• Safety and Health at Work
• /
• v.12 no.4
• /
• pp.522-529
• /
• 2021

Background: Burnout syndrome (BOS) is defined by the World Health Organization (WHO) as a syndrome conceptualized as resulting from chronic workplace stress that has not been successfully managed. This study aims to create the Korean version burnout syndrome scale (KBOSS) that conforms to WHO's definition of BOS and present the cut-off points for screening. Methods: We developed the KBOSS based on WHO's definition of BOS. An online survey was conducted through a specialized online research company. We recruited 444 workers for this research. The validity of the KBOSS was assessed using factor analysis and Pearson's correlation. The KBOSS reliability was assessed using Cronbach's alpha coefficient. The cut-off points for each of the three dimensions were derived using the upper quartile score. Results: The validity and reliability of the KBOSS were good. Regarding reliability, the scale's overall Cronbach's alpha was 0.813. Cronbach's alpha of each three-dimension was as follows: exhaustion, 0.916; cynicism, 0.865; and professional inefficacy, 0.819. The cut-off points of BOS three dimensions are exhaustion S 21; cynicism S 18; and inefficacy S 15. Conclusion: The developed questionnaire (KBOSS) can be a useful tool for screening of BOS.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.5
• /
• pp.129-139
• /
• 2012

Given digraph network $D=(N,A),n{\in}N,a=c(u,v){\in}A$ with source s and sink t, the maximum flow from s to t is determined by cut (S, T) that splits N to $s{\in}S$ and $t{\in}T$ disjoint sets with minimum cut value. The Ford-Fulkerson (F-F) algorithm with time complexity $O(NA^2)$ has been well known to this problem. The F-F algorithm finds all possible augmenting paths from s to t with residual capacity arcs and determines bottleneck arc that has a minimum residual capacity among the paths. After completion of algorithm, you should be determine the minimum cut by combination of bottleneck arcs. This paper suggests maximum adjacency merging and compute cut value method is called by MA-merging algorithm. We start the initial value to S={s}, T={t}, Then we select the maximum capacity $_{max}c(u,v)$ in the graph and merge to adjacent set S or T. Finally, we compute cut value of S or T. This algorithm runs n-1 times. We experiment Ford-Fulkerson and MA-merging algorithm for various 8 digraph. As a results, MA-merging algorithm can be finds minimum cut during the n-1 running times with time complexity O(N).

• Horticultural Science & Technology
• /
• v.31 no.5
• /
• pp.538-543
• /
• 2013

During summer in Korea, the excessively high temperature causes growth retardation and quality reduction in cut roses grown in greenhouse. Mist treatments were conducted to reduce the temperature and avoid quality reduction of cut roses. The temperature change in the greenhouse, growth and quality of cut roses, and injuries caused by insects or fungi were investigated during mist treatment. Daily maximum temperature reduced as the number of mist treatment increased, resulting in $6^{\circ}C$ reduction by mist treatment for 10 seconds at 5 min interval. This temperature reduction occurred only when maximum temperature was over $40^{\circ}C$ in greenhouse, and not when it was less than $40^{\circ}C$ or rainy and/or cloudy day. Plant height and fresh weight of the cut roses were increased at the range of 10-20% by mist treatment. As frequency of mist treatment increased, however, malformed flowers increased and vase life of cut rose was largely shortened. The injuries by insects like as beet armyworm larvae and scale insect increased as well. In conclusion, it is recommended that mist treatment must be used when the daily maximum temperature in a green house is over $40^{\circ}C$ and forecasting for disease or insects should be conducted as well.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.8 no.5
• /
• pp.102-107
• /
• 1999

In this paper hardened SCM440 material and annealed SCM440 material are for cutting experiments by the cutting con-dition which is chosen respectively by tool three components of cutting force are recorded using multicorder, Then the surface roughness for various force are measured by Roughness Tester. The results of the experiment are summarized as follow. The hardened material cut by ceramic tool(BX20) gives the highest radial component values among the cutting resistance radial components is increased higher for the higher cutting speed even though vertical component and axial component tend to decrease. But when the annealed material was cut increase in cutting speed results in the increase of three component forces. Since ceramic insert tip used the experiment hardly affect Built-up Edge and heat the cutting resistance decrease slightly regardless of the increased of cutting speed. The hardened material has higher three compo-nent force value than the annealed material because the material of high hardness is increased cutting resistance. The low-est cutting forces for hardened material and annealed material are shown in the cutting speed of 60m/min and 180m/min. respectively.

