• Journal of Korean Association for Spatial Structures
• /
• v.4 no.3 s.13
• /
• pp.65-75
• /
• 2004

A shell structure, having a curvature with a curved surface, is an extremely efficient mechanical creation regard to the external load. A basic structural resistance mechanism is the structural system, which is resisted the out-of-plane direction load by in-plane forces using the structure's curvature. Therefore, it has a merit to make thin and lightweight large spacial structures using minimum materials. Among the large spare structural system, the rapid development of the membrane structures, cable structures and the hybrid structures are watched recently. But, this kind of structural system shows the unstable phenomenon by snap-through or bifurcation according to the shape of structure, and the understanding of the collapse mechanism by this phenomenon is very important to the design process. In this study, I investigated the unstable characteristics of the Geiger-type, Zetlin-type and flower-type hybrid cable dome structures, which is the lightweight hybrid structures using compression and tension elements continuously, according to the difference of structural system.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.11
• /
• pp.1423-1428
• /
• 2013

In this study, a heat dissipation measurement system is developed to analyze a 1.2-kW BLDC motor. It is important to check the temperature of the motor because an increase in temperature causes problems in the motor insulations, which in turn influences the motor life. A generator for a vehicle is installed to set up a load. We changed the load from 165 to 495 W. While the rpm varies from 2000 to 4000 under various load conditions, the changes in temperature were measured for the operating period by using a thermocouple. The results of experiments conducted under natural convection conditions suggest that the temperature was not stationary with the rpm, load, and coil of the motor and it kept increasing over $120^{\circ}C$. However, under forced convection conditions, the temperature stationarily reached $84^{\circ}C$ after 4000 s. The difference between the maximum and the minimum temperatures was $10-26^{\circ}C$ with an increase in the rpm and load. The orders of high temperature were as follows: motor coil (Ch#1), side of motor surface (Ch#5), inside of motor cap (Ch#2), upper side of motor surface (Ch#4), and inner wall of the motor (Ch#3).

• Water for future
• /
• v.24 no.1
• /
• pp.119-128
• /
• 1991

This study was focused on establishing the concepts of the instream flow to prevent the problems for the conceptual ambiguity and the difference in the instream flow estimation methods. The average drought flow is defined as the flow required to guarantee the minimum function of the river such as prevention of drying. The environmental control flow is defined as the flow required to control optimal river environment, the flow required for navigation, prevention of sea water-intrusion, protection of river management facilities, conservation of water Quality, fishing, prevention of river mouth closure, control of groundwater level, protection of animals and plants, and landscape. The average drought flow was obtained by flow duration analysis for the natural flows in the Han River at Indo-Bridge gaging station. When considering the 9 factors related to environment conservation, the conservation of water quality was proved to be most important. The pollutants for the river flows were estimated and the water qualities were forecasted. After comparing the water qualities in the future and water quality standards, there quired optimal dilution flow was estimated. The average drought flow and environmental control flow are all non-consumptive flows. Therefore larger flow between them, i.e., Max. (average drought flow, environmental control flow) can be the instream flow. The river management flow can be added to the flows for water utilization in the downstream. The results from this study are expected to be very helpful in the systematic river management on the other main rivers in Korea.

• Journal of International Society for Simulation Surgery
• /
• v.2 no.1
• /
• pp.26-32
• /
• 2015

Purpose When a surgeon examines the morphology of skull of patient, locations of craniometric landmarks of 3D computed tomography(CT) volume are one of the most important information for surgical purpose. The locations of craniometric landmarks can be found manually by surgeon from the 3D rendered volume or 2D sagittal, axial, and coronal slices which are taken by CT. Since there are many landmarks on the skull, finding these manually is time-consuming, exhaustive, and occasionally inexact. These inefficiencies raise a demand for a automatic localization technique for craniometric landmark points. So in this paper, we propose a novel method through which we can automatically find these landmark points, which are useful for surgical purpose. Materials and Methods At first, we align the experimental data (CT volumes) using Frankfurt Horizontal Plane (FHP) and Mid Sagittal Plane(MSP) which are defined by 3 and 2 cranial landmark points each. The target landmark of our experiment is the anterior nasal spine. Prior to constructing a statistical cubic model which would be used for detecting the location of the landmark from a given CT volume, reference points for the anterior nasal spine were manually chosen by a surgeon from several CT volume sets. The statistical cubic model is constructed by calculating weighted intensity means of these CT sets around the reference points. By finding the location where similarity function (squared difference function) has the minimal value with this model, the location of the landmark can be found from any given CT volume. Results In this paper, we used 5 CT volumes to construct the statistical cubic model. The 20 CT volumes including the volumes, which were used to construct the model, were used for testing. The range of age of subjects is up to 2 years (24 months) old. The found points of each data are almost close to the reference point which were manually chosen by surgeon. Also it has been seen that the similarity function always has the global minimum at the detection point. Conclusion Through the experiment, we have seen the proposed method shows the outstanding performance in searching the landmark point. This algorithm would make surgeons efficiently work with morphological informations of skull. We also expect the potential of our algorithm for searching the anatomic landmarks not only cranial landmarks.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.10
• /
• pp.79-89
• /
• 2019

