• Economic and Environmental Geology
• /
• v.40 no.5
• /
• pp.551-561
• /
• 2007

This case study is about the sampling and interpretation of soil pore water in order to understand and to predict the diffusion and behavior of soil pollution. For the measurement of polycyclic aromatic hydrocarbons(PAHs) in two representative hydrocarbon-contaminated sites, the extraction system of the soil pore water was set up with respect to soil depths and the behavior of contaminants was interpreted. The soil solution extraction system consisted of peristaltic pump, and extraction and sampling compartment, and can measure simultaneously the soil water pressure. The concentration of PAHs with respect to extraction pressure and time decreased due to dilution through soil pore water. Particularly, the concentration of PAHs was more reduced under the unsaturated oxic condition than saturated anoxic condition. Therefore, the soil solution extraction with respect to soil water pressure can interpret the extent of equilibrium between porewater and soil surface.

• Korean Journal of Environment and Ecology
• /
• v.23 no.1
• /
• pp.56-65
• /
• 2009

In Korea, Red pine(Pinus densiflora) stands at a very important place, historically, culturally, and emotionally and it is one of the tree species that can produce domestic timber as forest resources economically. The growing space for Red pine forest in Korea is gradually reducing while the space for deciduous tree forests including oak series is gradually increasing. Thus, it is required that the research work should be done on renewal for pine forest retention and its related forest management practices. This research aims at developing stable, sustainable management forests and inducing nature renewal by grasping growth environment and succession process through the pattern of stand and structure analysis of the red pine(Pinus densiflora) for central region. The pine forests in central region were classified into four communities, such as Acer pseudo-sibolianum, Quercus acutissima, Lindera erythrocarpa, and Pinus densiflora and they are showing different characteristics by pattern according to their growing district. There appeared a lot of red pines in the upper layer, but there existed high weight of broad-leaved forest tree species, such as oak series in the middle layer and the appearance of the red pine was meager in the lower layer. Therefore, it appears that the red pine has a high influential ecological strength in terms of correlativity; however, if the red pine in tree layer is dead by aging in nature state with the lapse of time, it is considered that oak species, such as Quercus mongolica, Quercus variabilis, and Quercus serrata will be dominant below sub-tree layer. In addition, there appear differences in characteristics and growth pattern of the red pine forest depending on stand pattern, so it is considered that a differential application method should be employed in the pine forest management.

• Resources Recycling
• /
• v.22 no.3
• /
• pp.91-99
• /
• 2013

Steel industry which has been accomplishes the base of our country economy, automobile and electronic industry are taking charge of the role, whose electroplating is important. Large amount of wastewater and various metal salts, including hazardous materials was generated from the electroplating pre-treatment, plating, washing and post-plating. Currently, the general wastewater follows in the environmental law and neutralization after controlling, sludge where the various metal is mixed reclaims below multiple regulative and trust it is controlling. The sludge which includes the gas price metal reclaims in the field and trust it controls. a reclamation price of land it is insufficient but and the control expense holds plentifully and it loses the gas price metal which is valuable. Consequently, The research regarding to recover a gas price metal actively from this waste water, it is advanced. A new method to recover valuable metals from electroplating wastewater synthesis of metal sulfides using topical methods utilizing iron oxidizing bacteria, reagent of sulfides and solvent extraction using an organic solvent, such as the development of the law to recover these metals and metal sulfides of wastewater using selective recovery have been studied. By using these wastewater treatment method under frequency above 95%, it has been obtained the valuable metal from the wastewater, where the metal ion of Fe, Cu, Zn and Ni complexes was mixed. As we discuss the wastewater, which has been discharged from electroplating process, it is important and will be applied to the resources of metal in the urban mine.

• Journal of agriculture & life science
• /
• v.43 no.6
• /
• pp.7-17
• /
• 2009

The objectives of this study were to analyze vegetation type and stand structure of the red pine (Pinus densiflora) in Kangwon northern region for stable and sustainable management forests. The pine forests in study sites were classified into 3 communities, 5 groups, and 2 subgroups, total 7 vegetation units. Species with constance degree of more than 61% were P. densiflora, Quercus mongolica, Lindera obtusiloba, Spodiopogon sibiricus, Atractylodes japonica, Rhododendron mucronulatum, and Carex humilis. They were showing different characteristics by pattern according to their growing district. In the importance value (I.V.) analysis of each layer, P. densiflora showed highly in tree layer while in other layers Quercus spp. was high. Especially, young P. densiflora tree hardly appeared in the herb layer, but broad-leaved trees and shrub species showed high I.V.. Furthermore, the annual ring growth of P. densiflora was reduced while that of Q. spp. increased. According to analysis of stand structures and annual ring growths, it is considered that appropriate silvicultual practice methods should be employed to remove rival broad-leaved species for maintenance of sustainable red pine forests considering the characteristics of each stand.

