• 전기의세계
• /
• 제28권6호
• /
• pp.61-77
• /
• 1979

This paper is concerned with minimization process of the binary logic function. This paper describes an algorithm called the SIMPLE TABLE METHOD that well suited to minimization a switching function of any number of variables. For the Simple Table construction, a theorem based upon the numerical properties of the logic function is derived from the relationships governing minterms of the given function. Finally the minimal sum of products can be obtained in terms of the Direct Method or the Indirect Method from the table and table characteristics derived from the Simple Table. The properties and table characteristics used in this paper are described. All the minterms of a switching function are manipulated only by decimal numbers, not binary numbers. Some examples are used as a vehicle to guide the readers who are familiar with the Karnaugh map and Quine-McCluskey tabular method to this New method. These examples not only treat how to handle Don't Care miterms but also show the multiple output functions.

• Journal of Microbiology and Biotechnology
• /
• 제22권10호
• /
• pp.1336-1342
• /
• 2012

In Burkholderia pseudomallei, the pathogen that causes melioidosis, the gene cluster encoding the capsular polysaccharide, is located on chromosome 1. Among the 19 capsular genes in this cluster, wzm has not been thoroughly studied. To study the function of wzm, we generated a deletion mutant and compared it with the wild-type strain. The mutant produced less biofilm in minimal media and was more sensitive to desiccation and oxidative stress compared with the wild-type strain, indicating that wzm is involved in biofilm formation and membrane integrity. Scanning electron microscopy showed that the bacterial cells of the mutant strain have more defined surfaces with indentations, whereas cells of the wild-type strain do not.

• 한국수학교육학회지시리즈A:수학교육
• /
• 제48권3호
• /
• pp.287-302
• /
• 2009

This study investigated how 5th grade students found and understood triangle congruence conditions (SSS, SAS, ASA). In particular, this study focused on children's processes of discovering triangle congruence conditions and the obstacles which they encountered in the process of making sense of these conditions. Our data indicates that inquiring the cases in which less than three factors of triangle are given is helpful for children to guess triangle congruence conditions and understand the minimal characteristic of these conditions. And the degree of difficulty of discovering each congruence condition is different. Children discovered SAS condition and ASA condition easily, but it was hard for them to discover and understand that SSS was also a triangle congruence condition because they connected the length of a given side with the use of a scaled ruler not a compass.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제11권2호
• /
• pp.125-127
• /
• 2005

In order to improve the transformation efficiency of the Bacillus thuringiensis (Bt)-Escherichia coli (E. coli) shuttle vector, pHT3101, we intended to minimize replication origin of Bt in pHT3101. For this, two modified shuttle vectors, pHT1K and pHT261, in which 2.9 kb of replication origin of Bt were shortened to 1 kb and 261 bp, respectively as previously reported. Whereas the pHT1K could efficiently transform Bt into the antibiotic resistant, no transformants were obtained with pHT261. Furthermore, pHT1K showed higher transformation efficiency compared to that of parent vector, pHT3101. Therefore, pHT1K might be a very useful Bt-E. coli shuttle vector carrying minimal replication origin of Bt.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2009년도 춘계학술발표대회 논문집
• /
• pp.102-108
• /
• 2009

Fossil power plants firing lower grade coals or equipped with modified system for NOx controls are challenged with maintaining good combustion conditions while maximizing generation and minimizing emissions. In many cases significant derate, availability losses and increase in unburned carbon levels can be attributed to poor combustion conditions as a result of poorly controlled local fuel and air distribution within the boiler furnace. In order to develop a on-line combustion tuning system, field test was conducted at operating power boiler. During the field test the exhaust gases' $O_2$, NOx and CO was monitored by using a spatially distributed monitoring grid located in the boiler's high temperature vestibule and upper convective back-pass region. At these locations, the flue gas flow is still significantly stratified, and air in-leakage is minimal which enables tracing of poor combustion zones to specific burners and over-fire air ports. using these monitored information we can improving combustion at every point within the furnace, therefore the boiler can operate at reduced excess $O_2$ and gas temperature deviation, reduced furnace exit gas temperature levels while also reducing localized hot spots, corrosive gas conditions, slag or clinker formation and UBC. Benefits include improving efficiency, reducing NOx emissions, increasing output and maximizing availability. Discussion concerning the reduction of greenhouse gases is prevalent in the world. When taking a practical approach to addressing this problem, the best way and short-term solution to reduce greenhouse gases on coal-fired power plants is to improve efficiency. From this point of view the real time optimized combustion tuning approach is the most effective and implemented with minimal cost.

