• 자원리싸이클링
• /
• 제31권2호
• /
• pp.63-69
• /
• 2022

본 연구에서는 국내에 의치한 관인광산의 바나듐 함유 티탄철광(vanadium titanium magnetite, VTM) 광석 대상으로 기계적 분쇄에 의한 결정구조를 평가하고자 다양한 조건에서의 유성 볼밀을 통한 기계적 분쇄를 수행하였으며, 산물에 대하여 결정구조 거동을 평가하였다. 사용된 관인광산 VTM 광석은 자철석과 티탄철석이 주요 광종이며, 주요 맥석광종은 철기반 실리케이트로 확인되었다. 유성 볼밀에 의한 기계적 활성화 결과에 따르면 분쇄메디아(볼) 크기는 크기가 작을수록 결정화도 및 결정크기가 감소하였으며, 시료/볼 충전은 시료가 투입이 적을수록 무정형화가 크게 일어남을 확인되었다. 게다가, 분쇄운전 변수인 분쇄속도 및 시간은 증가할수록 결정구조의 변화가 크게 관찰되었으며, 볼 크기 및 시료/볼 충전비보다도 분쇄속도 및 시간에 의한 결정구조 거동의 영향을 크게 주는 것으로 확인되었다.

• 한국세라믹학회지
• /
• 제41권12호
• /
• pp.889-892
• /
• 2004

Acicular type aragonite precipitated calcium carbonate was synthesized by carbonation reaction of $Ca(OH)_2$ slurry and $CO_2$ gas. As increasing the initial concentration of $Mg^{2+}$ ion, calcite crystal phase substantially decreased while that of aragonite crystal phase increased. According to XRD and EDS analysis, it was found that the addition of $MgCl_2$ induced the $Mg^{2+}$ ion to substitute in $Ca^{2+}$ ion site of calcite lattice then the unstabled calcite structure be resolved, consequently the growth of calcite structure is interrupted while the growth of aragonite structure is expedited.

• Korean Chemical Engineering Research
• /
• 제55권3호
• /
• pp.279-286
• /
• 2017

This review paper evaluates different kinds of synthesis methods for calcite precipitated calcium carbonates by using different materials. The various processing routes of calcite with different compositions are reported and the possible optimum conditions required to synthesize a desired particle sizes of calcite are predicted. This paper mainly focuses on that the calcite morphology and size of the particles by carbonation process using loop reactors. In this regard, we have investigated various parameters such as $CO_2$ flow rate, Ca $(OH)_2$ concentration, temperature, pH effect, reaction time and loop reactor mechanism with orifice diameter. The research results illustrate the formation of well-defined and pure calcite crystals with controlled crystal growth and particle size, without additives or organic solvents. The crystal growth and particle size can be controlled, and smaller sizes are obtained by decreasing the Ca $(OH)_2$ concentration and increasing the $CO_2$ flow rate at lower temperatures with suitable pH. The crystal structure of obtained calcite was characterized by using X-ray diffraction method and the morphology by scanning electron microscope (SEM). The result of x-ray diffraction recognized that the calcite phase of calcium carbonate was the dominating crystalline structure.

• 한국식품영양과학회지
• /
• 제27권3호
• /
• pp.413-418
• /
• 1998

There are several types of salts that classifed into raw salts(Chunil salt, Saeng salt), purified salts (NaCl reagent grade, Hanju salt) and processed salts(Gueun salt, Saeng kum, Bamboo salt) in Korea. Their major element is NaCl but raw salt from sea water contains other minerals such as K, Mg and S. Mineral contents of the various kinds of salt analyzed with ICP-AES and AAS were different, especially on the contents of K, Mg and Ca. Chunil salt was abundant in Ca(1,037ppm), K(3,707ppm), Mg(10,266ppm) and S(7,459ppm), and salt water from the Chunil salt contained small amounts of Pb, Al, Cr and Hg. Processed salts contained high levels of Ca, K, Mg and Fe. Especially, high levels of K, P, Fe and Ge were detected in bamboo salt. Purified salts showed regular crystal form and raw salts exhibited irregular crystal form under the SEM. The processed salts were not crystal form, but fused and irregular round form.

• 한국재료학회지
• /
• 제12권5호
• /
• pp.334-340
• /
• 2002

$TiO_2$-coated fly ash was synthesized by dropping method of coating agent in order to get $TiO_2$ coating layer with high photocatalytic activity on the surface of coal fly ash. The properties of the $TiO_2$ coating layer such as morphology, crystal structure, crystal size and photocatalytic activity were compared with those of the $TiO_2$-coated fly ash prepared by the traditional method of precipitation. $TiCl_4$ aqueous solution was used as a titanium stock solution and $NH_4HCO_3$ was used as a precipitant. The $TiO_2$ coating layer obtained by dropping method of coating agent was more uniform than that coated by precipitation. However, the crystal of $TiO_2$ coated by dropping method of coating agent was easy to grow by heat treatment because of the small primary particle size and bulky morphology, and its photocatalytic activity was consequently lower than that of the $TiO_2$ coated by precipitation. The $TiO_2$ coating layer obtained by both methods had a crystal structure of anatase, and the temperature of phase transformation into rutile was 90$0^{\circ}C$. The minimum crystal size of $TiO_2$ for the highest photocatalytic activity was found to be about 10nm.