While most research focuses on the k-nearest neighbors (kNN) queries in the database community, an important type of proximity queries called k-farthest neighbors (kFN) queries has not received much attention. This paper addresses the problem of finding the k-farthest neighbors in road networks. Given a positive integer k, a query object q, and a set of data points P, a kFN query returns k data objects farthest from the query object q. Little attention has been paid to processing kFN queries in road networks. The challenge of processing kFN queries in road networks is reducing the number of network distance computations, which is the most prominent difference between a road network and a Euclidean space. In this study, we propose an efficient algorithm called FANS for k-FArthest Neighbor Search in road networks. We present a shared computation strategy to avoid redundant computation of the distances between a query object and data objects. We also present effective pruning techniques based on the maximum distance from a query object to data segments. Finally, we demonstrate the efficiency and scalability of our proposed solution with extensive experiments using real-world roadmaps.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.21 no.6
• /
• pp.55-69
• /
• 2018

As disaster risk and climate change volatility increase, there are more efforts to adapt to disasters such as forest fires, floods, and landslides. Most of the research, however, is about influence of human activities on disaster and there is few research on disaster adaptation for species. Previous studies focusing on biodiversity in selecting conservation areas have not addressed threats of disaster in the habitats for species. The natural disasters sometimes play role of drivers of ecological successions in the long run, but they might cause serious problems for the conservation of vulnerable species which are endangered. The purpose of this study is to determine whether soil loss (SL) is effective in selecting habitat management areas for amphibians and reptiles. RUSLE model was used to calculate soil loss (SL) and the distribution of each species (SD) was computed with MaxEnt model to find out the biodiversity index. In order to select the habitat management area, we estimated the different results depending if value of soil loss was applied or not by using MARXAN, a conservation priority selection tool. With using MARXAN, conservation goals can be achieved according to the scenario objectives, and the study has been made to meet the minimum habitat area. Finally, the results are expressed in two; 1) the result of soil loss and biodiversity with MATRIX method and 2) the result of regional difference calculated with MARXAN conservation prioritization considering soil loss. The first result indicates that the area with high soil loss and low species diversity have lower conservation values and thus can be managed as natural disturbances. In the area where soil loss is high and species diversity is also high, it becomes where a disaster mitigation action should be taken for the species. According to the conservation priorities of the second result, higher effectiveness of conservation was obtained with fewer area when it considered SL in addition to SD, compared to when considered only biodiversity. When the SL was not taken into consideration, forest area with high distribution of species were important, but when SL considered, the agricultural area or downstream of the river were represented to be a major part of habitats. If more species data or disaster parameters other than soil loss are added as variables later, it could contribute as a reference material for decision-making to achieve various purposes.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2005.09a
• /
• pp.21-36
• /
• 2005

Although the main geology of Korea consists of granite and gneiss, it Is not uncommon to encounter anisotropy Phenomena in crosshole radar tomography even when the basement is crystalline rock. To solve the anisotropy Problem, we have developed and continuously upgraded an anisotropic inversion algorithm assuming a heterogeneous elliptic anisotropy to reconstruct three kinds of tomograms: tomograms of maximum and minimum velocities, and of the direction of the symmetry axis. In this paper, we discuss the developed algorithm and introduce some case histories on the application of anisotropic radar tomography in Korea. The first two case histories were conducted for the construction of infrastructure, and their main objective was to locate cavities in limestone. The last two were performed In a granite and gneiss area. The anisotropy in the granite area was caused by fine fissures aligned in the same direction, while that in the gneiss and limestone area by the alignment of the constituent minerals. Through these case histories we showed that the anisotropic characteristic itself gives us additional important information for understanding the internal status of basement rock. In particular, the anisotropy ratio defined by the normalized difference between maximum and minimum velocities as well as the direction of maximum velocity are helpful to interpret the borehole radar tomogram.

• Korean Journal of Environmental Agriculture
• /
• v.17 no.3
• /
• pp.260-267
• /
• 1998

