• 한국전기전자재료학회논문지
• /
• 제21권10호
• /
• pp.938-942
• /
• 2008

Electrical and optical properties of semitransparent Ag and Al layer were studied, which are used for the electrodes in top-emission organic light-emitting diodes. Sheet resistance and transmittance of visible light through a thin layer were measured and analyzed. Several thin metal layers of Ag and Al were deposited onto a glass substrate up to a thickness of 50 nm using a thermal evaporation. Sheet resistance measurements show that a layer thickness is needed more than 15 nm and 20 nm for Ag and Al, respectively, when a proper sheet resistance is assumed to be less than $50{\Omega}/sq$. From the measurements of transmittance of visible light through a thin-metal layer, metallic behavior was observed when the layer thickness is over 25 nm for both films. Thus, from a study of sheet resistance and transmittance of visible light, a minimum proper thickness of semitransparent metal layer is 20 nm and 25 nm for Ag and Al, respectively.

• 한국세라믹학회지
• /
• 제34권7호
• /
• pp.738-746
• /
• 1997

MgO clinker and two kinds of dolomite clinkers with different microstructures and CaO contents were used as starting materials, and the effects of Fe2O3 addition on the properties of MgO and dolomite were investigated in the range of 2 to 8 wt% of Fe2O3 content. Secondary phases contributed to densification of MgO-Fe2O3 and dolomite-Fe2O3 were magnesioferrite and dicalciumferrite, respectively. Sinterabilities of MgO-Fe2O3 and dolomite-Fe2O3 were directly proportional to the amount of secondary phases. Also, sinterability of dolomite itself was dependent on the microstructure of starting material including distribution of CaO and MgO as well as the addition amount of Fe2O3. The flexural strength of MgO-Fe2O3 content was almost constant. The hydration resistance of dolomite with large size of MgO and discontinuous distribution of CaO was higher than that of dolomite with small size of MgO and continuous distribution of CaO. Also, the minimum content of Fe2O3 to prevent they hydration of dolomite was about 4wt%. As increasing Fe2O3 content, the penetration resistance of MgO-Fe2O3 was improved by the increment of magnesioferrite. On the other hand, the penetration resistance of dolomite-Fe2O3 was decreased because of the increment of dicalciumferrite having low melting point.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2003년도 춘계학술대회 논문집
• /
• pp.37-42
• /
• 2003

Fundamental Study for optimizing ship hull form using SQP(sequential quadratic programming) method in a resistance point of view is presented. The Wigley hull is used as an initial hull and numerical calculations are carried out according to various froude numbers. To obtain the ship resistance the wave resistance is evaluated by a Rankine source panel method with nonlinear free surface conditions and the ITTC 1957 friction line is used to predict the frictional resistance coefficient. The geometry of a hull surface is represented and modified by B-spline surface patch. The displacement and the waterplane transverse 2nd moment of inertia of the hull is fixed during the optimization process. And the shp design program called EzHULL is used to draw the lines of the optimized hull form to perform the model test.

• Smart Structures and Systems
• /
• 제28권6호
• /
• pp.737-744
• /
• 2021

In this study, structural health monitoring (SHM) methods of carbon fiber reinforced plastics (CFRPs) were investigated using electrical resistance. The developed sensing technique monitored electrical resistance in accordance with the impact damage of a CFRP. The changes in electrical resistances with multiple electrode sets enabled SHM without extra sensors so that this technique can be called self-sensing. Moreover, this study proposed electrodes only at peripheral side of a structure to minimize the number of electrodes compared to those in an array which has square number of sensors as the sensing area increases. For the intensive investigation, electromechanical sensitivity in terms of electrode distance was analyzed and optimized under drop weight impact testing. Then, SHM methods with electrodes in an array and electrodes in peripheral edges were comparatively investigated. The developed methods successfully localized impact damages into 2D coordinates. Furthermore, damage severity can be shown with a damage map by calculating electrical resistance change ratio. Therefore, structural health self-sensing system using electrical resistance was successfully developed with the minimum number of electrodes.

