• 한국주거학회논문집
• /
• 제20권3호
• /
• pp.47-58
• /
• 2009

Providing an adequate housing to the socially underprivileged with a weak economic base is the most difficult task of housing policies. Korea established minimum housing standards and has used them for housing policies. However, the level of Korean minimum housing standards is far lower than that of foreign minimum housing standards. Thus, this study made a comparative analysis of Korean minimum housing standards with foreign housing standards in various aspects in order to guarantee housing quality of the socially underprivileged in Korea. In particular, the floor area and ratio of small lease homes are minutely examined to present the actual housing standard of the socially underprivileged. The level of Korean minimum housing standards suggested in this paper is very close to that of Japanese minimum housing standard, which is 37.95 $m^2$ for a 3 member family and just above Chombard de Lauw's pathological limit (36.03 $m^2$). As this research is specifically focused on the establishment of minimum floor area standards for the socially underprivileged, further research should be made in consideration of more specific requirements of various groups for the socially underprivileged.

• 한국환경과학회지
• /
• 제29권2호
• /
• pp.191-200
• /
• 2020

This study provides a basis for research to establishing air quality standards in Gyeongnam. The trends and deviations in air quality concentrations and short-term environmental standards were analyzed. Furthermore, the regional standards and World Health Organization's (WHO) air quality guidelines (AQGs) were taken into account. The annual average PM₁₀ standard for cities anc counties ate 40 ㎍/㎥ and 30 ㎍/㎥, respectively. SO₂ and NO₂ are achieving national standards and need to be strengthened to the minimum regional standard and WHO AQGs. The PM_2.5 standard, which has not reached national standards, needs to be set at the level of national standards, and is also the target level for 2024 of the Gyeongsangnam and national PM_2.5 management plans.

• 한국실내디자인학회논문집
• /
• 제26권4호
• /
• pp.3-11
• /
• 2017

The appropriate area for human's most basic living space is an important factor. Therefore, the 'minimum housing standard' is a very important factor to ensure a minimum quality of living space for human life. In Korea, however, the importance of the 'minimum housing standard' has been neglected for about 20 years. Even in Korea, the 'minimum housing standard' has become an nominal existence. In other countries, studies have long been conducted on the minimum housing standards, but studies have shown that studies on the minimum housing standard are not actively occurring in Korea. The purpose of this study is to diagnose the current status of the 'minimum housing standard' in Korea and to explore the direction of future research. The study included a total of 29 researches commissioned by the Korea Academic Research Institute (KCI). To ensure the objectivity and reliability of the analysis, analyzed year of research, field of research, method of research, contents of research. Through this study, it is possible to grasp the tendency of previous studies on 'minimum housing standard' in Korea and it is meaningful to increase the usability of 'minimum housing standard' in residential planning. It is also expected that future research on 'minimum housing standards' will be able to present the direction of the field to be developed.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2005년도 동계학술발표대회 논문집
• /
• pp.116-118
• /
• 2005

The ASHRAE first ventilation standard was established in 1973. This standard has been revised regularly, and recently the ventilation standard for residential building was issued separately. Two ASHRAE ventilation standards are introduced in this article.

• 한국IT서비스학회지
• /
• 제7권4호
• /
• pp.151-165
• /
• 2008

This study suggests the organization-level standard(model and process) for quality evaluation of information systems(IS) in non-use organizations despite international standards(ISO/IEC 9126 and ISO/IEC 14598) and national standards(KS X 9126 and KS X 14598) related to quality evaluation of IS. The standard in this study is composed of quality evaluation processes, a quality model, and quality metrics. The weights of the attributes and the sub-attributes in the quality model were calculated by an analytic hierarchy process(AHP). The minimum level and the target level of each metrics were determined by brainstorming of the committee. Furthermore, the case study for the investigation of the applicability and the usability of the suggested organizational standard in the real IS development project was performed. For gaining significant benefits of the standard, both the diffusion and the experience accumulation by its continuous use are needed.

• 무역학회지
• /
• 제48권3호
• /
• pp.107-130
• /
• 2023

본 연구는 선진국의 최소품질표준 설정과 국가 간 상호인정협정의 경제적 효과를 파악하고, 이를 기반으로 우리나라의 최적 상호인정협정 체결 전략을 분석한다. 이를 위하여 3개국의 대표기업이 서로 다른 품질의 제품을 선진국 시장에 공급하는 모형을 설정하였다. 분석결과, 첫째, 선진국 최소품질표준의 상승은 경쟁 상황을 심화시켜 모든 기업의 이윤을 감소시키며 선진국 소비자 효용을 증대시킨다. 또한, 최소품질표준으로 인하여 기업이 시장에서 퇴출된다면 경쟁은 완화되고 남은 기업들의 품질과 이윤은 늘어난다. 둘째, 최소품질표준을 적용을 받게 되는 국가들은 상호인정협정 체결을 통하여 사회후생을 증가 시킬 수 있으며, 서로 다른 국가들 간 상호인정협정 체결의 전략적 활용이 중요하다는 결론을 얻을 수 있다. 특히 우리나라의 경우 선진국과 상호인정협정을 체결하거나 3국 모두 상호인정협정을 체결하지 않는 상황이 최적으로 나타난다.

