• Journal of Korean Society for Atmospheric Environment
• /
• v.33 no.2
• /
• pp.97-107
• /
• 2017

Columnar aerosol properties retrieved from solar radiation were investigated at the Yongin (YGN) SKYNET site over seven years from October 2008 to October 2015. Hourly averages were calculated when the data were available, and back trajectories were calculated to examine the effects of regional transport. Data recovery rate was low at 6.6%, primarily because solar radiation was measured only under daytime clear-sky conditions. Mean values of the fine-mode volume fraction (FMVF) as well as its seasonal variation were similar to those of $PM_{2.5}/PM_{10}$ although the coarse-mode fraction of column aerosols tended to be slightly larger. The values of single scattering albedo (SSA) and FMVF were lower in spring due to the effects of mineral dust, and higher in summer due to secondarily-formed inorganic ions. Back trajectories were grouped into five clusters according to the directions of transport paths. Aerosol loading was highest for Cluster 2 from the northwest, but SSA and FMVF were not particularly high or low because aerosols were composed of various materials with different properties. Aerosol loading was lowest for Cluster 5 from the Pacific Ocean passing through the south end of Japan, whose SSA and FMVF were highest as secondarily-formed inorganic ions were mixed.

• Geophysics and Geophysical Exploration
• /
• v.26 no.2
• /
• pp.52-61
• /
• 2023

The use of ultra-high-resolution (UHR) seismic surveys to preceisly characterize coastal and shallow structures have increased recently. UHR surveys derive a spatial resolution of 3.125 m using a high-frequency source (80 Hz to 1 kHz). A digital streamer system is an essential module for acquiring high-quality UHR seismic data. Localization studies have focused on reducing purchase costs and decreasing maintenance periods. Basic performance verification and application tests of the developed streamer have been successfully carried out; however, a comparative analysis with the existing benchmark model was not conducted. In this study, we characterized data obtained by using a developed streamer and a benchmark model simultaneously. Tamhae 2 and auxiliary equipment of the Korea Institute of Geoscience and Mineral Resources were used to acquire 2D seismic data, which were analyzed from different perspectives. The data obtained using the developed streamer differed in sensitivity from that obtained using benchmark model by frequency band.However, both type of data had a very high level of similarity in the range corresponding to the central frequency band of the seismic source. However, in the low frequency band below 60 Hz, data obtained using the developed streamer showed a lower signal-to-noise ratio than that obtained using the benchmark model.This lower ratio can hinder the quality in data acquisition using low-frequency sound sources such as cluster air guns. Three causes for this difference were, and streamers developed in future will attempt to reflect on these improvements.

• 한국석유지질학회:학술대회논문집
• /
• spring
• /
• pp.10-14
• /
• 1998

A systematic methodology is developed for the electrofacies determination from wireline log data using multivariate statistical analysis. To consider corresponding contribution of each log and reduce the computational dimension, multivariate logs are transformed into a single variable through principal components analysis. Resultant principal components logs are segmented using the statistical zonation method to enhance the efficiency and quality of the interpreted results. Hierarchical cluster analysis is then used to group the segments into electrofacies. Optimal number of groups is determined on the basis of the ratio of within-group variance to total variance and core data. This technique is applied to the wells in the Korea Continental Shelf. The results of field application demonstrate that the prediction of lithology based on the electrofacies classification matches well to the core and the cutting data with high reliability This methodology for electrofacies classification can be used to define the reservoir characteristics which are helpful to the reservoir management.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.05a
• /
• pp.490-493
• /
• 2004

In the analysis of early-age concrete behavior, the fresh concrete is considered as a structural element immediately after mixing. But for the activation of real structural behavior in the fresh concrete, the so-called setting time is necessary a few hours after the beginning of hydration reaction. In this paper, analysis on the setting behavior is carried out by proposing an analytical model based on the percolation theory as well as the expanding cluster model by defining the setting as a microstructure formation in fresh concrete. An experimental investigation is also carried out to show the influences of curing temperature, mineral admixtures and chemical admixture on setting behavior of fresh concrete. Finally, the analytical results using proposed model are compared with the experimental results for the sake of verification.

