• 대한전자공학회논문지SP
• /
• 제45권4호
• /
• pp.100-106
• /
• 2008

본 논문에서는 다양한 잡음 환경에서 음성의 통계적 모델에 기반한 음성 검출기의 성능향상을 위해 PSFM (Power Spectral Flatness Measure)을 이용하여 실시간으로 변별적 가중치 학습 (Discriminative Weight Training) 기반의 최적화된 우도비 테스트 (Likelihood Ratio Test, LRT)를 제안한다. 먼저, 기존의 통계모델기반의 음성 검출기를 분석하고, 이를 기반으로 MCE (Minimum Classification Error)방법을 도입하여 도출한 각 주파수 채널별 가중치를 PSFM 값에 기반하여 실시간 매 프레임마다 다른 가중치를 적용한 우도비 기반의 음성 검출 결정법을 제시한다. 제안된 알고리즘은 다양한 잡음 환경에서 기존에 제시된 음성 검출기와 비교하였으며, 우수한 성능을 보인다.

• 한국인터넷방송통신학회논문지
• /
• 제11권1호
• /
• pp.29-34
• /
• 2011

본 논문에서는 자동 원격검침을 위한 전력선 통신에서의 등화기 기법인 zero-forcing (ZF)와 minimum mean square error (MMSE) 기법을 제안하고 분석하였다. 전력선 통신을 이용한 효율적인 AMR 시스템 구현을 위해서 임펄스 노이즈와 다중경로 채널의 영향들은 완화되어야 한다. 이러한 영향들을 극복하기 위해, 앞서 말한 등화기 기법들을 사용하였다. 시스템 성능은 비트오류율 (BER)에 의해서 평가되어진다. 모의실험 결과로부터 등화기가 전력선 통신 시스템의 BER 성능을 현저하게 향상시키고 MMSE가 ZF보다 더 나은 성능을 제공함을 확인하였다. 본 논문의 실험 결과는 AMR 시스템뿐만 아니라, 다양한 스마트 그리드 서비스에도 적용될 수 있다.

• 한국위성정보통신학회논문지
• /
• 제9권4호
• /
• pp.47-52
• /
• 2014

최근에 WPT(Wireless Power Transmission)기술을 이용하여 모바일기기에 무선으로 전력을 공급하는 무선충전기술의 관심이 급증하고 있다. 이와 관련하여 한정된 주파수 자원을 효율적으로 운용하기 위한 무선기기 간 간섭 영향 분석이 요구된다. 본 논문에서는 간섭 영향을 분석하기 위해 최소결합손실(Minimum Coupling Loss)방법과 몬테카를로(Monte Carlo)방법을 제안하였다. 제안한 방법으로 휴대폰 무선충전기의 3차 하모닉스를 고려한 인접대역의 무선 모뎀과의 간섭 영향을 분석하여 휴대폰 무선충전기로부터 무선 모뎀을 보호하기 위한 보호이격거리와 무선 모뎀의 반경에 따른 허용 간섭원 수를 도출하였다.

• 전력전자학회논문지
• /
• 제26권2호
• /
• pp.120-126
• /
• 2021

DC-link capacitors are one of the main components in two-level three-phase voltage source inverters (VSIs); they provide the pulsating input current and stabilize the vacillating DC-link voltage. Ideally, the larger the capacitance of DC-link capacitors, the better the DC-link voltage stabilizes. However, high capacitance increases the cost and decreases the power density of VSI systems. Therefore, the capacitance should be chosen carefully on the basis of the DC-link voltage ripple requirement. However, the DC-link voltage ripple is dependent on the pulse-width modulation (PWM) strategy. This study especially presents a DC-link voltage ripple analysis when the minimum loss discontinuous PWM strategy is applied. Furthermore, an equation for the selection of the minimum capacitance of DC-link capacitors is proposed. Experimental results with R-L loads are also provided to verify the effectiveness of the presented analysis.