This experiment used the enclosed bench-scale reactors of 242 liters was conducted to obtain basic data on temporal and spatial variations in temperature, oxygen and moisture content, which were important factors of biological activities, during composting of mixture of dairy manure and rice straw. The reactors with thermocouples, oxygen sensor and datalogger were aerated at four different rates of 0.09, 0.18, 0.90 and 1.79 l $min^{-1}kg$ dry $solids^{-1}$. The higher aeration rates were, the faster the rates of increase and decrease in composting temperature were in both of initial and turnover stage, and the smaller the temperature difference between exhaust air and composting materials. Composting temperature of initial stage increased suddenly in all aeration rates, then stationary phase of temperature in materials and exhaust air showed at $50{\sim}53^{\circ}C$ for 5 hours and at $45^{\circ}C$ between 5 and 15 hours, respectively. In initial stage the maximum temperature was decreased with increasing aeration rates but in the stage after turnover it was the opposite except for 1.79 l $min^{-1}kg^{-1}$. Time arrived at the maximum temperature of composting materials was later in low-aeration rates than high-aeration rates at both stages. Time maintained high-temperature more than $45^{\circ}C$ was rapidly decreased with increasing aeration rates. In initial stage of composting maintaining time of $65^{\circ}C$ or more was the longest in the treatments of 0.09 and 0.18 l $min^{-1}kg{-1}$, while those of $55{\sim}65^{\circ}C$ and $45{\sim}55^{\circ}C$ was in 0.90 and 1.79 l $min^{-1}kg{-1}$, respectively. The minimum oxygen content and the maximum oxygen consumption rate in exhaust air through composting materials showed the increased trends with increasing aeration rates. In initial stage the minimum oxygen content was ranged from 0.9% to 7.4% for 32 to 59.5 hours and the maximum oxygen consumption rate was $1.89{\sim}6.48$ $gh^{-1}kgVS^{-1}$. In the stage after turnover their levels were $2.1{\sim}19.9%$ and $1.76{\sim}3.49 %$g/h-㎏ VS, respectively, for 16 to 49.5 hours.

• Journal of Korea Water Resources Association
• /
• v.54 no.12
• /
• pp.1243-1254
• /
• 2021

For water resources operation or agricultural water management, it is important to accurately predict evapotranspiration for a long-term future over a seasonal or monthly basis. In this study, reference evapotranspiration forecast (up to 12 months in advance) was performed using statistically predicted monthly temperatures and temperature-based Hamon method for the Han River basin. First, the daily maximum and minimum temperature data for 15 meterological stations in the basin were derived by spatial-temporal downscaling the monthly temperature forecasts. The results of goodness-of-fit test for the downscaled temperature data at each site showed that the percent bias (PBIAS) ranged from 1.3 to 6.9%, the ratio of the root mean square error to the standard deviation of the observations (RSR) ranged from 0.22 to 0.27, the Nash-Sutcliffe efficiency (NSE) ranged from 0.93 to 0.95, and the Pearson correlation coefficient (r) ranged from 0.97 to 0.98 for the monthly average daily maximum temperature. And for the monthly average daily minimum temperature, PBIAS was 7.8 to 44.7%, RSR was 0.21 to 0.25, NSE was 0.94 to 0.96, and r was 0.98 to 0.99. The difference by site was not large, and the downscaled results were similar to the observations. In the results of comparing the forecasted reference evapotranspiration calculated using the downscaled data with the observed values for the entire region, PBIAS was 2.2 to 5.4%, RSR was 0.21 to 0.28, NSE was 0.92 to 0.96, and r was 0.96 to 0.98, indicating a very high fit. Due to the characteristics of the statistical models and uncertainty in the downscaling process, the predicted reference evapotranspiration may slightly deviate from the observed value in some periods when temperatures completely different from the past are observed. However, considering that it is a forecast result for the future period, it will be sufficiently useful as information for the evaluation or operation of water resources in the future.

• Korean Journal of Environmental Agriculture
• /
• v.29 no.3
• /
• pp.227-231
• /
• 2010

Slurry composting biofiltration(SCB) is considered as a treatment to produce a better fertilizer resource than raw pig slurry as it reduces odor and improves nutrients imbalance. For the agricultural use of SCB slurry as a nutrient source with minimum environmental impact, it is important to investigate the effect of different rate of SCB slurry application on nutrient (particularly for nitrogen) uptake and growth of crops. This study was conducted to investigate the influence of fertigation using pig slurry(PS) on growth and yield of red pepper and to evaluate the appropriate PS concentration in fertigation for soils with different nitrate concentration. To evaluate the effects of fertigation applied PS as a substitute of chemical fertilizer(CF), a single application of three different concentrations of PS: $N_{0.5}$ (43 mg/L), $N_{1.0}$ (86 mg/L) and $N_{1.5}$ (131 mg/L) were compared with CF $N_{1.0}$ (89 mg/L) as a control nitrogen fertilizer. Statistical analysis showed that the growths of red pepper were not affected by treatments. In addition, the yields were no significant difference among treatments, though the highest yield was obtained in PS $N_{1.0}$ by 20,580 kg/ha. In soil chemical properties, nitrate nitrogen on soil of between PS N1.0 and CF $N_{1.0}$ treatment showed similar patterns although they were higher than the preplant nitrogen content. Also, there was no significant difference in yield of red pepper between PS and CF treatment applied as fertigation on soils where nitrate nitrogen contents of each soil contains 10, 100 and 200 mg/kg respectively. Consequently, the application of PS, such as SCB, as a substitute of CF is available for growth and yield of red pepper, there could be accordingly estimated the optimal fertigation concentration of PS for red pepper cultivation.