• 미생물학회지
• /
• 제46권2호
• /
• pp.148-151
• /
• 2010

동물성 식품 유래 장구균의 에리스로마이신 내성 유전자형 및 표현형을 분석하고자 하였다. 경기북부지역의 축산 농가 15곳으로부터 원유 시료 378개를 분양받아 본실험에 사용하였으며 에리스로마이신 내성 장구균 분리에 사용하였다. 총 110균주의 장구균이 분리 되었으며 이중 E. faecalis가 101균주, E. avium이 7균주, E durans가 2균주였다. 에리스로마이신에 대한 내성 비율은 65.45%였으며 $MIC_{50}$은 16 ${\mu}g$/ml, $MIC_{90}$은 64 ${\mu}g$/ml이었다. 분리된 장구균 110균주 모두 erm(B) 유전자를 소유하고 있었으며 75.45%인 83균주가 mef(A)를 소유하고 있음을 확인하였다. 표현형 분석에 따르면 지속성 내성($cMLS_B$)을 나타내는 균주는 95균주(86.36%)였으며 유도내성 ($iMLS_B$)을 보이는 균주는 15균주(13.34%)였다.

• 대한치과보철학회지
• /
• 제32권2호
• /
• pp.195-211
• /
• 1994

The purpose of this study was to evaluate the fracture resistance of the four kinds of dental porcelains for the all-ceramic crown(Vita In-Ceram, Vita Hi-Ceram, IPS-Empress, Vitadur-N) and one kind for the metal-ceramic non(Vita VMK 68) was used as the control group. In order to determine the fracture resistance, the hi-axial flexure strength was measured at a crosshead speed of 0.5mm/min, and the Vickers hadrness was measured at an indentation load of 1kg for 20 seconds. The results obtained were summarized as follows ; 1. The maximum Weibull modulus of 24.61 for Vitadur-N and the minimum one of 852 for IPS-Empress were observed ; the maximum characteristic strength of 353.26MPa for Vita In-Ceram and the minimum that of 63.20MPa for Vitadur-N were also observed. 2. The maximum mean bi-axial flexure strength of 339.12MPa for Vita In-Ceram and thd minimum one of 61.99MPa for Vitadur-N were calculated. Results of the Scheffe test indicated that the statistically significant difference(P<0.05) existed between Vita In-Ceram or Vita Hi-Ceram and the others ; also between IPS-Empress and Vitadur-N. 3. The maximum mean hardness of $980.55kg/mm^2$ for Vita VMK 68 appeared. Results of the Scheffe test indicated that statistically significant difference(P<0.05) existed between Vita In-Ceram or Vita Hi-Ceram and the others ; also between IPS-Empress and Vita VMK 68.

• 한국해양공학회지
• /
• 제36권2호
• /
• pp.83-90
• /
• 2022

This paper presents the minimum submergence depth of an underwater vehicle that can remove the effect of free surface on the resistance of the underwater vehicle. The total resistance of the underwater vehicle in fully submerged modes comprises only viscous pressure and friction resistances, and no wave resistance should be present, based on the free surface effect. In a model test performed in this study, the resistance is measured in the range of 2 to 10 kn (1.03-5.14 m/s) under depth conditions of 850 mm (2.6D) and 1250 mm (3.8D), respectively, and the residual resistance coefficients are compared. Subsequently, resistance analysis is performed via computational fluid dynamics (CFD) simulation to investigate the free surface effect based on various submergence depths. First, the numerical analysis results in the absence of free surface conditions and the model test results are compared to show the tendency of the resistance coefficients and the reliability of the CFD simulation results. Subsequently, numerical analysis results of submergence depth presented in a reference paper are compared with the model test results. These two sets of results confirm that the resistance increased due to the free surface effect as the high speed and depth approach the free surface. Therefore, to identify a fully submerged depth that is not affected by the free surface effect, case studies for various depths are conducted via numerical analysis, and a correlation for the fully submerged depth based on the Froude number of an underwater vehicle is derived.

