• 한국군사과학기술학회지
• /
• 제21권6호
• /
• pp.826-841
• /
• 2018

The military satellite communication of ROK military, ANASIS is designed for analog data such as voice and streaming data. ANASIS cannot fully support ALL-IP communications due to its long propagation delay. The next generation satellite communication system is being designed to overcome the limitation. Next generation satellite communications system considers both high-speed and low-speed networks to support various operating environment. The low-speed satellite supports both broadband and narrow-band communication. This network works as the infrastructure for of wide-area internetworking over multiple AS's in the terrestrial network. It requires minimum satellite frequency and minimum power and works without PEP and router. In this paper, we propose a network operation structure to enable the inter-operation between high and low-speed satellite networks. In addition, we propose a data link protocol for low speed satellite networks.

• 한국안전학회지
• /
• 제30권5호
• /
• pp.37-43
• /
• 2015

This study examined the effects of the minimum horizontal load on the structural behaviors and safety of system supports. The minimum horizontal load was frequently ignored in the design of system supports even though the level of that load was specified in the code and guide in Korea such as 'Standard Specification in Temporary Construction' and 'Guide to Installation of Shores for a Concrete Bridge'. To examine the effects of considering the minimum horizontal load, the finite element analysis were performed for various system supports. By varying installing parameters of system supports such as the vertical member spacing, the installation height, and the thickness of slab, the maximum combined stress ratios were estimated to investigate the structural safety of system supports. The results showed similar axial stress in vertical members but an increase in bending stress with a consideration of the horizontal load. The combines stress ratios are remarkably increased due to the consideration of the horizontal load. Consequently, the system supports, which were initially estimated to be safe when only the vertical loads were considered, were changed to be unsafe in most cases by the effects of the both the vertical and horizontal stresses. Therefore, the minimum horizontal load following the code and the guide is an essential load that could control the structural safety of system supports.

• 토지주택연구
• /
• 제15권1호
• /
• pp.23-38
• /
• 2024

본 연구는 유형별 공공임대주택의 주거환경을 최저주거기준과 세부 기준을 중심으로 ANOVA, 다항로지스틱모형을 활용하여 미시적으로 살펴보았다. 주요 실증분석의 결과는 다음과 같다. 첫 번째, 입주자뿐만 아니라 최저주거기준과 세부 기준은 공공임대주택 유형별로 특성의 차이를 확인할 수 있었다. 두 번째, 행복주택은 최저주거기준 미달비율과 설비기준을 제외한 나머지 세부 기준의 미달비율이 높아, 전반적인 주거환경이 가장 열악한 것으로 나타났다. 세 번째, 영구임대, 국민임대, 매입/전세임대 중 영구임대의 최저주거기준과 면적·방기준이 취약하였으며, 매입/전세임대는 구조·성능·환경기준의 미달비율이 높게 나타났다. 네 번째, 매입/전세임대가 다른 공공임대 유형보다 임대 불안감이 높았고, 특히 임대료상승과 보증금 미반환에 대한 불안이 높다는 것을 확인하였다. 이러한 결과를 바탕으로 공공임대주택 유형에 따른 맞춤형 지원을 통해 주거환경 개선을 위한 노력이 필요하다는 것을 확인하였다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2004년도 가을 학술발표회 논문집
• /
• pp.437-444
• /
• 2004

In this study, an optimum support design problem is considered to minimize displacement of stacked plates under self weight condition. During the displacement analysis, several kinds of contact arise between the plates themselves and support bar. These can be easily considered if commercial analysis software, which provides capability to solve the contact problem, is used. It is found, however, that the computing time is extraordinarily long due possibly to the generality of the software and also to the ignorance of the control parameters used in the software. In this paper, the contact condition is imposed directly by the authors, while the software is used only to solve the ordinary displacement analysis problem. In this way, the computing time is decreased remarkably by more than 30 times, while yielding the same accurate results. Optimization is conducted based on this efficient analysis method to find minimum number of supporting bars using the response surface algorithm.

• 한국세라믹학회지
• /
• 제29권6호
• /
• pp.496-504
• /
• 1992

Alumina tubes suitable for the support of gas separation membranes have been prepared by the slipcasting technique. These supports have the average pore size of 0.1 ${\mu}{\textrm}{m}$ within the narrow distribution. The sol-gel dipcoating process of nanoparticulate sols is very sensitive to microstructure of the support, and the coating on the inside surface of the tube is found to be more successful than on the outside surface. Nanoparticulate silica sols (0.82 mol/ι) have been synthesized by an interfacial hydrolysis reaction between TEOS and high alkaline water. When coating an alumina tube with these sols, the minimum limits of the particle size and the aging time required for forming the coated gel layer at the given pH are provided. It is optimum to coat the support with less concentrated sols stabilized through aging for the appropriate time (more than 22 days) at the lower pH (pH 2.0) for producing a reproducible crack free thin film coating in composite membranes.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -3
• /
• pp.1855-1858
• /
• 2002

