• 환경위생공학
• /
• 제13권3호
• /
• pp.121-127
• /
• 1998

This study investigated exposures to oil mist obtained from an cutting oil manufacture shop and 5 machining shops and also analysis of some oils. The results were that geometric average concentrations of oil mist were $0.29 mg/m^3$, which was less than current $TLV(5mg/m^3$) in Korea. The proper case of either type of system will ensure that atmospheric concentrations of oil mist in machine shops will be within the TLV. It should be remembered, however, that this TLV was established before there was any suggestion that in the inhalable of oil mist might rarely be carcinogenic, and so it seems prudent to keep atmospheric content as low as possible. The analysis of insoluble cutting oils with GC-MSD showed that considerable suspected PAHs were contained. But soluble cutting oil(KSM-W2) didn't almost contain PAHs.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2003년도 somma/kms meeting
• /
• pp.172-172
• /
• 2003

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
• /
• pp.339-340
• /
• 2002

Natural castor oil was chemically reconstructed to extend the carbon chains by means of iso-reaction so as to improve the rheological behavior, by way of increasing the viscosity index and decreasing the pour point. The rheological and tribological characteristics of the reconstructed castor oil were comparatively investigated with those of the natural castor oil and several other vegetable oils and a mineral oil. The friction and wear test results on a four-ball machine indicate that the chemically reconstructed castor oil has considerably improved rheological and tribological properties as compared with the natural castor oil. It shows a greatly increase viscosity index and largely decreased pour point, which makes it applicable to low temperature lubrication. The chemically reconstructed castor oil even shows better tribological behavior than pentaerythritol ester or di-iso-capryl sebacate. However, it is still needed to increase the oxidation stability of the reconstructed castor oil.

• Tribology and Lubricants
• /
• 제19권5호
• /
• pp.280-284
• /
• 2003

High performance characteristics are required for rolling bearings and the various functions of bearing are greatly influenced by grease. Recently, higher performance is being demanded of rolling bearing greases for bearing lubrication. Four special greases with different composition such as lithium soap/ester oil, urea/ester oil, urea/ether oil and PTFE/fluorine oil were synthesized to compare the performance of these greases with that of the conventional lithium soap/mineral oil grease. The grease properties were investigated using a series of typical grease testing methods and grease life test. After the life test, the greases were charaterized by FTIR analysis and a microscope. And the iron amount in the greases was analyzed by AAS after ashing. The composition and manufacturing process determined the grease performance. The grease with a base oil of synthetic oil showed higher performance and the urea/ester oil and PTFE/fluorine oil showed about three times longer life as compared with conventional lithium grease.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2001년도 제34회 추계학술대회 개최
• /
• pp.179-185
• /
• 2001

High performance characteristics are required for rolling bearings and the various functions of bearing are greatly influenced by grease. Recently, higher performance is being demanded of rolling bearing greases for bearing lubrication. Four special greases with different composition such as lithium soap/ester oil, urea/ester oil, urea/ether oil and PTFE/fluorine oil were synthesized to compare the performance of these greases with that of the conventional lithium soap/mineral oil grease. The grease properties were investigated using a series of typical grease testing methods and grease life test. After the life test, the greases were charaterized by FTIR analysis and a microscope. And the iron amount in the greases was analyzed by AAS after ashing. The composition and manufacturing process determined the grease performance. The grease with a base oil of synthetic oil showed higher performance and the urea/ester oil and PTFE/fluorine oil showed about three times longer life as compared with conventional lithium grease.

• Tribology and Lubricants
• /
• 제26권3호
• /
• pp.167-174
• /
• 2010

An apparatus for measuring oil oxidation was developed, which is capable of being mounted to mechanical devices for detecting power of fluorescent light reflected from oil in real time as an indication of the oil oxidation. This device has an advantage over conventional fluorescence spectrometers where the thin film is required for the measurement. Clean and used oil samples (mineral and synthetic oils) were tested by the developed apparatus that calculates a fluorescence quantum yield and a light absorption coefficient of the oil based upon the signals from the two light-receiving members and evaluates the degree of oil oxidation of test oils based on the fluorescence quantum yield. Results generally show that the developed device is able to effectively evaluate oil oxidation characteristics on-site in the field.