• 한국태양에너지학회 논문집
• /
• 제29권5호
• /
• pp.45-52
• /
• 2009

Fossil power plants firing lower grade coals or equipped with modified system for $NO_x$ controls are challenged with maintaining good combustion conditions while maximizing generation and minimizing emissions. In many cases significant derate, availability losses and increase in unburned carbon levels can be attributed to poor combustion conditions as a result of poorly controlled local fuel and air distribution within the boiler furnace. In order to develop a on-line combustion tuning system, field test was conducted at operating power boiler. During the field test the exhaust gases' $O_2,\;NO_x$ and CO was monitored by using a spatially distributed monitoring grid located in the boiler's high temperature vestibule and upper convective rear pass region. At these locations, the flue gas flow is still significantly stratified, and air in-leakage is minimal which enables tracing of poor combustion zones to specific burners and over-fire air ports. using these monitored information we can improving combustion at every point within the furnace, therefore the boiler can operate at reduced excess $O_2$ and gas temperature deviation, reduced furnace exit gas temperature levels while also reducing localized hot spots, corrosive gas conditions, slag or clinker formation and UBC. Benefits include improving efficiency, reducing $NO_x$ emissions, increasing output and maximizing availability. Discussion concerning the reduction of greenhouse gases is prevalent in the world. When taking a practical approach to addressing this problem, the best way and short-term solution to reduce greenhouse gases on coal-fired power plants is to improve efficiency. From this point of view the real time optimized combustion tuning approach is the most effective and implemented with minimal cost.

• 한국정밀공학회지
• /
• 제15권8호
• /
• pp.46-59
• /
• 1998

This paper presents shape design, surface construction, and cutting path generation for the surface of marine ship propeller blades. A propeller blade should be designed to satisfy performance constraints that include operational speed which impacts rotations per minutes, stresses related to deliverable horst power, and the major length of the marine ship which impacts the blade size and shape characteristics. Primary decision variables that affect efficiency in the design of a marine ship propeller blade are the blade diameter and the expanded area ratio. The blade design resulting from these performance constraints typically consists of sculptured surfaces requiring four or five axis contoured machining. In this approach a standard blade geometry description consisting of blade sections with offset nominal points recorded in an offset table is used. From this table the composite Bezier surface geometry of the blade is created. The control vertices of the Hazier surface patches are determined using a chord length fitting procedure from tile offset table data. Cutter contact points and path intervals are calculated to minimize travel distance and production time while maintaining a cusp height within tolerance limits. Long path intervals typically generate short tool paths at the expense of increased however cusp height. Likewise, a minimal tool path results in a shorter production time. Cutting errors including gouging and under-cut, which are common errors in machining sculptured surfaces, are also identified for both convex and concave surfaces. Propeller blade geometry is conducive to gouging. The result is a minimal error free cutting path for machining propeller blades for marine ships.