• The Journal of Engineering Geology
• /
• v.25 no.1
• /
• pp.67-81
• /
• 2015

A FORTRAN program was developed to determine the optimal locations of multiple recharge wells in an aquifer with different arrangements of pumping wells. The simulated annealing algorithm was used to find optimal locations of two recharge wells which satisfied three objective functions. The model results show that locating two injection wells inside the cluster of pumping wells is efficient if the recovery rate only was taken into account. In contrast, placing injection wells to the side of the cluster is desirable if the simulation considers aggregate objective function. Therefore, installing an injection well on each side of the cluster seems to yield the maximum recovery rates for the existing pumping wells, and it yields similar increases in pumping rate for all wells in the cluster. The locations of recharge wells can be arranged in numerous configurations, because there are multiple near-optimal local minima or maxima. These results indicate that the simulated annealing can yield effective evaluations of the optimal locations of multiple recharge wells. In addition, the suggested aggregate objective function can be utilized as an appropriate multi-objective optimization.

• Korean Journal of Materials Research
• /
• v.12 no.11
• /
• pp.860-864
• /
• 2002

$Li^{+}$ extraction reactions with ion-exchange type lithium manganese oxide in an aqueous phase were examined using chemical and x-ray diffraction (XRD) analysis. In the process of extraction reaction, the lithium manganese oxide showed a topotactic extraction of $Li^{+ }$ in the aqueous phase mainly through an ion-exchange mechanism, and the $Li^{+}$ extracted samples indicated a high selectivity and a large capacity for $Li^{+}$ . The electronic structures and chemical bonding properties were also studied using a discrete variational (DV)-X$\alpha$ molecular orbital method with cluster model of (Li$Mn_{12}$ $O_{40}$ )$^{27-}$ for tetrahedral sites and ($Li_{7}$ Mn $O_{38}$ )$^{3}$ for octahedral site in $Li_{1.33}$ $Mn_{1.67}$ / $O_{4}$ respectively. Li in the manganese oxides is highly ionized in both sites, but the net charge of Li was greater for tetrahedral sites than octahedral. These calculations suggest that the tetrahedral sites have higher $Li^{+}$ $H^{+}$ exchangeability than the octahedral sites, and are preferable for the selective adsorption for L $i^{+}$ ions.s.

• Asian Journal of Atmospheric Environment
• /
• v.11 no.2
• /
• pp.122-130
• /
• 2017

The main purpose of the study was to clarify the properties of individual particles collected at each behavior space of a factory worker. The samplings of size-segregated ($PM_{2.1-1.1}$ and $PM_{4.7-3.3}$) indoor particles were conducted at three different behavior spaces of a factory worker who is engaged in an auto parts manufacturing plant (i.e., his home, his work place in factory, and his favorite restaurant). Elemental specification (i.e., relative elemental content and distribution in and/or on individual particles) was performed by a micro-PIXE system. Every element detected from the coarse particulate matters of home was classified into three groups, i.e., a group of high net-counts (Na, Al, and Si), a group of intermediate net-counts (Mg, S, Cl, K, and Ca), and a group of minor trace elements (P, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, and Pb). The results of EF for $PM_{4.7-3.3}$ in home indicated that several heavy metals were generated from the sources within the house itself. An exceptional feature shown in the individual particles in workplace is that Cr, Mn, and Co were clearly detected in both fine and coarse particles. Cluster analysis suggested that the individual coarse particles ($PM_{4.7-3.3}$) collected at the indoor of factory were chemically heterogeneous and they modified with sea-salt, mineral, and artificially derived elements. The principal components in individual coarse particles collected at restaurant were sea-salt and mineral without mixing with harmful trace elements like chromium and manganese. Compared to the indoor fine particles of home and restaurant, many elements, especially, Cl, Na, Cr, Mn, Pb, and Zn showed overwhelmingly high net-counts in those of factory.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.7 no.1
• /
• pp.81-89
• /
• 2005

