• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.36 no.6
• /
• pp.735-742
• /
• 2003

In order to develop a logical method for using selective fishing gear, the behaviour and habits of the aquatic animals must be investigated. However, until now, little national research has been carried out to investigate the behaviour and habits of the common octopus (Octopus minor). The purpose of this study henceforth, is to compile necessary behavioral data to develop fishing gear to catch the common octopus. Behaviour and habits of the common octopus were observed while breeding in a water tank from February to May, 2003. The feeding habits of common octopus are more vigorous at night than in the daytime. The common octopus feeds on 1-4 bait crabs per day and consume each crab in 40-50 min. The sensory organs of the common octopus are more influenced by the sense of touch and smell, than by vision. Using live bait is more effective and advantageous than using dead bait, as the common octopus responded more to live bait. The hiding habits of the common octopus were very intensive, as they hid around all the shelters that were provided in this study. They demonstrated territorial behavior and struggled to maintain their sphere of influence. In addition, out of the various colors for shelters and bait supplied, the common octopus preferred light colors.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.40 no.4
• /
• pp.243-247
• /
• 2007

We investigated the reproductive behavior of Octopus minor, order Octopoda, class Cephalopoda under laboratory conditions. Each mature female octopus was kept in an aquarium with a plastic tube for shelter, and one mature male was introduced for the purpose of copulation. Before spawning, the female coated the roof of the shelter with a light-green material, upon which it then fixed its eggs one by one. This spawning behavior lasted 1 to 3 days. Fertilized females spawned 54 eggs on average, ranging from 21 to 112 eggs at 72 to 98 days after copulation. The attached eggs were 18.1-19.0 mm in length, 5.0-6.1 mm in width, and 0.30-0.38 g in weight. The mother octopods did not feed; they attended to the eggs by using their arms to rub the egg surfaces and used their funnel to blow sediments off of the eggs. At water temperatures of $20.9-21.5^{\circ}C$, the fertilized eggs hatched within 73 to 90 days after being spawned. The effective cumulative water temperature was $1,569-1,892^{\circ}C$. At the end of incubation, the body weight of the mother octopods was reduced to approximately 56% of the initial weight, and most mother octopods died soon after the young hatched.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.7 no.10
• /
• pp.17-27
• /
• 1984

In order to foster the minor enterprises effectively we will have to take a proper step to control and adjust the excessive competitions of large-enterprises and minor as well as among minor enterprises, We should promote the relationship serialized between minor - and large - enterprises and establish mediation and control organizations and governmental policies to create re-subcontract among small and medium enterprises. To help the development of medium md small enterprises in Jeon-Buk area, therefore, Kunsan city should be designated as a Growth Position City. The reason is as follows. 1) Because Kunsan is located in Middle Western Seaside geographycally, and in the central place of our country as a key point of sea-transportation, we can cultivate the national land widely. 2) As an ocean gateway city of Kum River basin, Kunsan is a good place that can reform Hoh-nam inland of Kwang-iu, Jeon-ju, I-ri, and like places as well as central inland area of Dae-jeon, Chong-ju, etc.. 3) Kunsan is an advanced-base for constituting an industrial region of Weatern roast that has a spacious coastral industrial region and is connected with inland industrial park of Jeon-ju and I-ri and Jang-hang, Bi-in, etc.. From the above reason. Kunsan should be designated as a growth position city that can induce and promote the development of center of Western coast.

• Nuclear Engineering and Technology
• /
• v.52 no.10
• /
• pp.2274-2284
• /
• 2020

The Nuclear Fuel Cycle Code "ANICCA" has been developed by SCK•CEN to answer particular questions about the Belgian nuclear fleet. However, the wide range of capabilities of the code make it also useful for international or regional studies that include advanced technologies and strategies of cycle. This paper shows the main features of the code and the facilities that can be simulated. Additionally, a comparison between several codes and ANICCA has also been made to verify the performance of the code by means of a simulation proposed in the last NEA (OECD) Benchmark Study. Finally, a case study of the Belgian nuclear fuel cycle phase out has been carried out to show the possible impact of the transmutation of the minor actinides on the nuclear waste by the use of an Accelerator Driven System also known as ADS. Results show that ANICCA accomplishes its main purpose of simulating the scenarios giving similar outcomes to other codes. Regarding the case study, results show a reduction of more than 60% of minor actinides in the Belgian nuclear cycle when using an ADS, reducing significantly the radiotoxicity and decay heat of the high-level waste and facilitating its management.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.1
• /
• pp.108-114
• /
• 2015

In this paper, we propose a different kind of Beacon signals transmission and receipt scheme to express more information in existing iBeacon. Because the user can only use Major and Minor of iBeacon, information available for the user is limited to 4byte. The proposed scheme makes it possible to use more information by transmitting consecutively a different kind of Beacon signals that major and minor are different. When it comes to using more information of iBeacon, it is possible to recognize people and objects using iBeacon and utilization range of iBeacon is widened further. Also, we verify operation of the proposed scheme through application implementation.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.12
• /
• pp.1725-1731
• /
• 2017

In hysteresis simulation, the Preisach model is most widely used as the reliability. However, since the first-order transition curves used in the conventional Preisach model are very inconvenient for actual measurement, many researches have been made to simplify them. In this study, the minor loops obtained along the initial magnetization curve are used to obtain the Everett function used in the Preisach model. In other words, The Everett table is constructed by using the minor loops, and are applied to the magnetization dependent Preisach model to reconstruct the Everett table. In order to minimize the error, the spline interpolation method is used to complete the final Everett table and the hysteresis loop simulation is performed with the Everett table. Furthermore, it is applied to the inductor analysis to perform not only sinusoidal wave and square wave drive but also PWM wave drive considering hysteresis. The validity of the proposed method is confirmed by comparison with simulation and experiment.

