• 한국전자파학회논문지
• /
• 제13권9호
• /
• pp.956-963
• /
• 2002

본 논문에서는 SIR(Stepped Impedance Resonator) 구조를 이용한 compact한 slit-folded형 마이크로스트립패치 안테나를 제작하였다 기존의 길이 방향의 $\lambda_{g}/2$ 공진을 이용한 평면형 마이크로스트립패치 안테나를 길이방향 중심에서 반으로 접어서 마이크로스트립 급전선으로 급전하여 전방향성 방사패턴을 얻은 Folded형 마이크로스트립 안테나를 적층형으로 제작시 급전선의 영향을 줄이기 위하여 급전방법을 상하면 패치사이의 접지면 위에 설계하여 급전핀을 세웠다. 또한 평면형 H형 SIR 구조를 Folded형 안테나에 적용한 슬릿 folded형 안테나는 기존의 folded형 안테나에 비하여 27.5 % 더 소형화하였다. 기존의 folded형 마이크로스트립 안테나는 E면(zx-plane)과 H면(xy-plane)의 평균이득이 거의 1.8 dB 정도의 차이를 보였으나 본 논문에서 제안한 슬릿 folded형은 E & H-plane의 평균이득차이가 0.1 dB로 거의 같음을 알 수 있다.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.1125-1125
• /
• 2001

Micro-scale test methods are producing small-sample size where the conventional physical and chemical tests can not be used (high standard deviation, uncertain sampling conditions, low repeatability). Different small-scale test methods were developed recently for determination of physico-chemical, functional, rheological properties of wheat or wheat dough using miniaturized instruments with sophisticated sample preparation/handling and mechanics (RVA, 2 g mixograph, micro-Z-arm mixer, small-scale noodle maker, micro-baking method etc.). The small-scale methodologies can be used as basic research tools or as technology supported measurements and can be also essential in the early selection for quality traits in breeding programs. The milling as a sample preparation step is essential procedure providing good quality flour or semolina samples from small amount of grain (5-10 g) in a reproducible and reliable way. The aim of present study was to use NIR as quality control tool, and to evaluate the recently developed and manufactured micro-scale lab mill (FQC-2000) produced by Inter-Labor Co. Ltd., Hungary. The milling characteristics of the new instrument were compared to other laboratory mills and the effects of milling action on the chemical composition of fractions were analysed. The fractions were tested with both chemical and near infrared spectroscopic methods. The micro-scale milling resulted significantly different yields, particle size distributions and different fractions from compositional point of view. The near infrared spectra were sensitive enough to distinguish the fractions obtained by different milling procedures. Quantitative NIR calibration equations were developed and tested in order to measure the chemical composition of characteristic milling fractions. Special qualification procedure the PQS (Polar Qualification System) method was used for detecting the differences between fractions obtained by macro and micro-milling procedures. The results and the limitations of PQS method in this application will be discussed.

• 한국실내디자인학회논문집
• /
• 제20권1호
• /
• pp.199-207
• /
• 2011

After the development of printing technology since the 15th century and the rise of citizen consciousness in the 18th century, the library has taken a public concept. And after the 20th century, its role as a public library for the public was stressed, and as its spatial composition became miniaturized and specialized, its function changed from stacking and reading to various kinds including culture and service and is getting more complex beside the function of a library. Thereupon, this study aims to figure out the limitations of public libraries' opening years shown in advanced researches and understand the current status of spatial composition by complexation with the subjects of five public libraries opened after the end of December, 2006 in order to examine their tendencies of complexation and the characteristics of spatial composition by the complexation of public libraries. As a result, the present public libraries have at leaser more than two spaces with complex functions. According to the result of analysis on the types, locational relations between spaces showed the mixed type the most. In the types of building allocation, the building integrated type had a higher percentage than the separated type. About the types of entrance, the one common door type was fewer than the two separate door type. In the analysis on the types of the interior line of flow, the common type was similar to the dispersed type, and it is thought to be resulted from spatial composition rather than the preplanned line of flow.