The experiment was conducted to evaluate the effect of fruit skin spray of the lime fertilizer in 'Campbell Early' grapes. The T-N, P, K, Ca and Mg of fruit skin and cluster weight, berry weight, cluster length showed no difference between control and lime fertilizer. But soluble solids in fruit was reduced by fruit skin spray of liquid calcium fertilizer extracted from oyster shell after bagging(LCaB). The anthocyanin content of fruit skin was decreased by air-slaked lime(HCa) and LCaB treatment. Also, occurrence of fruit skin bloom was significantly reduced by HCa and oyster shell powder(OS-CaP) treatment. The berry firmness was significantly increased through liquid calcium fertilizer extracted from oyster shell(LCa) and HCa treatment. Conspicuously, berry elasticity was rather decreased by OS-CaP treatment. However, there was no difference of weight loss of fruit among treatments during room temperature storage.

• Korean Journal of Community Nutrition
• /
• v.12 no.3
• /
• pp.352-360
• /
• 2007

Several nutrients are known to affect bone mineral density (BMD). However, these nutrients are combined with food intake and dietary patterns and little is known about the association of dietary patterns and BMD. The objective of this study was to investigate the association of dietary patterns with BMD in Korea Genome Epidemiology Study subjects. Among 2,884 women (40-69 yr) recruited at baseline study (2001), 861 subjects with BMD measurements at baseline and a 4-year follow up study (2005) completed the semi-quantitative food frequency questionnaire. BMD was measured by the Quantitative Ultrasound method. One hundred three food items were combined into 17 food groups and 4 dietary patterns were identified by factor analysis. Cluster analysis using factor score classified each subject into one of three dietary pattern groups named 'Rice and kimchi eating' (n = 617), 'Contented eating' (n = 124), and 'Healthy and light eating' (n = 120). The 'Healthy and light eating' group, characterized by higher intake of fruit, vegetables, fish, milk and dairy products, and younger age, more exercise, higher education, and higher income than other groups. The tibia BMD of the 'Healthy and light eating' group was higher than the other groups after adjusting for the age. After the adjustment for the age BMI and exercise, the 'Healthy and light eating' group showed significantly lower odds of tibia osteopenia/osteoporosis risk compared to the 'Rice and kimchi eating' group both at the baseline [OR(95% CI) : 0.50(0.30-0.84)] and follow-up [OR(95% CI) : 0.59(0.36-0.97)] examinations. The dietary pattern with low calorie and high intakes of fruit, vegetables, fish, milk and dairy products may have beneficial effects on BMD in middle-aged women.

• Journal of the Mineralogical Society of Korea
• /
• v.20 no.3
• /
• pp.147-153
• /
• 2007

Kaolinite [$Al_2Si_2O_5(OH)_4$] was successfully synthesized by a hydrothermal process from amorphous $Al(OH)_3$ and $SiO_2$ at $230^{\circ}C$ under the pressure of $30 kg/cm^2$. The experiments were performed varying temperatures ($180{\sim}280^{\circ}C$), pressure ($10{\sim}60kg/cm^2$), chemistry ($Al_2O_3/SiO_2 = 0.5{\sim}0.38$) and pH ($0.3{\sim}9.5$) of the solution. The autoclaving was carried out in a closed stainless steel vessel. Kaolinite appears from the starting composition of $Al_2O_3/SiO_2= 0.5$ with boehmite and was stable as a single phase with the composition of $Al_2O_3/SiO_2=0.45$. Boehmite was a stable phase below $200^{\circ}C$ for the 240 h period of autoclaving, but kaolinite appeared even in 20 h at $230^{\circ}C$. The single kaolinite phase of a good crystallinity was observed at pH ranging 2 to 6. That indicates that pH is one of the most critical parameters for the successful formation of kaolinite. The optimal molar ratio of $Al_2O_3$ to $SiO_2$ was determined to be 0.45. The XRD pattern of the synthesized kaolinite coincided with that of natural one and its morphology was the cluster type of the kaolinite crystals (diameter = ${\sim}3{\mu}m$), irrespective of starting material, composition and temperature.