• Journal of the Korea Computer Industry Society
• /
• v.7 no.3
• /
• pp.145-154
• /
• 2006

This paper improves algorithms of Speculative Partial Redundancy Elimination(SPRE) proposed by Knoop et al. Improving SPRE algorithm performs the execution speed optimization based on the information of the execution frequency from profiling and the memory space optimization. The first purpose of presented algorithm is to reduce in space requirements and the second purpose is to de crease the execution time. Since too much weight on execution speed optimization may cause the explosion of the memory space, it is important to consider the size of memory. This fact can be a big advantage in the embedded system which concerns the required memory size more than the execution speed In this paper we implemented the min-cut algorithm, and this algorithm used the control flow graph is constructed with network and partitioned.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.5 s.182
• /
• pp.44-50
• /
• 2006

This paper describs about the technique of ultra-precision machining for an infrared(IR) camera aspheric mirror. A 200 mm diameter aspheric mirror was fabricated by SPDTM(Single Point Diamond Turning Machine). Aluminum alloy as mirror substrates is known to be easily machined, but not polishable due to its ductility. Aspheric large reflector without a polishing process, the surface roughness of 5 nm Ra, and the form error of ${\lambda}/2\;({\lambda}=632.8\;nm)$ for reference curved surface 200 mm has been required. The purpose of this research is to find the optimum machining conditions for cutting reflector using Al6061-T651 and apply the SPDTM technique to the manufacturing of ultra precision optical components of Al-alloy aspheric reflector. The cutting force and the surface roughness are measured according to each cutting conditions feed rate, depth of cut and cutting speed, using diamond turning machine to perform cutting processing. As a result, the surface roughness is good when feed rate is 1mm/min, depth of cut $4{\mu}m$ and cutting speed is 220 m/min. We could machined the primary mirror for IR camera in diamond machine with a surface roughness within $0.483{\mu}m$ Rt on aspheric.

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2003.10a
• /
• pp.167.1-167
• /
• 2003

To maintain high quality and to extend the shelf life of intact and minimally processed apple cubes, the effect of heat shock on the texture and color of apple cubes (Fuji) was evaluated in this study. After peeled and cored, the apples were cut into cubes of 1.5 cm. The heat shock was immersion in heated water from 25$^{\circ}C$ to 95$^{\circ}C$ in 10$^{\circ}C$ increments for 2 min and cooling to storage temperature as soon as possible after heat treatment. The effect of heat treatment in terms of color and texture measurements with respect to time was investigated, respectively during 7 days storage at in LDPE film bags without sealing at 4$^{\circ}C$, and 95% relative humidity air. Results suggest that heat shock (55$^{\circ}C$, 2 min) may have effectively delayed browning, and there were significant changes in color of apple cube when the temperature of heat shock is above 75$^{\circ}C$. And hardness, stiffness and firmness, which were used to describe texture, behaved similarly in the textural qualities. It was shown that the texture of the apple cubes was decreased with temperature increase. The value of them were most decreased to 70% of the initial ones after treated with 85$^{\circ}C$ and 95$^{\circ}C$ on the lust day.

• Journal of Sensor Science and Technology
• /
• v.3 no.2
• /
• pp.3-10
• /
• 1994

The use of preformed polymers and their cross-linking has been attempted in order to improve the intrinsic fragility of monolayers and Langmuir-Blodgett(LB) films. The evaluation of the characteristics of the LB multi-layer by using an AT-cut quartz crystal has been also attempted. This study reveals that the polyether pendants of 2C18VE3 lie at the air-water interface at low surface pressures and are forced down into the subphase when the monolayers are compressed. This characteristic behavoir of the pendant polyethers is very clear on aqueous poly allyl amine(PAA) and is also observeable on saturated aqueous NaCl and $CaCl_{2}$. And the characteristics of LB multi-layers could be evaluated by using AT-cut quartz crystal in situ.

• Design & Manufacturing
• /
• v.14 no.2
• /
• pp.14-20
• /
• 2020

In OLED panel production process, it is necessary to cut a part of protective film as a preprocess for lighting inspection. The current method is to recognize only the fiducial mark of the cut-out panel. Bare Glass Cutting does not compensate for machining cumulative tolerances. Even though process defects still occur, it is necessary to develop technology to solve this problem because only the Align Mark of the panel that has already been cut is used as the reference point for alignment. There is a lot of defective lighting during panel lighting test because the correct protective film is not cut on the panel power and signal application pad position. In laser cutting process to remove the polarizing film / protective film / TSP film of OLED panel, laser processing is not performed immediately after the panel alignment based on the alignment mark only. Therefore, in this paper, we performed real time inspection which minimizes the mechanism tolerance by correcting the laser cutting path of the protective film in real time using Machine Vision. We have studied calibration algorithm of Vision Software coordinate system and real image coordinate system to minimize inspection resolution and position detection error and edge detection algorithm to accurately measure edge of panel.

• Journal of KIISE:Computer Systems and Theory
• /
• v.27 no.3
• /
• pp.277-286
• /
• 2000

Switch-based network is suitable for the environment of demanding high performance network. Traditional shared-medium Local Area Networks(LANs) do not provide sufficient throughput and latency. Specially, communication performance is more important with multimedia application. In these environments, switch-based network results in high performance. A kind of switch-based network provides higher bandwidth and low latency. Thus high-speed switch is essential to build switch-based LANs. An effective switch design is the most important factor of the switch-based network performance, and is required for the multicast message processing. In the previous cut-through switching technique, switch element reconfiguration has the capability of multicasting and deadlock-free. However, it has problems of low throughput as well as large scale of switch. Therfore, effective multicating can be implemented by using divided hardware unicast and multicast. The objective of this thesis is to suggest switch configuration with these features.