• Transactions of The Korea Fluid Power Systems Society
• /
• v.2 no.2
• /
• pp.1-7
• /
• 2005

For the reliability evaluation of the track drive unit(TDU), firstly, we analyzed the major failure modes through FMEA(failure mode & effects analysis), FTA(failure tree analysis), and 2-stage QFD(quality function deployment), and then quantitatively determined the priority order of test items. The Minitab analysis was also performed for prediction of life distribution and parameters of TDU by use of field failure data collected from 430 excavators for two years. In addition, we converted the fluctuation load in field conditions into the equivalent load, and for evaluation of the accelerated lift by the cumulative fatigues, the equivalent load is again divided into the fluctuation load by reference of test time. And then, by use of the test method in this paper, the acceleration factor(AF) of needle bearing inside planetary gear which is the most weakly designed part of TDU is achieved as 5.3. This paper presents the quantitative selection method of test items for reliability evaluation, the determination method of the accelerated life test time, and the method of non-failure test time based on a few of samples. And, we proved the propriety of the proposed methods by experiments using a TDU for a 30 ton excavator.

• International Journal of Advanced Culture Technology
• /
• v.3 no.2
• /
• pp.1-14
• /
• 2015

The purpose of this paper is to reveal two problems in the existing inventory systems in retail market, and to suggest a Two-Bin System under Automatic Ordering System considering only base-stock. Large retailers already have a sophisticated inventory system based on an automatic ordering principle. However, why does the out-of-stock (OOS) happen in large discount stores in spite of having a good inventory system? This paper suggests two systems after finding the root causes concerning the previous question. For evaluating the performance of each system, the random 200 data set in each sample group was generated from MINITAB 16 and obeyed the Poisson distribution. The existing inventory system in retail market cannot help generating OOS due to indwelling contradiction in itself. The reasons are the ordering deadline and the relationship between ordering quantity and base stock. This paper also demonstrates that these previous studies on inventory fall into the closed loop. Also the paper shows that the performance of the replenishment policy was better than traditional methods dealing with ordering quantity and base stock.

• Journal of the Korean Society of Safety
• /
• v.26 no.6
• /
• pp.79-84
• /
• 2011

There have been so many studies related to job stress or musculoskeletal disorders(MSDs) in the shipbuilding industry. However, study of employee performance evaluation that reflect on the industrial features of the deckhouse manufacturing industry has not been established. Therefore, this study aimed to evaluate workers' job stress and work ability through statistical significance tests according to age, work types, years of service, work forms and sex. For this, the study conducted a job stress test using the Korean Occupational Stress Questionnaire Short Form, and employee performance evaluations using the Work Ability Index(WAI) of the Finnish Institute of Occupational Health (FIOH) on 536 workers in the deckhouse manufacturing industry. MINITAB statistics program was used for statistics analysis and significance was verified with the Kruskal-Wallis test, a corporate body of nonparametric statistical analysis. As a result, employee performance had significant differences, depending on age, work types, years of service and sex, and job stress also depended on the number of service year and work form. Additionally, it was found that employee performance decreased more as job stress increased.

• Proceeding of EDISON Challenge
• /
• 2016.03a
• /
• pp.434-442
• /
• 2016

Jansen mechanism is composed of mechanical walking linkages that are designed and optimized by Theo Jansen in 1990. Although he has made optimum values for linkage dimensions for Jansen Mechanism, there are still various applications for this mechanism and also various optimum values for each application. In this paper, Jansen Mechanism optimization has been processed for the Science Box. The Science Box has its own linkage dimensions and related components and makes space for optimization process. For the optimization 3 to 4 linkage were selected which had no similar ratios of linkages between other applied Jansen mechanisms and to reduce experiment numbers. Response Surface Method was used with Minitab 17 for optimization and m.sketch was used for experimentation. Intuitive method had to be used to find optimum values as with RSM optimum value could not be found. EDISON Designer was used to make final CAD model with optimum values and laser cutter was used to get appropriate acryl panels for legs.

• Proceedings of the KIEE Conference
• /
• 2007.11a
• /
• pp.108-109
• /
• 2007

Microstructure and electrical properties of Ga-doped ZnO (GZO) films grown on $Al_2O_3$ templates by Pulsed Laser Deposition (PLD) are investigated utilizing X-ray diffraction method and Hall measurement, respectively. In order to determine the optimized operating condition of the PLD, statistical design of experiment (DOE) is employed. It provides the systematic and efficient methodology for characterization and modeling of PLD processing with a relatively small number of experiments. The most optimized recipe of the process factors is obtained by response optimizer in Minitab.