• 한국재료학회지
• /
• 제13권5호
• /
• pp.285-291
• /
• 2003

The nanosized silver and gold particles are prepared by ERC method in which metal vapors with high temperature is rapidly quenched by coolants such as liquid nitrogen or liquid argon. In order to monitor the crystal structural changes on the internal and the surface of the nanosized noble metal particles, lattice parameter, internal strain and Debye-Waller factor are investigated, and the calculation of X-ray diffraction scattering intensity is performed. The lattice parameters of silver and gold particles agree with those of bulk materials, and crystal internal strain of the metal particles is not changed by rapid cooling. The Debye-Waller factor of gold particles is increased with decreasing particle size because of the surface softening phenomenon of nanosized particles, but the crystal structural change on the surface of the particles is not detected from the comparison the calculated X-ray diffraction profile with the experimental profile on gold particles with the particle size of 4 nm.

• 헤리티지:역사와 과학
• /
• 제45권4호
• /
• pp.114-125
• /
• 2012

본 연구에서는 풍납토성 동성벽 내부토양을 대상으로 색도색차계, XRD, 입도분석기 등을 이용하여 색도, 입도, 주요화학조성, 광물결정구조 등을 분석하였다. 성벽토양은 황갈색, 회황색의 모래 또는 실트질 모래(SW~SC)로 분류되고, 입도와 화학 광물학적 특성이 유사하며, 도로나 활주로 등의 성토재료로 적합한 특성임이 확인되었다. 색도, 입도, 화학조성, 강열감량의 4인자를 기준으로 비교분석한 결과, 풍납토성이 위치한 지역의 대조군 토양(PNS)은 성벽축조에 사용되지 않았던 것으로 판단한다. 모든 토양은 풍납토성이 위치한 지역과 지질학적으로 유사한 곳에서 채굴되었던 것으로 추정되지만, 성벽 축조 이전에 분포했던 구지표면의 토양과는 다른 특성을 나타내기 때문에, 유적 주변에 대량채굴이 가능했던 토양분포지가 존재할 것으로 추정된다. 향후 성벽 축조재료의 여러 특성들을 비교 분석하면, 성벽 내부토양의 산지, 축조방법, 보수방법 및 시기 등을 보다 종합적으로 이해할 수 있는 계기가 마련될 것으로 기대한다.

• 자원리싸이클링
• /
• 제26권6호
• /
• pp.10-19
• /
• 2017

국내 석탄화력발전소의 습식배연탈황공정에서 탈황용 흡수제로 사용하는 국내산 고품위석회석의 결정구조가 분쇄특성 및 용해특성에 미치는 영향을 연구하였다. 광물학적 결정구조가 다른 제천-단양 지역 석회석 4종을 대상으로 결정구조, 분쇄일지수 및 용해도를 비교한 결과 석회석의 결정크기와 구조에 따라 분쇄일지수 차이가 발생하였으며 분쇄일지수가 상대적으로 낮은 석회석의 용해도가 높은 것으로 나타났다. 이에 따라 석회석의 CaO 함량과 함께 결정구조에 따른 분쇄특성도 중요한 반응인자로 확인되었다.

• 한국재료학회지
• /
• 제13권10호
• /
• pp.691-696
• /
• 2003

To improve the photocatalyticactivity of $TiO_2$-coated coal fly ash, tungsten hydroxide was doped by impregnation method and was oxidized by heat treatment in temperature ranges of $WO^{\circ}C$ for 2 hrs. The changes of crystal structure and crystal size of $TiO_2$and $WO_3$on coal fly ash were investigated by X-ray diffraction analysis. The crystal structure of titanium dioxide showed only anatase type and $TiO_2$-$WO_3$ compounds appeared in the heat treatment temperature ranges of $500∼600^{\circ}C$. By adding $V_3$in $TiO_2$coated on fly ash, the growth of crystal size of anatase was restrained and the anatase phase was stabilized in temperature ranges of TEX>$500∼<800^{\circ}C$. And $WO_3$acted as a trap site of electrons excited from anatase by irradiating UV. The maximum removal efficiency of NO gas for $TiO_2$/$WO_3$-coated coal fly ash was 84% and appeared when the ammonium tungstate of $1.3${\times}$10^{-3}$ M was doped and then heated at $600^{\circ}C$ for 2 hrs.

• Bulletin of the Korean Chemical Society
• /
• 제29권10호
• /
• pp.1969-1972
• /
• 2008

In this study, horse spleen apoferritins were induced to form biominerals using up to 3000 Fe atoms per protein molecule. The morphology and crystallinity of the nanometer-sized biominerals formed in the ferritins were then analyzed using field emission-energy filtering-transmission electron microscopy (FE-TEM). The ferritins were found to have reconstitution yields of 60-70% in the experiments. The mean core size of the ferritins varied somewhat with protein concentrations, indicating that crystal growth in ferritins could be controlled via protein concentrations. The core mineral size increased with the amount of Fe used. Lattice fringes of the core, associated with good crystallinity, were found in all samples. The lattice fringe images of a single domain ferrihydrite mineral appeared frequently in the (011) planes (d-spacing of 0.246 nm) under [100] zone axis in all samples of this study. In addition, the lattice image occasionally revealed fringes corresponding to the (100) planes (d = 0.254 nm) from the [001] zone axis, indicating the characteristic pattern of hexagonal crystal lattice. Diffraction patterns in the minerals identified as ferrihydrite were fitted well into the space group of $P3_{1c}$.