• 한국전자파학회논문지
• /
• 제29권1호
• /
• pp.1-9
• /
• 2018

본 논문에서는 건물 내 무선 통신환경 개선을 위한 필름형 이중 대역 주파수 선택 구조를 제안하였다. 제안한 주파수 선택 구조는 간단한 설계 변수를 통해 2.4 GHz와 5 GHz 이중 대역의 공진 주파수를 제어할 수 있는 소형화된 구조로 얇은 투명 필름 위에 스크린 프린팅 방식을 사용하여 설계 및 제작하였으며, 측정을 통해 성능을 확인하였다. 건물 내에 전파환경 성능 분석이 가능한 소프트웨어를 사용하여 설계한 FSS 구조를 건물에 적용했을 때 실외로부터 유입되는 불요신호에 대한 감쇠 성능을 분석하였다. 또한 분석 결과를 검증하기 위하여 실제 건물 내벽에 제작한 FSS 필름을 적용하여 실내 환경의 신호강도를 측정하였다. 측정결과 제작된 이중 대역 주파수 선택 구조는 실제 건축물에 적용할 경우 2.4 GHz와 5 GHz 대역에서 각각 29.4 dB, 15.94 dB의 감쇠 성능을 가짐을 확인하였다.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2007년도 학술대회
• /
• pp.427-431
• /
• 2007

Applications in present-day mobile communication systems particularly require miniaturized dimensions and low-profiles of antenna in order to meet the mobile units. Thus, size reductions and bandwidth enhancements are becoming crucial design considerations for practical applications of microstrip antennas. The motivation of further experiments have been stepped to follow those studies for achieving compact and broadband, even multiplied operation modes, which are greatly increased with much attentions recently. To obtain broadband, single-feed, circularly polarized characteristics of microstrip antennas, a design with feed-line ought to be a factor of two. Usually, diagonally balanced-line feeds with hybrid coupler are employed to attain circular polarizations. We firstly formulated DGS (Defected Ground Structures) based operation principles of the entire microstrip components and therefore were able to derive impedance variance of feed-lines. After verifying corresponding experimental results, we targeted the frequency bands of UHF RFID (Ultra High Frequency Radio Frequency IDentification) and approximately of 0.4-2.4GHz have exhibited remarkable two resonance amplitudes as a dual band antenna. Our secondary researches were aimed to design quad band microstrip antenna which represents four resonance characteristics within the identical frequency bands as well. Microstrip patch has been meandered to lengthen the electrical paths, and the other design criteria with respecting physical parameters including radiation patterns and impedance bandwidths measurements will be described for verification. Advisable applications of these antennas can be GSM850, GSM900, GPS (L1-1575 and L2-1227) and UMTS-2110 of cellular systems, which extremely desire multiband and minimum size.

• 한국정보통신학회논문지
• /
• 제17권9호
• /
• pp.1996-2002
• /
• 2013

본 논문에서는 코플래너 도파관으로 급전되는 소형 광대역 평면 모노폴 안테나의 설계방법에 대해 연구하였다. 제안된 구조의 광대역 모노폴을 지상파 디지털방송 수신용으로 최적화 설계하였다. 모노폴과 접지면을 광대역 특성을 갖도록 완만한 테이퍼 구조로 하였다. 모노폴과 접지면에 슬릿을 장하하여 안테나를 소형화하였다. 광대역 모노폴은 특성 임피던스 75옴의 코플래너 도파관으로 급전되고 $100mm{\times}200mm$ 크기의 FR4 기판에 설계하였다. 디지털 방송 주파수 대역인 470-806 MHz 대역에서 동작하도록 설계된 안테나를 FR4 기판 상에 제작 후 실험을 통하여 연구결과의 타당성을 검증하였다.

• Journal of Electrical Engineering and Technology
• /
• 제8권6호
• /
• pp.1320-1327
• /
• 2013

