Miniaturization of Parallel Coupled-Line Filter using Lumped Capacitors and Grounding

집중 소자 캐패시터와 접지를 이용한 평행 결합 선로 필터의 소형화 연구

  • 명성식 (연세대학교 전기전자공학과) ;
  • 육종관 (연세대학교 전기전자공학과)
  • Published : 2004.09.01

Abstract

This paper proposes new miniaturization method of parallel coupled line filter by using capacitors and grounding. Proposed method can reduce resonator size by using only a small number of capacitor and grounding of parallel coupled line filter which is conventional in field of RF filters because of its design and fabrication simplicity. This paper applies the miniaturization method of transmission line and parallel coupled line to parallel coupled line filter, and presents that grounding can reduce the number of shut capacitors. Presented miniaturized method has merits of miniaturization of parallel coupled line, harmonic suppression, and improvement of high frequency skirt with harmonic suppression. For verification of proposed method, this paper presents a hairpin filter, which has 900 MHz center frequency and 10 % FBW, miniaturized to λ/4 by proposed method.

본 논문은 집중 소자 캐패시터와 접지를 사용하여 평행 결합 선로 필터의 새로운 소형화 기법을 제안하였다. 본 논문에서 제안한 기법은 설계와 제작이 간단하여 RF(Radio Frequency) 필터로 많이 사용되고 있는 평형 결합선로 필터를 소수의 캐패시터와 접지만을 이용하여 필터의 크기를 임의의 길이로 줄일 수 있는 기법이다. 본 논문은 기존의 단일 전송 선로와 평행 결합 선로의 소형화 기법을 평행 결합 선로 필터에 적용하였으며, 접지를 이용해 소형화에 사용될 캐패시터의 개수를 줄이는 기법을 제안한다. 본 논문에서 제안한 기법은 필터의 소형화와 더불어 집중소자 캐패시터를 사용함으로 인해 필터의 고조파 특성이 개선되며 이로 인해 고주파 영역의 차단 특성이 개선되는 장점이 있다. 제안된 소형화 기법에 대한 검증을 위해 Duroid($\varepsilon$$_{r}$=10)기판을 사용하여 셀룰러폰 대역인 900 MHz 대역의 FBW(Fractional Band Width) 10 %의 필터를, 제안한 기법을 적용하여 공진기의 길이를 λ/4로 줄인 헤어핀 형태로 제작 및 측정하여 제안된 기법의 타당성을 확인하였다..

Keywords

References

  1. J. -S. Hong, M. J. Lancaster, 'A novel microwave periodic structure-The ladder microstrip line', Microwave and OpticaI Technology Letters, vol. 9, pp. 207-210, Jul. 1995 https://doi.org/10.1002/mop.4650090413
  2. J. -S. Hong, M. J. Lancaster, 'Investigation of Microstrip pseudo-interdigital bandpass filters using a full-wave electromagnetic simulator', Int. J. Micro-wave and Millimeter-Wave Computer-Aided Engineering, vol. 7, pp. 231-240, May 1997 https://doi.org/10.1002/(SICI)1522-6301(199705)7:3<231::AID-MMCE4>3.0.CO;2-R
  3. E. G. Cristal, S. Frankel, 'Design of hairpin-line and hybrid hairpin-parallel-coupled-line filters', IEEE MTT-S, Digest, pp. 12-13, 1971
  4. G. L. Matthaei, 'Comb-line band-pass filters of narrow or moderate bandwidth', The Microwave Journal, vol. 6, pp. 82-91, Aug. 1963
  5. Inder Bahl, Prakash Bhartia, Microwave Solid State Circuit Design, John Wiley & Sons, Inc., Hokoken, New Jersey, Second Edition, 2003
  6. Yong-Tae Kim, Young-Ju Kim, Sun-Hyeong Kim, and Jun-Seok Park, 'Design and implementation of lumped/distributed-elements direction coupler for NMT 450 SYSTEM', 2003 Asia-Pacific Microwave Conference proceedings, vol. 1, pp. 498-501, 2003
  7. E. M. T. Jones, J. T. Bolljahn, 'Coupled-strip- transmission-line filters and directional coupler', IRE Trans., PGMIT-4, vol. 2, pp. 75-81, Apr. 1956