• Journal of Korean Institute of Industrial Engineers
• /
• v.40 no.4
• /
• pp.404-414
• /
• 2014

Yield prediction is important to manage semiconductor quality. Many researches with machine learning algorithms such as SVM (support vector machine) are conducted to predict yield precisely. However, yield prediction using SVM is hard because extremely imbalanced and big data are generated by final test procedure in semiconductor manufacturing process. Using SVM algorithm with imbalanced data sometimes cause unnecessary support vectors from major class because of unselected support vectors from minor class. So, decision boundary at target class can be overwhelmed by effect of observations in major class. For this reason, we propose a under-sampling method with minor class based SVM (MCSVM) which overcomes the limitations of ordinary SVM algorithm. MCSVM constructs the model that fixes some of data from minor class as support vectors, and they can be good samples representing the nature of target class. Several experimental studies with using the data sets from UCI and real manufacturing process represent that our proposed method performs better than existing sampling methods.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.57 no.3
• /
• pp.185-193
• /
• 2021

This study was conducted to evaluate the performance of the octopus pot according to mesh sizes. Entering behavior of Octopus minor and bait (Macrophthalmus japonicus) escape rate on the mesh sizes of the pots were investigated for six times in indoor tank. The sea trials for evaluating the performance of Octopus minor pot to different mesh sizes (22, 20 and 18 mm) were conducted for six times from 2017 to 2018 in the coastal sea of Deukyang Bay, the Republic of Korea. Behavior patterns of contact pot to leaved pot were more frequent than contact pot to bait search. When the octopus contacted to the pot, there was no clear search behavior to distinguish the mesh sizes. Total catch of 46% was accounted for 18 mm pots, followed by 34% at 20 mm and 20% at 22 mm (P < 0.05). Catch per unit effort was calculated as 30 g/pot at 22 mm, 44 g/pot at 20 mm and 59 g/pot at 18 mm. As a result of evaluating 50% selection of mantle length and weight on the mesh sizes, mantle length (mm) and weight (g) were 84.6 and 147.8 in 22 mm, followed by 20 and 18 mm.

• Journal of Veterinary Science
• /
• v.21 no.6
• /
• pp.86.1-86.8
• /
• 2020

Background: Dicyemids are parasites found in the renal sac of cephalopods. The first species of dicyemid was found from kidneys of the Korean common octopus Callistoctopus minor. Objectives: This study aimed to identify the dicyemid and investigate the effect on renal sac of host. Methods: In this study, we compared the morphological characteristics of isolate to dicyemids (Dicyema sphyrocephalum, Dicyema clavatum, and Dicyema dolichocephalum) reported from C. minor in Japan. We compared the 18S ribosomal RNA (rDNA) and cytochrome c oxidase subunit I (COI) sequences of isolate to the sequences of D. shyrocephalum and D. clavatum. The infected octopuses renal tissues were histologically compared with the tissues of uninfected individuals. Results: The morphological characteristic of this isolated species corresponds to D. sphyrocephalum. The sequences similarities of 18S rDNA and COI gene of isolate are 99.7% and 98.1% with D. sphyrocephalum. We observed morphological changes in the epithelia folds of kidney at the dicyemids attached areas. Conclusions: The present study identified the isolate as D. sphyrocephalum and this is the first report of dicyemid species from Republic of Korea. Further studies on the effects of dicyemids on growth and health status of cephalopods will be needed.

• Journal of Digestive Cancer Research
• /
• v.4 no.2
• /
• pp.113-121
• /
• 2016

Background: We evaluated technique of hepatic resections using suprahilar-extrafascial dissection of Glissonean pedicle with vascular stapling device for pedicle transection with intent to minimize operative time and blood loss. Methods: We analyzed the clinical records of 326 patients who underwent anatomic liver resection by suprahilar-extrafascial pedicle isolation with vascular stapling division technique. Results: The minor liver resections were associated with significantly shorter surgery duration (105.1±21.1 vs. 225.6±75.6) and transection time (40.1±14.5 vs. 96.3±55.2) than major hepatectomies (p<0.0001 for all). The mean blood loss was 350.8±100.5 mL in minor resection and 485.4±250.2 mL in major resection (p=0.001). The mean blood transfusion requirement was 400.8±109.5 mL for minor resections and 550.9±100.0 mL for major hepatectomy (p=0.072). There was no significant difference in morbidity and mortality between groups (p=0.980; p=0.945). Major as well as minor liver resection were oncology superior with no significant difference in the 5-year overall survival rates. Conclusion: Suprahilar-extrafascial dissection of Glissonean pedicle represents an effective and safe technique of liver resection. Presented approach allows early and easy ischemic delineation of appropriate liver territory to be removed with selective inflow vascular control. It is not time consuming and it is very useful in re-resection, as well as oncological reasonable.