A number of MPLS ATM systems have been proposed to increase the access speed of current routers, which only support the best-effort service. However, the MPLS ATM systems have to support the so-called differential service, which discriminates the applications according to the service class because they do not be satisfied the Internet users who use diverse applications. In this paper, to support this differential service a detailed forwarding procedure based on a LSP control method and an application-based marking algorithm is suggested. The LSP control method establishes several different LSPs for each FEC according to the service class and the application-based marking algorithm chooses a proper differential service depending on the application category. Also, a design scheme of forwarding engine, which can be easily implemented with a minimum modification of existing MPLS ATM systems is proposed. And, the best simulation result of high priority application category is gained when the proposed forwarding algorithm is comparedwithexistingalgorithms.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1997년도 춘계학술대회 논문집
• /
• pp.150-155
• /
• 1997

Rapid Prototyping(RP) is the technique which is used to make prototypes or functional parts directly using the 3-D solid data. Before building the prototype, several processes such as transfering 3D data from CAD system(STL) determination of build-direction, adding support structure and slicing are required. Among the above processes. determination of build-direction is the target of this study. The build direction is determined by many factors according to the objective of the user, like part accuracy, number of support structure, build time, amount of trapped volume, etc, But it is not easy to determine the build-direction because there are many factors and some factors have dependent properties with one another. So, in this study the part accuracy, the number of support structures and build time are considered as the main factor to determine the optimal build-direction. To determine the optimal build-direction for increasing part accuracy, sum of projected area which caused stairstepping effect was considered. The less the projected area is the better part accuracy is About the optimal build-direction to minimize the amount of support structure, sum of projected area of facets that require support structures was considered. About the build time, we considered the minimum height of part we intended. About the build time, we considered the minimun height of part we intended to make.

• 전기전자학회논문지
• /
• 제17권3호
• /
• pp.339-345
• /
• 2013

본 논문에서는 희소한 신호의 압축센싱를 위해 확률적 배제에 기반한 직교정합추구 (PEOMP) 신호 복원 알고리듬을 제안하였다. CoSaMP, gOMP, BAOMP 등의 알고리듬들은 매 반복 단계에서 새로운 atom들을 support set에 추가할 뿐만 아니라 부적절하다고 판단되어지는 atom들은 삭제하기 때문에 우수한 신호 복원 성능을 보인다. 그러나 반복 과정 중에 support set의 구성이 국소 최저점에서 벗어나지 못하여 신호 복원에 실패하는 경우가 발생하는 단점을 가지고 있다. 제안된 알고리듬은 매 반복 단계에서 확률적으로 임의의 atom을 배제하여 support set이 국소 최저점에 빠져 있는 경우 그곳에서 탈출하는데 도움을 준다. 모의실험을 통해 PEOMP가 기존의 OMP 기반의 알고리듬들과 $l_1$ 최적화 방법보다 신호 복원 능력 관점에서 우수한 성능을 보임을 확인하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 춘계 학술논문 발표대회
• /
• pp.109-110
• /
• 2018

Preloading Strut applied during installation of the wall jack, but additionally serves to minimize the displacement of soil pressure acting upon dissolution due to the difficulty. In this study, we developed an index of support for the release of stress to facilitate the dismantling of the strut uninstall. The refractive support the axial force acting on the strut are supportable, is refracted at minimum load, disassembly should be easy. In order to find the optimal shape and structural stability of the refractive support We have performed the numerical analysis and performance test to determine the final model. We carried out model tests and UTM test in order to understand the refractive performance and durability of the refractive support for optimal model. Results of the test UTM is refracted all shot 5 times within a target hit number, it was found that there is no problem of the refractive performance. Further, the results of model experiments, it was found that to ensure sufficient durability more than the performance target value of the pin joint support structure.

• Asian Pacific Journal of Cancer Prevention
• /
• 제16권15호
• /
• pp.6605-6608
• /
• 2015

Background: Colorectal cancer is a major cause of morbidity and mortality throughout the world. Colorectal cancer screening is an optimal way for reducing of morbidity and mortality and a clinical decision support system (CDSS) plays an important role in predicting success of screening processes. DSS is a computer-based information system that improves the delivery of preventive care services. The aim of this article was to detail engineering of information requirements and work flow design of CDSS for a colorectal cancer screening program. Materials and Methods: In the first stage a screening minimum data set was determined. Developed and developing countries were analyzed for identifying this data set. Then information deficiencies and gaps were determined by check list. The second stage was a qualitative survey with a semi-structured interview as the study tool. A total of 15 users and stakeholders' perspectives about workflow of CDSS were studied. Finally workflow of DSS of control program was designed by standard clinical practice guidelines and perspectives. Results: Screening minimum data set of national colorectal cancer screening program was defined in five sections, including colonoscopy data set, surgery, pathology, genetics and pedigree data set. Deficiencies and information gaps were analyzed. Then we designed a work process standard of screening. Finally workflow of DSS and entry stage were determined. Conclusions: A CDSS facilitates complex decision making for screening and has key roles in designing optimal interactions between colonoscopy, pathology and laboratory departments. Also workflow analysis is useful to identify data reconciliation strategies to address documentation gaps. Following recommendations of CDSS should improve quality of colorectal cancer screening.