In this paper, two different electromagnetic energy harvesters using bulk micromachined silicon spiral springs and Polydimethylsiloxane (PDMS) packaging technique have been fabricated, characterized, and compared to generate electrical energy from ultra-low ambient vibrations under 0.3g. The proposed energy harvesters were comprised of a highly miniaturized Neodymium Iron Boron (NdFeB) magnet, silicon spiral spring, multi-turned copper coil, and PDMS housing in order to improve the electrical output powers and reduce their sizes/volumes. When an external vibration moves directly the magnet mounted as a seismic mass at the center of the spiral spring, the mechanical energy of the moving mass is transformed to electrical energy through the 183 turns of solenoid copper coils. The silicon spiral springs were applied to generate high electrical output power by maximizing the deflection of the movable mass at the low level vibrations. The fabricated energy harvesters using these two different spiral springs exhibited the resonant frequencies of 36Hz and 63Hz and the optimal load resistances of $99{\Omega}$ and $55{\Omega}$, respectively. In particular, the energy harvester using the spiral spring with two links exhibited much better linearity characteristics than the one with four links. It generated $29.02{\mu}W$ of output power and 107.3mV of load voltage at the vibration acceleration of 0.3g. It also exhibited power density and normalized power density of $48.37{\mu}W{\cdot}cm-3$ and $537.41{\mu}W{\cdot}cm-3{\cdot}g-2$, respectively. The total volume of the fabricated energy harvesters was $1cm{\times}1cm{\times}0.6cm$ (height).

• 대한기계학회논문집A
• /
• 제35권1호
• /
• pp.53-58
• /
• 2011

초정밀 소형공작기계는 초정밀가공분야에서 마이크로/메조 스케일 가공품의 정밀제조기술의 핵심으로 개발되어 왔다. 소형초정밀기계의 기하학적 오차는 가공품의 품질에 큰 영향을 미치기 때문에 반드시 분석 및 보정되어야 한다. 기존 소형공작기계의 기하학적 오차는 주로 레이저 간섭계로 측정되었으나 한번의 설치로 모든 기하학적 오차를 측정할 수 없고 까다로운 절차를 따라야 한다. 그 대안으로써 PSD 로 구성된 측정시스템이 개발되었으나 측정가능거리가 PSD 의 유효영역에 한정되었다. 본 논문에서는 측정가능거리를 확장시키고 설치오차를 최소화하여 6-자유도 기하학적 오차를 측정하는 시스템을 제안하고 민감도 해석과 실험을 통하여 이 측정 시스템의 정확도를 증명하였다.

• 대한의용생체공학회:의공학회지
• /
• 제38권4호
• /
• pp.168-174
• /
• 2017

To improve and downsize the KIOM-Pulse Analysis System(KIOM-PAS), which has been traditionally used in clinical trials, a miniaturized PAS(M-PAS) with a pneumatic pump has been developed. M-PAS is composed of a measurement module and an arm-mounting module, on which an arm can be placed. The measurement module is equipped with a pressing component and sensor, which is a wearable wristband. The arm-mounting module includes a pneumatic motor, data acquisition board and valves. In addition, the measurement module is divided into a fixing module of band type for attachment to a pulsation site and a sensing module, which includes a sensor and a tube. The fixing module and sensing module are constructed independently, and the detachable fastening method improves the posture convenience of the subject during measurement. M-PAS has been reduced to 1/6 the size of KIOM-PAS, and the measurement time is shortened by 22%. Using a simulator, the difference between the waveforms measured by the two devices exhibited a high degree of similarity of within 3.65%. M-PAS represents improvements in size and convenience compared with KIOM-PAS, and it is expected to be widely used in clinics in the future because it improves the attachment method of the fixing module.

• 한국항공우주학회지
• /
• 제45권8호
• /
• pp.686-696
• /
• 2017

본 연구에서는 3U 큐브위성의 표준 플랫폼을 기반으로 한누리 5호 위성을 개발하고 이를 검증하였다. 표준 플랫폼의 기계시스템 설계에서는 초소형 부품 및 서브시스템 기능/성능을 초소형 PCB에 집적 및 소형화하도록 하고, 다양한 탑재체를 수용하도록 전기적 능력을 극대화한다. 한누리 5호는 지구저궤도(LEO)에서 운용하는 3U 크기의 큐브위성으로 적외선 카메라를 이용한 지구관측임무와 가이거뮬러 튜브로 우주방사선 측정을 하는 과학임무를 수행한다. 또한, 자체 개발한 소형 가변속제어모멘트자이로(VSCMG)와 퍼지로직 기반의 MPPT (Maximum Power Point Tracking) 등의 부품(장치)들에 대한 기술검증도 포함한다. 한누리 5호의 검증을 위해 한누리 5호 위성체계의 ETB 시험, 기능시험 및 인증(Qualification)과 인수(Acceptance) 수준의 환경시험을 수행하였고 이들 시험결과를 제시하였다.