• Animal cells and systems
• /
• 제2권2호
• /
• pp.249-258
• /
• 1998

Obesity, one of the most common metabolic diseases in industrial countries is characterized by an increase in the number or size of adipocytes. In an effort to create transgenic mouse models for the study of obesity we developed a novel technique in which adipose tissue can be ablated genetically at will, at any specific developmental stage and/or physiological condition, by the treatment of ganciclovir. We made a series of adipocytespecific expression vectors using minimal regulatory regions of brown adipocyte-specific uncoupling protein (UCP-1) gene and adipocyte-specific aP2 gene, and then analyzed their expression characteristics in cultured cell lines. When both constructs pUCP-LacZ and paP2-LacZ were transfected transiently into differentiating 3T3-L1 (pre-while adipocytes) and HIB-1B (pre-brown adipocytes) cell lines in vitro and then monitored by X-gal staining of cells, these regulatory regions were sufficient to show proper differentiation stage-specific expression in adipocvtes. To confirm that adipocytes expressing HSV-TK controlled by these minimal requlatory elements are sufficient to kill themselves with ganciclovir treatment pUCP-TK and paP2-TK expression constructs were transfected stably into HIB-1B and 3T3-L1 cells, respectively, and their ganciclovir sensitivities were tested during in vitro differentiation of cells. As expected more than 80% of cells were dead by the 7th day of treatment with ganciclovir while negative control cells were not affected at all. The data suqqest that the constructed vectors are suitable for obtaining novel obese transqenic models based on a conditional genetic tissue ablation method.

• 한국콘텐츠학회논문지
• /
• 제16권10호
• /
• pp.588-597
• /
• 2016

고용노동부에서 매년 조사하는 산업재해현황분석 보고서에 따르면 국내에서 발생하는 산업재해 중 건설산업이 차지하는 비율은 2010년 24.09%에서 2014년 27.56%로서 꾸준히 증가하고 있는 추세이다. 최근에는 구조물의 고층화 및 건설 공사의 대형화로 인해 건설장비의 사용이 매년 늘어나고 있으며, 이로 인한 재해 역시 증가하고 있다. 국내에서 발생하고 있는 건설장비에 의한 재해는 주로 트럭, 굴삭기 등의 중장비가 큰 비중을 차지하고 있으며, 운전자가 주변의 작업자를 인지하지 못하여 발생하는 충돌 및 협착에 의한 사고가 많이 발생하고 있다. 본 논문에서는 이러한 건설 장비에 의한 사고 중 많은 부분을 차지하고 있는 굴삭기에 의한 사고를 방지하기 위하여 영상기반 굴삭기 접근 감지 시스템을 개발하였다. 영상기반 굴삭기 접근 감지 시스템은 카메라와 초음파센서로 구성된 접근 감지 센서 모듈과 접근 감지 센서 모듈에서 전송되는 정보를 확인할 수 있는 AVM(Around view monitor)으로 구성되어 있다. 본 시스템은 별도의 기반인프라(서버, 통신망 등)가 필요하지 않기 때문에 소규모 건설 현장에도 적용이 가능하며, 다양한 건설장비에도 활용이 가능하다.

• 한국건설관리학회논문집
• /
• 제17권6호
• /
• pp.24-30
• /
• 2016

BIM은 사업차여자간 협업을 요구하는 동시에 3차원 형상 정보와 더불어 개별 사업정보의 공유를 필요로 한다. 이에 따라 BIM 정보에 대한 소유 및 사용권한에 대한 지식재산권, 즉, 저작권 보호에 대한 체계적인 수립을 요한다. 현재 국내 표준계약서는 BIM 정보에 대한 보호를 담기엔 한계가 있다. 본 연구에서는 미국 및 영국의 주요 BIM 표준계약서를 분석하여 이를 토대로 국내 실정에 맞는 법률적 조항과 운용 방식을 추려내었다. 그 결과 소유권은 저작자; 사용권은 라이선스 서브라이선 방식으로 부여, 취소권한을 주되 사업차질에 최소화하는 선에서 제공, 그리고 데이터오류에 대한 책임 역시 최소화함을 명시할 것을 제안한다. 또한 통합 빔 모델은 연합모델로 구축하고 사업진행중 모델 책임자 및 상세수즌을 사전적으로 합의할 수 있는 책임 메트릭스를 제공할 것을 권유한다.