• International Journal of Highway Engineering
• /
• v.15 no.6
• /
• pp.69-78
• /
• 2013

PURPOSES : In this study blast furnace slag, an industrial byproduct, was used with an activating chemicals, $Ca(OH)_2$ and $Na_2SiO_3$ for carbon capture and sequestration as well as strength development. METHODS : This paper presents the optimized mixing design of Carbon-Capturing and Sequestering Activated Blast-Furnace Slag Mortar. Design of experiments in order to the optimized mixing design was applied and commercial program (MINITAB) was used. Statistical analysis was used to Box-Behnken (B-B) method in response surface analysis. RESULTS : The influencing factors of experimental are water ratio, Chemical admixture ratio and Curing temperature. In the results of response surface analysis, to obtain goal performance, the optimized mixing design for Carbon-Capturing and Sequestering Activated Blast-Furnace Slag Mortar were water ratio 40%, Chemical admixture ratio 58.78% and Curing temperature of $60^{\circ}C$. CONCLUSIONS : Compared with previous studies of this experiment is to some extent the optimal combination is expected to be reliable.

• Journal of Korean Society for Quality Management
• /
• v.30 no.4
• /
• pp.86-93
• /
• 2002

There are many different factors used in calculating control limits of control chart for variable data. Specially these factors are divided into two groups such as "no given standard" and "given standard"(namely, for analysis and management), but many kind of factors give rise to confusion. Therefore, It is necessary to manifest relationships among factors for easy application regardless of subgroup size. Many SQC textbooks show us plainly these factors, but do not have enough for adequate explanation of relationships among factors. Besides, notation of these factors of SQC textbook isn't coincide with another one, so necessity to the coincidence for the notation of the factors is highlighted during my work recently. In this study, the close examination about relationships among various factors (A-A3, B3-B6, D1-D4, C4, d2, d3 etc) was carried out. Spread sheet results are presented for getting factors according to subgroup size, by grouping as the case of "no given standard" and "given standard". How are these factors to be applied in statistical package (ex, Minitab) have been analyzed using a series of sample data. analyzed using a series of sample data.

• Journal of the Korean Solar Energy Society
• /
• v.36 no.1
• /
• pp.1-9
• /
• 2016

To well design the solar energy system, the correlation to calculate and predict solar irradiation is basically needed. So, this study was performed to reveal the relationships between the solar irradiation and four meteorological observation data(dry-bulb temperature, relative humidity, duration of sunshine, and amount of cloud) that didn't show from previous any other researches. And then, we finally proposed the various order non-linear correlation from the measured solar irradiation and four meteorological measurement data using MINITAB. To show the deviation and accuracy of the solar irradiation between measured and calculated, this study compared for the daily total solar insolation. From those results, the calculation error could well predicted about maximum 97% for the daily total solar insolation. But, the coefficients of the proposed correlations didn't show any relationships. So, needs more studies to make the proper one correlation for the country.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.45 no.5
• /
• pp.788-803
• /
• 2021

This study aims to obtain basic data to develop clothes for dementia patients by classifying types of dementia patients. Data was collected from those dementia patients who entered a nursing home. This study analyzed a total of 221 sheets. Furthermore, descriptive statistics, cross-tabulation, and K-means clustering were performed for statistical processing using Minitab 14. As a result, dementia patients were classified into four types: inactive-dependent, active-problematic behavior, activity-autonomy, and inactive-offensive. Inactive-dependent type was a group with the most severe disability in cognitive and daily activity functions; however, they lacked behavioral and psychological symptoms and problematic behavior with clothes. Active-problematic behavior type showed the most behavioral and psychological problems and problematic behavior with clothes. Activity-autonomy type was a group without any problematic behaviors. Moreover, the inactive-offensive type had very good cognitive function toward humans. The study imply that it is necessary to provide clothes with proper functions based on the types of patients rather than providing them uniform clothes because clinical and clothes behaviors differ significantly depending on the types of dementia patients.

• International Journal of Internet, Broadcasting and Communication
• /
• v.15 no.1
• /
• pp.140-144
• /
• 2023

In recent years, there are so many serious crashes involving coaches, especially the frontal collision occupies 40% of the front of the vehicle, Frontal collisions account for 100% of the front of the vehicle affecting the driver and side-impact collisions that injure the person in the vehicle. Therefore, the research into improving and optimizing the structure is necessary for risk of injury for passengers in frontal accidents. In this paper, we have designed a Shock absorber that can absorb collision energy. Research using HYPERMESH software. to build the finite element model and calculate the meshing to suit the mesh size of 5mm. apply LS-DYNA software to calculate structural strength. In the study, for a vehicle to collide with a hard obstacle occupying 100% of the head of the vehicle. Then, the experimental design method, Minitab is used for find the structural parameters in the design. Improvement results showed that the acceleration of the impact on passengers and the driver is decreased by 55,17%. The mass of texture improvements is reduced by 11%, according to the requirements of European Standards ECE R94.