the experimental results qualitatively without difficulties associated with the S-W model. The micromagnetic calculations using a finite element technique simulated the experimental results fairly well quntitatively.

• 한국자기학회지
• /
• 제6권4호
• /
• pp.199-203
• /
• 1996

Co/Pd 다층박막의 자화반전 거동을 조사하기 위하여, 먼저 시료를 자기장 소거법으로 탈자시킨 다음 초기자화 곡선과 minor loops 를 측정하였다. 또한 보자력 및 포화자화는 수직자화곡선으로부터 구하였으며, 수직자기이방성은 온도별로 측정한 수직 및 수평자화곡선의 면적차이를 이용하여 구하였다. 자화반저거동의 분석을 위하여 여러가지 정상적이고 반정량적인 방법을 측정결과에 적용하였다. 이들 결과로부터 본 실험에 사용된 시료의 자화반전의 지배적인 거동은 자벽의 pinning이며, 스퍼터링 압력이 증가할수록 보자력이 증가하는 경향은 Kronmuller 식 $H_{c}$ (T) .var. $r_{o}$ .center dot. $K_{u}$에 의해 설명될 수 있었다.다.다.

• 한국정밀공학회지
• /
• 제22권7호
• /
• pp.94-101
• /
• 2005

This work proposes a new method for describing the hysteresis non-linearity of a piezoelectric actuator. The hysteresis behaviour of piezoelectric actuators, including the minor loop trajectory, are modeled by geometrical relationship between a reference major loop and its minor loops. This hysteresis model is transformed into inverse hysteresis model in order to output compensated voltage with regard to the given input displacement. A feedforward neural network, which is trained by a feedback PID control module, is incorporated to the inverse hysteresis model to compensate unknown dynamics of the piezoelectric system. To show the feasibility of the proposed feedforward-feedback controller, some experiments have been carried out and the tracking performance was compared to that of simple PTD controller.

• Journal of Magnetics
• /
• 제8권2호
• /
• pp.93-97
• /
• 2003

For the induction motor and inverter type motor design, prediction and analysis of core loss including higher harmonics have been studied. In this work, we have generated two symmetrical ac minor loop in the fundamental hysteresis loop whose positions are zero induction region and saturation induction region, and we could pre-dict core loss including higher harmonics inductions. using the following modified superposition principle; $P_c(B_0,f_0,B_h,nf_0)=P_c(B_0,f_0)+(n-1)[K_1(B_0)P_{cL}(B_h,nf_0)+(1-k_1(B_0))P_{cH}(B_h,nf_0)].$Using this equation we could also analyze core losses including higher harmonic induction under different maximum magnetic induction, different amplitude of higher harmonic induction with different harmonic frequencies.

• 수산해양기술연구
• /
• 제26권2호
• /
• pp.118-124
• /
• 1990

PP 로프의 유연도와 모릿줄이 사려지는 현상등을 기초적으로 조사한 다음, 반원형 안내판의 회전중심이 편심되도록 고달이채기 레버를 회전시켜 고달이를 자동으로 채어서 이송벨트에 정리하면서, 모릿줄이 고르게 사려지도록 줄받이의 왕복 회전장치 등을 제작하여 실험실과 통발어선에서 시험한 결과는 다음과 같다. 1. 직경 10mm의 PP 연심 모릿줄이 양승풀리에서부터 사려질 때 한 코일의 최소직경은 14cm 정도, 줄더미의 직경은 60cm 정도였다. 2. 소형 고달이채기에서 이송벨트의 상, 하 10cm이내에 분포하는 고달이의 비율은, 납이 1개 있는 모릿줄에서는 93%정도이나 납이 없는 모릿줄에서는 98%이상이었다. 3. 감속비가 3:1인 소형 고달이채기에서 레버의 회전수 N 하(1) (rpm)과 양승풀리의 회전수 N 하(p) (rpm)와의 관계는 N 하(p) =2.86N 하(1) +23.74 이며, 양승속도에 대한 고달이의 수평최대 이동속도의 비는 70%정도였다. 4. 보조양승기와 고달이채기를 연계시켜 줄받이를 상, 하로 왕복시킬 경우 모릿줄은 길이 방향으로 고루 사릴 수 있었으며, 고달이채기 레버의 회전과 줄받이의 왕복운동 주기는 고달이의 간격에 따라 조절할 수 있다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 하계학술대회 논문집
• /
• pp.619-622
• /
• 1991

In this paper, a digitalization of Induction Motor Vector Control System is proposed, where all processings are executed by using a processor. In Vector Control System, where the motor voltages are controlled by using the motor voltage model, the variation of the rotor flux-interlinkage is very small however the deviation of the torque becomes large. Thus, in order to enhance the torque performance, voltage model based vector control scheme with minor current loops, which can eliminate the high frequency current harmonics is used.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.758_759
• /
• 2009

In the design and analysis of electric machines the precise calculation of iron loss has incredible significance. It is tough to foresee iron losses precisely in machines due to distribution of non sinusoidal flux density. It is necessary to approximate the iron losses for the precise computation of efficiency. This paper presents a novel approach for the prediction of iron losses of the brushless dc (BLDC) motors by considering the effects of minor hysteresis loops in the simplified model. The novel iron loss model results are compared with the simplified model and with finite element method (FEM).

• Journal of Magnetics
• /
• 제4권3호
• /
• pp.73-75
• /
• 1999

By appliying an slternate pulsed magnetic field -generated by using a sequential ignition circuit and a magnet exciting circuit- with peak value of about 10 T to the rod type Nd based magnet Nd2Fe12.7Cr1.3B with length of 5 mm and diameter of 3.6 mm, the basic magnetic properties such as saturation magnetization, residual magnetization, coercivity, maximum energy products, magnetic anisotropy and anisotropic field are investigated with obtaining the major and minor J-H loops of the magnet. The increase in coercivity due to eddy currents in ac measurement of coercivity is calculated considering eddy current loss by analyzing a wave of generating magnetic field. The average coercivity calculated for the magnet is about 12.2 kOe, anisotropy magnetic field and anisotropic constant are measured as 60 kOe 2.43 Mj/$m^3$, respectively.

• 한국자기학회지
• /
• 제5권5호
• /
• pp.631-635
• /
• 1995

Longitudinal magnetic recording process of thin film media was simulated by the 2-D finite element method (FEM). To describe precisely the hysteresis behavior of thin film media, scalar Preisach model was used. In this paper, we discussed the formation of bit patterns and importance of modeling of minor loops in high density recording. The effects of the media coercivity and film thickness on the remanent magnetization and transition shape were investigated.