• Korean Journal of Soil Science and Fertilizer
• /
• v.48 no.1
• /
• pp.57-63
• /
• 2015

Bioavailability of cadmium (Cd) and arsenic (As) can be different depending on soil pH. For this reason, main purpose of this research was to compare bioavailability of Cd and As in agricultural field under varied soil pH and different extractants. Bioavailable fraction of Cd and As in soil was extracted with $CaCl_2$, $NaNO_3$, DTPA, EDTA, and low molecular weight organic acids (LMWOAs). Soil samples and cultivated crops were collected at the range of soil pH 4.5-8.5 and correlation analysis was conducted between bioavailable fraction of Cd and As in soil and total concentration of Cd and As in crops. Results showed that concentration of Cd and As in acidic soil was ranged $0.002-0.462mg\;kg^{-1}$ and $0.041-4.903mg\;kg^{-1}$ respectively. In alkaline condition, concentration of Cd and As were ranged $0.006-0.351mg\;kg^{-1}$ and $0.039-2.807mg\;kg^{-1}$ respectively. Comparing bioavailable fraction of Cd and As in acidic and alkaline soil condition, higher concentration was measured in acidic condition. Similarly, higher average concentration of Cd and Asin crops was observed in acidic condition (0.398 and $0.751mg\;kg^{-1}$ respectively) than alkaline condition (0.248 and $0.264mg\;kg^{-1}$). Among different extractants, LMWOAs method showed higher correlation ($r^2=0.545$) for Cd in acidic condition indicating that LMWOAs method could be applied for evaluating bioavailability of Cd in acidic soil. However, no high correlation was observed for As in both acidic and alkaline condition. Overall, bioavailable fraction of Cd and As can be higher in acidic condition of soil than alkaline condition resulting higher uptake of Cd and As from soil to crops. Therefore, efficient best management practice (BMPs) for Cd and As in acidic soil should be conducted for minimizing uptake of Cd and As into crops.

• Economic and Environmental Geology
• /
• v.47 no.4
• /
• pp.405-420
• /
• 2014

To investigate geochemical characteristics of soil and atmospheric environments by anthropogenic source, we have analyzed and determined heavy metal concentrations of the surface soils beneath roadside trees and leaves of Platanus occidentalis from 52 points in Seoul during autumn 2001. For comparison of the contents of heavy metal for the soil and leaf, we have analyzed heavy metal contents of the surface soils beneath roadside trees and leaves from 2 points in rural area of Yesan during the same time period. The composition of heavy metals of soils are relatively high for Cd, Co, Cr and Ni in industrial area (IA, Industrial Area) and high for Cu, Pb and Zn in heavy traffic area (HTA, Heavy Traffic Area). The heavy metal contents of rural area in Seoul are higher than those in Yesan. The differences of chemical compositions between the washed and unwashed leaves are high for Cd, Cu, Pb and Zn in the HTA. The element couples of Cd-Co, Cr-Ni and Pb-Zn for the soils had shown a good correlation and their contamination sources could be similar. The relationship for Pb-Cu and Cu-Zn showed good correlation in Platanus leaves. The relationship between soils and unwashed leaves show a good correlation for Cr, Cu, Pb and Zn but low correlation for Cd, Co, Fe, Mn and Ni. It is thought that the Cr, Cu, Pb and Zn were derived from contaminants of soils, whereas Cd, Co, Fe, Mn and Ni were originated from atmospheric source. From the spatial variations of elements for soils and leaves, Ni and Cr were dominant in the soils of IA and Cd, Cu and Zn were dominant in those of HTA. The Contamination by Cd-Pb and Cu-Zn in unwashed leaves were analyzed to show similar patterns. Using the enrichment factors (EF) of heavy metals in unwashed leaves, the EF sequences were to be Cu, Zn, Pb, Mn, Co, Ni, Cd and Cr. We identified that Cu, Zn, Pb and Mn were most problematic of environmental hazard in Seoul.

• Economic and Environmental Geology
• /
• v.45 no.2
• /
• pp.121-135
• /
• 2012

Soil dispersion and heavy metal leaching with two heavy metal-contaminated soils were studied to derive the optimal dispersion condition in the course of developing the remedial technology using magnetic separation. The dispersion solutions of pyrophosphate, hexametaphosphate, orthophosphate and sodium dodecylsulfate (SDS) at 1 - 200 mM and the pH of solutions was adjusted to be 9 - 12 with NaOH. The clay content of suspension as an indicator of dispersion rate and the heavy metal concentration of the solution were tested at the different pHs and concentrations of the dispersion solution during the experiment. The dispersion rate increased with increasing the pH and dispersion agent concentration of the solution. The dispersion efficiency of the agents showed as follows: pyrophosphate > hexametaphosphate > SDS > orthophosphate. Arsenic leaching was sharply increased at 50 mM of phosphates and 100 mM of SDS. The adsorption of $OH^-$, phosphates and dodecysulfate on the surface of Fe- and Mn-oxides and soil organic matter and the broken edge of clay mineral might decrease the surface charge and might increase the repulsion force among soil particles. The competition between arsenic and $OH^-$, phosphates and dodecylsulfate for the adsorption site of soil particles might induce the arsenic leaching. The dispersion and heavy metal leaching data indicate that pH 11 and 10 mM pyrophosphate is the optimum dispersion solution for maximizing dispersion and minimizing heavy metal leaching.