• 한국석유지질학회지
• /
• 제12권1호
• /
• pp.1-8
• /
• 2006

중국 산동반도에는 백악기 육상 퇴적분지인 교래분지가 발달하고 있으며, 여러 지역의 노두에서 다양한 형태의 유징이 나타난다. 교래분지는 전기 백악기와 후기 백악기에 걸쳐 발달한 인리형 분지로 하호성 퇴적물과 화산암으로 구성된다. 교래분지의 퇴적층은 3개의 층으로 구분되는데 하부로부터 래양층 (萊陽層), 청산층 (靑山層), 왕씨층(王氏層)이다. 전기 백악기에 속하는 래양층은 적색과 비적색 하호성 퇴적물로 구성되며 역암, 사암, 셰일을 포함한다. 청산층 역시 전기 백악기에 속하는데 여러 종류의 화산암으로 구성된다. 후기 백악기에 속하는 왕씨층은 적색의 역암, 사암, 셰일 등으로 구성된다. 아스팔트, 기름 냄새, 스며 나온 기름통의 다양한 형태의 유징이 여러 지역의 노두에서 관찰되지만 유전은 발견되지 않았다. 3개의 지층 중에서 비교적 풍부한 유기물을 포함하는 지층은 래양층이다. 래양층의 일부 흑색 혹은 회색 세일의 유기물 함량은 1% 이상이며, 타이프 I 혹은 타이프 II의 특성을 가지는 유기물 기원의 케로젠을 포함하는 층준들이 있다. 열적 성숙도는 주 석유 생성단계에 도달하였고, 석유생성 잠재력도 비교적 높아 래양층의 흑색 세일은 석유 근원암으로 유망하다.

• 한국유기농업학회지
• /
• 제23권2호
• /
• pp.373-390
• /
• 2015

This study investigated the effect of coated feed using mixed oil on rumen fermentation characteristics. Two experiments were conducted based on materials that were mixed. First, cashew nut and soybean oils were mixed with white mineral oil. And second, different plant extracts were mixed with white mineral oil. At first experiment, inclusion levels of mixed oil on diet (0.03%, 0.1%, 0.5%) were applied as variables. A coated diet was fermented with rumen inoculum according to in vitro rumen fermentation and its parameters were investigated. In the result of first experiment, no negative effects on rumen pH were found. Significantly decreased dry matter digestibility was detected at 0.5% treatment (P<0.05). Total gas productions in control and 0.03% were significantly greater than those of others (P<0.05). Significantly reduced methane productions were found in all treatments compared to the control (P<0.05). Inclusion of mixed oil did not affect on ammonia production. Total volatile fatty acid production was also not influenced by coating with mixed oils. Rumen fermentation parameters were greatly changed according to introduced plant extracts at second experiment. The significantly lowest and greatest ammonia productions were found at treatments with Ixeris dentata and Plantago asiatica, respectively (P<0.05). The significantly greatest acetate and propionate productions were detected at treatments with Crucuma longa and Zizyphus vulgaris 1, respectively (P<0.05). All treatments, except Chrysanthemum idicum, Euyale ferox seed, Moringa leaf and fruit and Zizyphus vulgaris 1, showed significantly increased total volatile fatty acid production compared to the control (P<0.05). Only Paeonia lactiflora showed significantly lesser gas production than the control (P<0.05). In methane production, Ceramium, Zizyphus, Paeonia, Agrimonia, Torilis, Mugwort, Foeniculum, Euphorbia, Taraxacum, Artemisia, Momordica, Curcuma and Moringa reduced methane significantly compared to the control (P<0.05).

• 자원리싸이클링
• /
• 제18권1호
• /
• pp.22-29
• /
• 2009

중유회를 효율적으로 소각 처리할 수 있는 이동상식 스토카로를 설계, 제작하기 위해 중유회가 노상을 이동하면서 겪는 조건들을 회분식 노에서 모사(模寫)하여 열중량분석법으로 중유회의 소각실험을 수행하였다. 이 결과로부터 이동상식 스토카로의 운전조건 및 노상면적 등을 구하였다. 중유회의 연소과정은 연소속도 차이에 의해 3단계로 구별되며, 각 단계별로 효과적인 연소가 이루어질 수 있도록 해야 한다. 비산방지 및 체적감소를 위하여 소각 전 첨가되는 수분 함량은 20 wt.%가 적절하였다. 중유회의 연소속도는 산소농도에 크게 의존하므로, 소각로는 연소공기의 조절 기능이 필요하다. 저융점 금속화합물의 용착 및 증발을 방지하고, 소각잔사의 불용화 및 유가금속 회수를 위해 소각온도는 $750^{\circ}C{\sim}800^{\circ}C$가 적절하고, 중유회의 균일한 연소반응과 연소속도의 향상을 위해 소각 중 중유회의 교반이 요구된다. 최적 조건에서 단위면적당 소각속도는 $12.53kg/m^{2}hr$이며 1일 18 ton의 중유회를 소각처리하기 위해서는 $60m^2$의 노상면적이 필요하다.

• Korean Chemical Engineering Research
• /
• 제54권5호
• /
• pp.606-611
• /
• 2016

Carbon dioxide injection is a widely known method of enhanced oil recovery (EOR). It is critical for the $CO_2$ EOR that the injected $CO_2$ to reach a condition fully miscible with oil. To reach the miscible point, a certain level of pressure is required, which is known as minimum miscibility pressure (MMP). In this study, a MMP prediction method using a process simulator is proposed. To validate the results of the simulation, those are compared to a slim tube experiment and several empirical correlations of previous literatures. Aspen HYSYS is utilized as the process simulator to create a model of $CO_2$/crude oil encounter. The results of the study show that the process simulator model is capable of predicting MMP and comparable to other published methods.