• 한국생활과학회지
• /
• 제20권3호
• /
• pp.691-711
• /
• 2011

This study examines the preliminary license and approval facilitation standards for improvements in quality for childcare centers focusing on the number of children, building space standards, facilities and equipment, and childcare program. Data from 48 caese was collected from childcare centers nationwide in Korea through a questionnaire and building plan. The first step for starting care licensing is to work out the ages and numbers of children within four or five age ranges. The second step is to work out the number of children as small, medium, or large considering staff to child ratios and building size. The Nnext step is to make a choice about childcare service quality classification as minimum, fair, or good, considering space requirements per child for the building, the classroom and the outdoor playground. The next step is to make a choice of space organization relating to service programs, considering the sleeping and eating area, indoor play area, toilet & washing facilities, classroom layouts such as cluster type, double zone type, single zone type, and others. Also, each room and entrance, office, kitchen, storage, laundry, teacher's area, and chilldren's area, need to be checked for space requirements and performances. The last step is to arrange the childcare program with the building and site plan. In conclusion childcare service quality will get better by upgrading of license regulation especially in minimum space requirements per child, corresponding with an increase in GNP and housing area per person. This is needed for childcare licensing in order to determine the quality level of childcare service.

• 한국인쇄학회지
• /
• 제27권1호
• /
• pp.15-27
• /
• 2009

Since domestic offset print quality control depends on the experience of persons in charge rather than objective data, the standards from the data are needed for the well-organized quality management of high-quality prints. Based on the ISO standards, now the standard specifications, such as GRACoL 7, SWOP 11, SNAP, G7 in America, and EURO Color, ECI, BVDM in Europe, and Japan Color 2001, Japan Color 2004 in Japan, are employed. There exists KS for domestic standards. However, since it has been directly imported from ISO Standards, there are discrepancies in printing materials and media. Although the quality management of commercial prints has been focused and studied. For this circumstance, standards are needed for the production of prints to meet international standards. This paper aims to find out suitable ways to approach domestic printing standards using densitometric method and colorimetric method. Printing experiments on this study were performed with domestic process color inks(Cyan, Magenta, Yellow, Black) and domestic coated papers, under the same conditions as the actual commercial printing processes. In densitometric method, how to set up the optimal solid print density was studied through three tests such as the ways to match solid print density and print contrast to GRACoL standards respectively, and the way to get the highest contrast. In colorimetric method, how to get solid print density with the minimum color difference between the $CIEL^*a^*b^*$ color specification values in GRACoL standards and the measured color specification values in prints, was studied.

• 한국건축시공학회지
• /
• 제11권3호
• /
• pp.265-275
• /
• 2011

건설 산업에서 BIM의 도입과 활용이 증가하면서 BIM모델의 작성과 관리, 납품, 품질검토 등에 대한 요구가 늘어나고 있다. 이를 위해서는 BIM과 관련된 각종 지침이나 기준, 매뉴얼, 가이드라인 등의 개발과 보급, 확산 등이 필요한 상황이다. 또한 BIM을 활용한 발주가 증가함에 따라 BIM모델에 대한 품질의 검증과 평가의 정량화에 대한 요구가 증대되고 있다, 이에 본 논문에서는 BIM의 품질에 대한 정의와 특징을 이해하고 BIM기준에 대한 국내외 현황을 파악하였으며, 특히 BIM의 품질과 관련된 내용을 중점적으로 조사, 분석함으로써 향후 BIM의 품질을 관리하는데 필요한 최소한의 기준을 설정하였다.

• Transactions on Electrical and Electronic Materials
• /
• 제2권1호
• /
• pp.22-26
• /
• 2001

ITO (Indium-tin-oxide) thin films were deposited on glass substrates by a dc magnetron sputtering system using ITO powder target. The methods of heat treatment are important factor to obtain high quality ITO films with low electrical resistivity and good optical transmittance. Therefore, both methods of the substrate temperature and post-deposition annealing temperature have been compared on the film structural, electrical and optical properties. A preferred orientations shifts from (411) to (222) peak at annealing temperature of 200$\^{C}$. Minimum resistivity of ITO film is approximately 8.7$\times$10$\^$-4/ Ωcm at substrate temperature of 450$\^{C}$. Optical transmittances at post annealing temperature above 200$\^{C}$ are 90%. As a result, the minimum value of annealing temperature that is required for the recrystallization of as-deposited ITo thin films is 200$\^{C}$.