• Geomechanics and Engineering
• /
• 제7권3호
• /
• pp.263-277
• /
• 2014

In the conventional design of retaining structures in a seismic zone, seismic inertia forces are commonly assumed to act upwards and towards the wall facing to cause a maximum active thrust or act upwards and towards the backfill to cause a minimum passive resistance. However, under certain circumstances this design approach might underestimate the dynamic active thrust or overestimate the dynamic passive resistance acting on a rigid retaining structure. In this study, a new analytical method for dynamic active and passive forces in c-${\phi}$ soils with an infinite slope was proposed based on the Rankine earth pressure theory and the Mohr-Coulomb yield criterion, to investigate the influence of seismic inertia force directions on the total active and passive forces. Four combinations of seismic acceleration with both vertical (upwards or downwards) and horizontal (towards the wall or backfill) directions, were considered. A series of dimensionless dynamic active and passive force charts were developed to evaluate the key influence factors, such as backfill inclination ${\beta}$, dimensionless cohesion $c/{\gamma}H$, friction angle ${\phi}$, horizontal and vertical seismic coefficients, $k _h$ and $k_v$. A comparative study shows that a combination of downward and towards-the-wall seismic inertia forces causes a maximum active thrust while a combination of upward and towards-the-wall seismic inertia forces causes a minimum passive resistance. This finding is recommended for use in the design of retaining structures in a seismic zone.

• 대한약침학회지
• /
• 제22권1호
• /
• pp.49-54
• /
• 2019

Objective: Antibiotic resistance is a global health problem and threatens health of societies. These problems have led to a search for alternative approaches such as combination therapy. The aim of the present study was to investigate the effect of caffeine and omeprazole in combination with gentamicin or ciprofloxacin against standard and clinically resistant isolates of Staphylococcus aureus and Escherichia coli. Methods: The minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) values of different agents against bacterial strains were determined. The interaction of non- antibiotic drugs with gentamicin and ciprofloxacin was studied in vitro using a checkerboard method and calculating fraction inhibitory concentration index (FICI). Verapamil as efflux pump inhibitor was used to evaluate the possible mechanism of bacterial resistance to antibiotics. Results: The MIC and MBC values of gentamicin against bacterial strains were in the range of $20-80{\mu}g/ml$ and $40-200{\mu}g/ml$, respectively. Caffeine and omeprazole had no intrinsic inhibitory activity against tested microorganisms. However, upon combination of caffeine with antibiotics, the synergistic effects were observed. Verapamil was able to reduce the MIC values of gentamicin (4 folds) only in some bacterial strains. Conclusion: These findings indicated that caffeine was effective in removing bacterial infection caused by S. aureus and E. coli. The relevant mechanisms of antibiotic resistance were not related to the drug efflux.

• 해양환경안전학회지
• /
• 제23권5호
• /
• pp.566-573
• /
• 2017

고속 활주선에서 차인은 활주자세 변화 뿐 아니라 선체의 균형을 잡아주는 역할을 하며, 저항성능에 큰 영향을 미친다. 그러나 이러한 차인의 설계는 배수량, 선저경사각, 흘수, 선폭 등 다양한 설계 인자들에 영향을 받는 변수로 많은 경험을 필요로 한다. 본 연구에서는 경험식이 아닌 계산을 통해 차인에 대한 설계 시 형상에 대한 기본적인 지침 마련을 목적으로 고속 활주선의 차인의 형상에 따른 저항성능에 대해 계산하였다. 설계는 상용 설계 프로그램인 Yacht-one을 이용하였으며, 유동해석은 상용 해석프로그램인 STAR-CCM+으로 DFBI(Dynamic Fluid Body Interaction)방법을 적용하여 수행하였다. 초기 설계 차인 각도인 17도를 기준으로 차인 15도, 차인 16도, 차인 19도로 변경하여 설계 속도인 30노트에서 해석을 수행하였다. 그 결과, trim은 4개의 차인 중 16도가 가장 컸으며, heave는 차인 15도에서 가장 우수하였다. 해석 결과를 봤을 때 저항 측면에서 초기 설계 각도인 차인 17도 보다 차인 16도가 우수함을 보이고 있어 실제 설계 시 초기 설계 각도에서 +2도, -2도의 범위로 계산을 통해 저항 성능과 자세에서 우수한 차인을 선택해야 함을 알 수 있다.