• Journal of Soil and Groundwater Environment
• /
• v.13 no.5
• /
• pp.81-87
• /
• 2008

In accompany with the transfer of US army bases, recent surveys reported serious contamination of soils by the release of petroleum from storage facilities and heavy metals accumulated in rifle-ranges. These problems have made an increased concerns of cleanup technology for contaminated soils. In this study, a full-scale soil washing process improved by multistage continuous desorption and agitational desorption techniques was examined for petroleum-contaminated soils obtained from three different remedial sites that contained 29.3, 16.6, and 7.8% of silt and clay, respectively. The initial concentrations of total petroleum hydrocarbon (TPH) were 5,183, 2,560, and 4,860 mg/kg for each soil. Pure water was applied to operate washing process, in which water used for washing process was recycled 100% for over 6 months. The results of full-scale washing tests showed that the TPH concentrations for soils (> 3.0 mm) were 50${\sim}$356 mg/kg (85.2${\sim}$98.2% removal rates), regardless of the contents of silt and clay from in A, B and C soil, when the soils were washed at 3.0 kg/$cm^2$ of injection pressure with the method of wet particle separation. Based on the initial TPH concentration, the TPH removal rates for each site were 85.2, 98.2 and 89.9%. For soils in the range of 3.0${\sim}$0.075 mm, the application of first-stage desorption technique as a physical method resulted 834, 1,110, and 1,460 mg/kg of TPH concentrations for each soil, also additional multi-stage continuous desorption reduced the TPH concentration to 330, 385, and 245 mg/kg that were equivalent to 92.4, 90.6, and 90.1% removal rates, respectively. The result of multi-stage continuous desorption for fine soil (0.075${\sim}$0.053 mm) were 791, 885, and 1,560 mg/kg, and additional agitation desorption showed 428, 440, and, 358 mg/kg of TPH concentrations. Compared with initial concentration, the removal rates were 92.0, 93.9 and 92.9%, respectively. These results implied we could apply strategic process of soil washing for varies types of contaminated soils to meet the regulatory limit of TPH.

• Journal of the Korean Geosynthetics Society
• /
• v.15 no.4
• /
• pp.71-78
• /
• 2016

In this study, execution costs of the foundation system are compared with PHC and steel pile in the same soil layers and load condition. Steel piles installed on the thin weathered rock are reduced as 12.5% in comparison with the number of PHC piles. Steel piles installed on the soft rock through weathered rock with 1.7m of thickness reduce the number of piles as 35.7% (STK 400) and 46.4% (STK 490), respectively, in comparison with PHC piles installed on the weathered rock. Also, they reduce the number of piles as 26.5% (STK 400) and 38.8% (STK 490), respectively, in comparison with steel piles (STK 400) installed on the weathered rock. When the thickness of footings is constant, steel piles installed on the soft rock may reduce the area of footings up to 12.2% (STK 400) and 45.4% (STK 490), respectively, in comparison with PHC piles installed on the weathered rock. Total cost of foundation system installed on the soft rock with steel piles (STK 400) increases as 12%, whereas in case of replaced with steel piles (STK 490), it reduces as 16% in comparison with PHC piles installed on the weathered rock. This is because the cost reduction due to the number of piles and footing area is more effective despite high cost of steel piles (STK 490). When the thickness of weathered rock is less than 5m, installing steel piles (STK 490) on the soft rock through it is more economic in comparison with installing PHC piles on the weathered rock.

• Korean Journal of Soil Science and Fertilizer
• /
• v.41 no.1
• /
• pp.1-8
• /
• 2008

The objectives of this study were to compare nutrient natural input between thinned and unthinned natural hardwood stands at Mt. Joongwang, Pyongchang-gun, Gangwon-do. Throughfall, stemflow, A-layer and B-layer soil water as well as litterfall were sampled at two-week intervals during the period of June to October from 2002 to 2004. The amount of rainfall interception in thinned and unthinned natural hardwood stands was as 12% and 18%, respectively. The results indicated that there was no difference in annual nutrient input by rainfall between thinned and unthinned stands. $Na^+$, $Cl^-$ and $SO_4{^{2-}}$ concentrations of A-layer soil water in the unthinned stand were higher than those in the thinned stand. In the B-layer soil water, $Ca^{2+}$, $Cl^-$, $NO_3{^-}$ and $SO_4{^{2-}}$ concentrations in the unthinned stand were higher than those in thinned stand. Mean annual litterfall input was $2,706kg\;ha^{-1}$ in unthinned stand and $2,589kg\;ha^{-1}$ in thinned stand. Total-N input from litterfall was $50.28kg\;ha^{-1}yr^{-1}$ in the unthinned stand and $36.81kg\;ha^{-1}yr^{-1}$ in the thinned stand, while there was no difference in exchangeable cation input from litterfall between thinned and unthinned stands. Thus, the difference in nutrient inputs except for N by throughfall, stemflow and litterfall between the two stands was not influenced by thinning.