• Transactions of The Korea Fluid Power Systems Society
• /
• v.5 no.1
• /
• pp.13-19
• /
• 2008

The typical hydraulic system of hoist is composed of a hydraulic supply unit, a directional control valve, counter balance valve, and flow control valves. The flow capacity coefficients of flow control valves should be adjusted so that the hoist is operated at moderate speed and the hydraulic energy loss is minimized. However, it is difficult to adjust the flow coefficients of flow control valves by trial and error for optimal operation. Here, the steady state model of the hoist hydraulic system including the differential cylinder circuit is derived and the optimal flow capacity coefficients of flow control valves are obtained using the complex method that is one kind of constrained direct search method.

• International Journal of Aeronautical and Space Sciences
• /
• v.2 no.1
• /
• pp.44-54
• /
• 2001

This paper describes the antenna alignment method of the tracking antenna system for LEO satellite. The purpose of the antenna alignment is to reduce the angular error due to the structural alignment and the monopulse null point alignment error. The angular error of 3 axis tracking system is the key performance parameter that should be minimized to accurately track satellite movement. The angular error is analyzed via a simulation and boresight measurement. The simulation is done with formulas to be derived from vector concept for 3-axis movement. The formulas of the structural alignment are verified by comparing the formula result with the field measurement. Also, the angular error due to monopulse null shift is obtained via boresight measurement. Based on the analyzed and measured results, the antenna alignment was performed and was verified via tracking test of operating LEO satellite.

• Journal of Sensor Science and Technology
• /
• v.16 no.6
• /
• pp.467-474
• /
• 2007

The real-time monitoring about the activity of the human provides useful information about the activity quantity and ability. The present study implemented a small-size and low-power acceleration monitoring system for convenient monitoring of activity quantity and recognition of emergent situations such as falling during daily life. For the wireless transmission of acceleration sensor signal, we developed a wireless transmission system based on a wireless sensor network. In addition, we developed a program for storing and monitoring wirelessly transmitted signals on PC in real-time. The performance of the implemented system was evaluated by assessing the output characteristic of the system according to the change of posture, and parameters and acontext recognition algorithm were developed in order to monitor activity volume during daily life and to recognize emergent situations such as falling. In particular, recognition error in the sudden change of acceleration was minimized by the application of a falling correction algorithm

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.6 no.2
• /
• pp.29-38
• /
• 2010

It often occur to nature disaster that like earthquake, typhoon, etc. around KOREA. A Haiti and Chile also metropolitan area of KOREA occur earthquake. in result, People think of nature disaster. Structures of present age are easily affected by nature disaster. So we are important that warn of dangerous situation as soon as possible. On this study, I introduce Integrated monitoring system that administrator check a event as early. I develop Monitoring System using SMS(Short Message Service). Administrator always monitor structure on real-time using mobile web-page. As Administrator using mobile device like PDA, Administrator always monitor structure. As using this system, Damage of nature disaster is minimized and is prevented post damage.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.5
• /
• pp.723-730
• /
• 2000

In this paper, we perform a performance analysis of serial acquisition scheme using AWGN rejection filter in Rayleigh fading channel and propose robust acquisition scheme using Reference filter, which is utilized to vary threshold at fading rate, in Rayleigh fading channel. AWGN rejection filter is utilized to evaluate running average for compensating channel gain. The JAKE model, which a channel model, is used for the analysis. The simulation result shows that the mean acquisition time of the proposed acquisition system is minimized than acquisition system using AWGN rejection filter and serial-search acquisition system.

• Journal of Korean Institute of Industrial Engineers
• /
• v.19 no.4
• /
• pp.97-104
• /
• 1993

This paper deals with the design problem of a man-on-board(MOB) storage and retrieval warehousing system which is suitable for storing items of small size and light weight. It is assumed that the operator carries out a sequence of retrieving(or storing) operations traveling on a specially designed truck. Considering the operating characteristics of the man-on-board system, an optimal design model is developed in which the investment and maintenance costs of the system are minimized over a time horizon satisfying a set of constructional restrictions. The model is formulated as a nonlinear integer program and a search algorithm is proposed to find an optimum solution.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.50 no.9
• /
• pp.411-416
• /
• 2001

Distance relay is the most widely used in transmission line protection because it is applicable not only as main protection but also as back-up protection. However, the protection range of the distance relay is always fixed in the unchangeable operating range while the power system varies, and therefore the distance relay is the device that is the highly influenced by the power system changes. In this regard, this paper describes an approach to minimize the mal-operation of the distance relay due to the power system changes through changing protection range of the distance relay into optimal condition in response to the load variation and power system condition. Also mal-function of the distance repay in case of high resistance ground faults could be minimized through modeling the protection range into quadratic function.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1998.06a
• /
• pp.83-94
• /
• 1998

An analysis system for sheet metal forming has been developed to improve the design and tryout process by predicting the deformation behaviour more precisely. This analysis system consists of forming analysis, springback analysis and post processor modules. The more accurate prediction of stress history can be achived due to the improved contact algorithm. Successive simulation of several processes can be carried out conveniently without interrupt by the improved data management of the developed system. The error of data transfer between forming analysis and springback analysis is minimized using the proper shell element. Several benchmark test results and practical results are presented to show the effectiveness and reliability of this program.

• Transactions of the Korean hydrogen and new energy society
• /
• v.33 no.4
• /
• pp.451-461
• /
• 2022

CFD analysis including optimization process was conducted to design shell and tube CO₂ methanation reactor cooling system. The high-pressure saturated water flowed into the cooling system and was evaporated by heat flux from reacting tubes. The optimization process decided the gap between tubes and reactor diameter to satisfy objective functions related to temperature. The results showed that the gap and diameter reduced about 30% and 3.6% respectively. Averaged surface temperature satisfied the target value and the min-max deviation was minimized.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.617-620
• /
• 1997

We have built a robot soccer system to participate in MIROSOT97. This paper represents hardware specification of our system and our strategy. We select a centralized on-line system for a soccer game. The paper explains hardware specifications of our system for later development. Also, the paper explains our strategy from two viewpoints. From the viewpoint of cooperation, some heuristic ideas are implemented. From the viewpoint of path plan, Cubic spline is used with cost function which minimized time, radius of curvature for smoothness, and obstacle potential field. Direct comparison will be realized in MIROSOT97.