• 한국군사과학기술학회지
• /
• 제25권2호
• /
• pp.169-176
• /
• 2022

Laser ablation propulsion(LAP) is the method to create impulse by laser ablation. It can be used to deorbit the space debris(SD), as its long-range property and versatility on any material. In this paper, we find out several requirements of the LAP system(LAPS) to deorbit the SD by simple numerical calculations of the SD orbit and laser beam flux. As a result, minimum operable altitude angle turned out to be a crucial variable to the LAPS. Moreover, if minimum operable altitude angle is 10°, and if the minimum distance between the LAPS and the SD is below 450 km, 1 m/s² is sufficient to deorbit the SD by once. With 18 kJ/3 ns pulsed laser and cube shaped 100 kg SD, 1 m/s² acceleration can be achieved by increasing the pulse repetition rate over 34~53 Hz, depending on the size of the SD. This capability could compare with the conceptual design of the Japan Establishment for a Power-laser Community Harvest(J-EPoCH) facility, which include 8 kJ, 5 PW@100 Hz laser.

• Journal of Power Electronics
• /
• 제14권1호
• /
• pp.92-104
• /
• 2014

To insure stable operation and eliminate twice torque ripple, a topology for a six phase permanent magnet synchronous generator (SP-PMSG) with a neutral point connected together was analyzed in this paper. By adopting an extended transformation matrix, the mathematic model of the space vector control was established. The voltage and torque equations were deduced while considering the third harmonic flux and inductance. In addition, the suppression third harmonic method and the closed loop control strategy were proposed. A comparison analysis indicates that the cooper loss minimum method and the current magnitude minimum method can meet different application requirements. The voltage compensation amount for each of the methods was deduced which also takes into account the third harmonic effect. A simulation and experimental result comparison validates the consistency through theoretical derivation. It can be seen that all of the two control strategies can meet the requirements of post-fault.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1997년도 춘계학술대회
• /
• pp.108-110
• /
• 1997

In MRI, gradient coils are needed for spatial selection and position coding to obtain the position information of the NMR signal. In this paper, a new design scheme for actively-shielded x, y-gradient coils, namely, a minimum-power and/or minimum-inductance design scheme using current-loop elements, has been proposed. Its utility in designing MRI gradient coils has been shown by using simulation. An actively-shielded x-gradient coil has been designed as an example and the results are presented. The design scheme seems to be useful for actively-shielded transverse gradient coils, even of non-cylindrical or of arbitrarily -selected shapes.

• 한국유체기계학회 논문집
• /
• 제8권6호
• /
• pp.15-25
• /
• 2005

Check valves playa vital role in the operation and protection of nuclear power plants. Check valves failure in nuclear power plants often lead to a plant transient or trip. The analysis of historical failure data gives information on the populations of various types of check valves, the systems they are installed in, failure modes, effects, methods of detection, and the mechanisms of the failures. A majority of check valve failures are caused by improper application. The experimental apparatus is designed and installed to measure the disc positions with flow velocity, Vopen and Vmin for 3 inch and 6 inch swing check valves. The minimum flow velocity necessary to just open the disc at a full open position is referred to as Vopen, and Vmin is defined as the minimum velocity to fully open the disc and hold it without motion. In the experiments, Vmin is determined as the minimum flow velocity at which the back stop load begins to increase after the disc is fully opened or the oscillation level of disc is reduced below $1^{\circ}$. The results show that the Vmin velocities for 3 inch and 6 inch swing check valves are about 27.3% and 17.5% higher than the Vopen velocities, respectively.

• Journal of Mechanical Science and Technology
• /
• 제14권7호
• /
• pp.737-743
• /
• 2000

This paper presents the effects of circumferential groove on the minimum oil film thickness in engine bearings. The fluid film pressures are calculated by using the infinitely short bearing theory for the convenience of analysis. Journal locus analysis is performed by using the mobility method. A comparison of minimum oil film thickness of grooved and ungrooved bearing is presented. It is found that circumferential $360^{\circ}$ groove only reduces the absolute magnitude of the oil film thickness, but $180^{\circ}$ half groove affects the shape of film thickness curve and position of minimum oil film thickness.

• 한국정밀공학회지
• /
• 제18권10호
• /
• pp.116-126
• /
• 2001

This paper suggests a numerical method to find optimal geometric path and minimum-time motion for a spatial 6-link manipulator arm (PUMA 560 type). To find a minimum-time motion, the optimal geometric paths minimizing 2 different dynamic performance indices are searched first, and the minimum-time motions are searched on these optimal paths. In the algorithm to find optimal geometric paths, the objective functions (performance indices) are selected to minimize joint velocities, actuator forces or the combinations of them as well as to avoid one static obstacle. In the minimum-time algorithm the traveling time is expressed by the power series including 21 terms. The coefficients of the series are obtained using nonlinear programming to minimize the total traveling time subject to the constraints of velocity-dependent actuator forces.